Linux RAID subsystem development
 help / color / mirror / Atom feed
From: Guoqing Jiang <gqjiang@suse.com>
To: shli@kernel.org
Cc: linux-raid@vger.kernel.org, Guoqing Jiang <gqjiang@suse.com>
Subject: [PATCH V2] md: simplify code with bio_io_error
Date: Fri, 21 Jul 2017 16:33:44 +0800	[thread overview]
Message-ID: <20170721083344.32134-1-gqjiang@suse.com> (raw)

Since bio_io_error sets bi_status to BLK_STS_IOERR,
and calls bio_endio, so we can use it directly.

And as mentioned by Shaohua, there are also two
places in raid5.c can use bio_io_error either.

Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
---
V2:
No changes, just rebased on latest kernel tree.

 drivers/md/raid1.c  | 3 +--
 drivers/md/raid10.c | 6 ++----
 drivers/md/raid5.c  | 9 +++------
 3 files changed, 6 insertions(+), 12 deletions(-)

diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index 1d235cc..f50958d 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -790,8 +790,7 @@ static void flush_bio_list(struct r1conf *conf, struct bio *bio)
 		bio->bi_next = NULL;
 		bio->bi_bdev = rdev->bdev;
 		if (test_bit(Faulty, &rdev->flags)) {
-			bio->bi_status = BLK_STS_IOERR;
-			bio_endio(bio);
+			bio_io_error(bio);
 		} else if (unlikely((bio_op(bio) == REQ_OP_DISCARD) &&
 				    !blk_queue_discard(bdev_get_queue(bio->bi_bdev))))
 			/* Just ignore it */
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index e2617d0..f55d4cc 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -905,8 +905,7 @@ static void flush_pending_writes(struct r10conf *conf)
 			bio->bi_next = NULL;
 			bio->bi_bdev = rdev->bdev;
 			if (test_bit(Faulty, &rdev->flags)) {
-				bio->bi_status = BLK_STS_IOERR;
-				bio_endio(bio);
+				bio_io_error(bio);
 			} else if (unlikely((bio_op(bio) ==  REQ_OP_DISCARD) &&
 					    !blk_queue_discard(bdev_get_queue(bio->bi_bdev))))
 				/* Just ignore it */
@@ -1090,8 +1089,7 @@ static void raid10_unplug(struct blk_plug_cb *cb, bool from_schedule)
 		bio->bi_next = NULL;
 		bio->bi_bdev = rdev->bdev;
 		if (test_bit(Faulty, &rdev->flags)) {
-			bio->bi_status = BLK_STS_IOERR;
-			bio_endio(bio);
+			bio_io_error(bio);
 		} else if (unlikely((bio_op(bio) ==  REQ_OP_DISCARD) &&
 				    !blk_queue_discard(bdev_get_queue(bio->bi_bdev))))
 			/* Just ignore it */
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index aeeb8d6..4904dff 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -3381,9 +3381,8 @@ handle_failed_stripe(struct r5conf *conf, struct stripe_head *sh,
 			sh->dev[i].sector + STRIPE_SECTORS) {
 			struct bio *nextbi = r5_next_bio(bi, sh->dev[i].sector);
 
-			bi->bi_status = BLK_STS_IOERR;
 			md_write_end(conf->mddev);
-			bio_endio(bi);
+			bio_io_error(bi);
 			bi = nextbi;
 		}
 		if (bitmap_end)
@@ -3403,9 +3402,8 @@ handle_failed_stripe(struct r5conf *conf, struct stripe_head *sh,
 		       sh->dev[i].sector + STRIPE_SECTORS) {
 			struct bio *bi2 = r5_next_bio(bi, sh->dev[i].sector);
 
-			bi->bi_status = BLK_STS_IOERR;
 			md_write_end(conf->mddev);
-			bio_endio(bi);
+			bio_io_error(bi);
 			bi = bi2;
 		}
 
@@ -3429,8 +3427,7 @@ handle_failed_stripe(struct r5conf *conf, struct stripe_head *sh,
 				struct bio *nextbi =
 					r5_next_bio(bi, sh->dev[i].sector);
 
-				bi->bi_status = BLK_STS_IOERR;
-				bio_endio(bi);
+				bio_io_error(bi);
 				bi = nextbi;
 			}
 		}
-- 
2.10.0


             reply	other threads:[~2017-07-21  8:33 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-07-21  8:33 Guoqing Jiang [this message]
2017-07-21 20:16 ` [PATCH V2] md: simplify code with bio_io_error Shaohua Li

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170721083344.32134-1-gqjiang@suse.com \
    --to=gqjiang@suse.com \
    --cc=linux-raid@vger.kernel.org \
    --cc=shli@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox