From: Ming Lei <ming.lei@redhat.com>
To: Martin Steigerwald <martin@lichtvoll.de>
Cc: Oleksandr Natalenko <oleksandr@natalenko.name>,
Jens Axboe <axboe@kernel.dk>, Christoph Hellwig <hch@lst.de>,
linux-block@vger.kernel.org, linux-raid@vger.kernel.org,
linux-kernel@vger.kernel.org, Shaohua Li <shli@kernel.org>
Subject: Re: I/O hangs after resuming from suspend-to-ram
Date: Thu, 21 Sep 2017 06:20:12 +0800 [thread overview]
Message-ID: <20170920222011.GB5105@ming.t460p> (raw)
In-Reply-To: <3567128.t9myNOm9ia@merkaba>
On Mon, Aug 28, 2017 at 03:10:35PM +0200, Martin Steigerwald wrote:
> Ming Lei - 28.08.17, 20:58:
> > On Sun, Aug 27, 2017 at 09:43:52AM +0200, Oleksandr Natalenko wrote:
> > > Hi.
> > >
> > > Here is disk setup for QEMU VM:
> > >
> > > ===
> > > [root@archmq ~]# smartctl -i /dev/sda
> > > …
> > > Device Model: QEMU HARDDISK
> > > Serial Number: QM00001
> > > Firmware Version: 2.5+
> > > User Capacity: 4,294,967,296 bytes [4.29 GB]
> > > Sector Size: 512 bytes logical/physical
> > > Device is: Not in smartctl database [for details use: -P showall]
> > > ATA Version is: ATA/ATAPI-7, ATA/ATAPI-5 published, ANSI NCITS 340-2000
> > > Local Time is: Sun Aug 27 09:31:54 2017 CEST
> > > SMART support is: Available - device has SMART capability.
> > > SMART support is: Enabled
> > >
> > > [root@archmq ~]# lsblk
> > > NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
> > > sda 8:0 0 4G 0 disk
> > > `-sda1 8:1 0 4G 0 part
> > >
> > > `-md0 9:0 0 4G 0 raid10
> > >
> > > `-system 253:0 0 4G 0 crypt
> > >
> > > |-system-boot 253:1 0 512M 0 lvm /boot
> > > |-system-swap 253:2 0 512M 0 lvm [SWAP]
> > >
> > > `-system-root 253:3 0 3G 0 lvm /
> > >
> > > sdb 8:16 0 4G 0 disk
> > > `-sdb1 8:17 0 4G 0 part
> > >
> > > `-md0 9:0 0 4G 0 raid10
> > >
> > > `-system 253:0 0 4G 0 crypt
> > >
> > > |-system-boot 253:1 0 512M 0 lvm /boot
> > > |-system-swap 253:2 0 512M 0 lvm [SWAP]
> > >
> > > `-system-root 253:3 0 3G 0 lvm /
> > >
> > > sr0 11:0 1 1024M 0 rom
> > >
> > > [root@archmq ~]# mdadm --misc --detail /dev/md0
> > >
> > > /dev/md0:
> > > Version : 1.2
> > >
> > > Creation Time : Sat Jul 29 16:37:05 2017
> > >
> > > Raid Level : raid10
> > > Array Size : 4191232 (4.00 GiB 4.29 GB)
> > >
> > > Used Dev Size : 4191232 (4.00 GiB 4.29 GB)
> > >
> > > Raid Devices : 2
> > >
> > > Total Devices : 2
> > >
> > > Persistence : Superblock is persistent
> > >
> > > Update Time : Sun Aug 27 09:30:33 2017
> > >
> > > State : clean
> > >
> > > Active Devices : 2
> > >
> > > Working Devices : 2
> > >
> > > Failed Devices : 0
> > >
> > > Spare Devices : 0
> > >
> > > Layout : far=2
> > >
> > > Chunk Size : 512K
> > >
> > > Name : archiso:0
> > > UUID : 43f4be59:c8d2fa0a:a94acdff:1c7f2f4e
> > >
> > > Events : 485
> > >
> > > Number Major Minor RaidDevice State
> > >
> > > 0 8 1 0 active sync /dev/sda1
> > > 1 8 17 1 active sync /dev/sdb1
> > >
> > > ===
> > >
> > > In words: 2 virtual disks, RAID10 setup with far-2 layout, LUKS on it,
> > > then
> > > LVM, then ext4 for boot, swap and btrfs for /.
> > >
> > > I couldn't reproduce the issue with single disk without RAID.
> >
> > Could you verify if the following patch fixes your issue?
Yes, the patch should address this kind of issue, not related
with RAID specially, and the latest version can be found in the
following link:
https://marc.info/?l=linux-block&m=150579298505484&w=2
--
Ming
next prev parent reply other threads:[~2017-09-20 22:20 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-22 11:45 I/O hangs after resuming from suspend-to-ram Oleksandr Natalenko
2017-08-26 10:37 ` Oleksandr Natalenko
2017-08-26 10:48 ` Oleksandr Natalenko
2017-08-26 11:19 ` Martin Steigerwald
2017-08-26 17:17 ` Wols Lists
2017-08-26 19:33 ` Martin Steigerwald
2017-08-26 13:32 ` Oleksandr Natalenko
2017-08-27 6:02 ` Ming Lei
2017-08-27 7:43 ` Oleksandr Natalenko
2017-08-28 12:58 ` Ming Lei
2017-08-28 13:10 ` Martin Steigerwald
2017-08-28 13:32 ` Ming Lei
2017-09-20 17:25 ` Martin Steigerwald
2017-09-20 22:17 ` Ming Lei
2017-09-24 17:33 ` Martin Steigerwald
2017-09-25 2:59 ` Ming Lei
2017-09-25 14:13 ` Martin Steigerwald
2017-09-20 22:20 ` Ming Lei [this message]
2017-09-21 7:30 ` Martin Steigerwald
2017-09-21 7:33 ` Martin Steigerwald
2017-08-28 18:22 ` Oleksandr Natalenko
2017-08-29 0:24 ` Ming Lei
2017-08-29 15:52 ` Oleksandr Natalenko
2017-08-30 2:15 ` Ming Lei
2017-08-30 5:17 ` Ming Lei
2017-08-30 6:15 ` oleksandr
2017-08-30 8:06 ` Ming Lei
2017-08-30 10:58 ` oleksandr
2017-08-30 14:37 ` Ming Lei
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170920222011.GB5105@ming.t460p \
--to=ming.lei@redhat.com \
--cc=axboe@kernel.dk \
--cc=hch@lst.de \
--cc=linux-block@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-raid@vger.kernel.org \
--cc=martin@lichtvoll.de \
--cc=oleksandr@natalenko.name \
--cc=shli@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).