From: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
To: shli@fb.com
Cc: linux-raid@vger.kernel.org,
Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Subject: [PATCH] raid5-ppl: two minor improvements
Date: Fri, 10 Mar 2017 16:40:44 +0100 [thread overview]
Message-ID: <20170310154044.11198-1-artur.paszkiewicz@intel.com> (raw)
In-Reply-To: <20170309233240.r64itd7oreuxkumz@kernel.org>
- Remove 'page_result' parameter from ppl_xor() and always write result
to 'page1'.
- Use blkdev_issue_flush() instead of open coding the flush bio
submission.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
---
drivers/md/raid5-ppl.c | 18 +++++-------------
1 file changed, 5 insertions(+), 13 deletions(-)
diff --git a/drivers/md/raid5-ppl.c b/drivers/md/raid5-ppl.c
index ca1ef644351a..2419fbc6f684 100644
--- a/drivers/md/raid5-ppl.c
+++ b/drivers/md/raid5-ppl.c
@@ -524,8 +524,7 @@ void ppl_stripe_write_finished(struct stripe_head *sh)
ppl_io_unit_finished(io);
}
-static void ppl_xor(int size, struct page *page1, struct page *page2,
- struct page *page_result)
+static void ppl_xor(int size, struct page *page1, struct page *page2)
{
struct async_submit_ctl submit;
struct dma_async_tx_descriptor *tx;
@@ -533,7 +532,7 @@ static void ppl_xor(int size, struct page *page1, struct page *page2,
init_async_submit(&submit, ASYNC_TX_ACK|ASYNC_TX_XOR_DROP_DST,
NULL, NULL, NULL, NULL);
- tx = async_xor(page_result, xor_srcs, 0, 2, size, &submit);
+ tx = async_xor(page1, xor_srcs, 0, 2, size, &submit);
async_tx_quiesce(&tx);
}
@@ -724,7 +723,7 @@ static int ppl_recover_entry(struct ppl_log *log, struct ppl_header_entry *e,
goto out;
}
- ppl_xor(block_size, page1, page2, page1);
+ ppl_xor(block_size, page1, page2);
indent -= 2;
}
@@ -747,7 +746,7 @@ static int ppl_recover_entry(struct ppl_log *log, struct ppl_header_entry *e,
goto out;
}
- ppl_xor(block_size, page1, page2, page1);
+ ppl_xor(block_size, page1, page2);
}
/* map raid sector to parity disk */
@@ -846,14 +845,7 @@ static int ppl_recover(struct ppl_log *log, struct ppl_header *pplhdr)
}
/* flush the disk cache after recovery if necessary */
- if (test_bit(QUEUE_FLAG_WC, &bdev_get_queue(rdev->bdev)->queue_flags)) {
- struct bio *bio = bio_alloc_bioset(GFP_KERNEL, 0, ppl_conf->bs);
-
- bio->bi_bdev = rdev->bdev;
- bio->bi_opf = REQ_OP_WRITE | REQ_PREFLUSH;
- ret = submit_bio_wait(bio);
- bio_put(bio);
- }
+ ret = blkdev_issue_flush(rdev->bdev, GFP_KERNEL, NULL);
out:
__free_page(page);
return ret;
--
2.11.0
next prev parent reply other threads:[~2017-03-10 15:40 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-09 8:59 [PATCH v5 0/7] Partial Parity Log for MD RAID 5 Artur Paszkiewicz
2017-03-09 8:59 ` [PATCH v5 1/7] md: superblock changes for PPL Artur Paszkiewicz
2017-03-09 8:59 ` [PATCH v5 2/7] raid5: separate header for log functions Artur Paszkiewicz
2017-03-09 8:59 ` [PATCH v5 3/7] raid5-ppl: Partial Parity Log write logging implementation Artur Paszkiewicz
2017-03-09 23:24 ` Shaohua Li
2017-03-10 15:16 ` Artur Paszkiewicz
2017-03-10 18:15 ` Shaohua Li
2017-03-10 18:42 ` Dan Williams
2017-03-21 22:00 ` NeilBrown
2017-03-24 16:46 ` Shaohua Li
2017-03-28 14:12 ` Artur Paszkiewicz
2017-03-28 16:16 ` Shaohua Li
2017-04-16 22:58 ` Greg Thelen
2017-04-19 8:48 ` [PATCH] uapi: fix linux/raid/md_p.h userspace compilation error Artur Paszkiewicz
2017-04-19 16:59 ` Greg Thelen
2017-04-20 16:41 ` Shaohua Li
2017-03-09 9:00 ` [PATCH v5 4/7] md: add sysfs entries for PPL Artur Paszkiewicz
2017-03-09 9:00 ` [PATCH v5 5/7] raid5-ppl: load and recover the log Artur Paszkiewicz
2017-03-09 23:30 ` Shaohua Li
2017-03-10 15:23 ` Artur Paszkiewicz
2017-03-09 9:00 ` [PATCH v5 6/7] raid5-ppl: support disk hot add/remove with PPL Artur Paszkiewicz
2017-03-09 9:00 ` [PATCH v5 7/7] raid5-ppl: runtime PPL enabling or disabling Artur Paszkiewicz
2017-03-09 23:32 ` [PATCH v5 0/7] Partial Parity Log for MD RAID 5 Shaohua Li
2017-03-10 15:40 ` Artur Paszkiewicz [this message]
2017-03-10 18:16 ` [PATCH] raid5-ppl: two minor improvements Shaohua Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170310154044.11198-1-artur.paszkiewicz@intel.com \
--to=artur.paszkiewicz@intel.com \
--cc=linux-raid@vger.kernel.org \
--cc=shli@fb.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).