linux-raid.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Yufen Yu <yuyufen@huawei.com>, NeilBrown <neilb@suse.de>,
	Song Liu <songliubraving@fb.com>, Sasha Levin <sashal@kernel.org>,
	linux-raid@vger.kernel.org
Subject: [PATCH AUTOSEL 4.19 104/128] md/raid1: fail run raid1 array when active disk less than one
Date: Sun, 22 Sep 2019 14:53:54 -0400	[thread overview]
Message-ID: <20190922185418.2158-104-sashal@kernel.org> (raw)
In-Reply-To: <20190922185418.2158-1-sashal@kernel.org>

From: Yufen Yu <yuyufen@huawei.com>

[ Upstream commit 07f1a6850c5d5a65c917c3165692b5179ac4cb6b ]

When run test case:
  mdadm -CR /dev/md1 -l 1 -n 4 /dev/sd[a-d] --assume-clean --bitmap=internal
  mdadm -S /dev/md1
  mdadm -A /dev/md1 /dev/sd[b-c] --run --force

  mdadm --zero /dev/sda
  mdadm /dev/md1 -a /dev/sda

  echo offline > /sys/block/sdc/device/state
  echo offline > /sys/block/sdb/device/state
  sleep 5
  mdadm -S /dev/md1

  echo running > /sys/block/sdb/device/state
  echo running > /sys/block/sdc/device/state
  mdadm -A /dev/md1 /dev/sd[a-c] --run --force

mdadm run fail with kernel message as follow:
[  172.986064] md: kicking non-fresh sdb from array!
[  173.004210] md: kicking non-fresh sdc from array!
[  173.022383] md/raid1:md1: active with 0 out of 4 mirrors
[  173.022406] md1: failed to create bitmap (-5)

In fact, when active disk in raid1 array less than one, we
need to return fail in raid1_run().

Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/raid1.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index 54010675df9a5..6929d110d8048 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -3105,6 +3105,13 @@ static int raid1_run(struct mddev *mddev)
 		    !test_bit(In_sync, &conf->mirrors[i].rdev->flags) ||
 		    test_bit(Faulty, &conf->mirrors[i].rdev->flags))
 			mddev->degraded++;
+	/*
+	 * RAID1 needs at least one disk in active
+	 */
+	if (conf->raid_disks - mddev->degraded < 1) {
+		ret = -EINVAL;
+		goto abort;
+	}
 
 	if (conf->raid_disks - mddev->degraded == 1)
 		mddev->recovery_cp = MaxSector;
@@ -3138,8 +3145,12 @@ static int raid1_run(struct mddev *mddev)
 	ret =  md_integrity_register(mddev);
 	if (ret) {
 		md_unregister_thread(&mddev->thread);
-		raid1_free(mddev, conf);
+		goto abort;
 	}
+	return 0;
+
+abort:
+	raid1_free(mddev, conf);
 	return ret;
 }
 
-- 
2.20.1

  parent reply	other threads:[~2019-09-22 18:53 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20190922185418.2158-1-sashal@kernel.org>
2019-09-22 18:52 ` [PATCH AUTOSEL 4.19 031/128] md/raid1: end bio when the device faulty Sasha Levin
2019-09-22 18:52 ` [PATCH AUTOSEL 4.19 032/128] md: don't call spare_active in md_reap_sync_thread if all member devices can't work Sasha Levin
2019-09-22 18:52 ` [PATCH AUTOSEL 4.19 033/128] md: don't set In_sync if array is frozen Sasha Levin
2019-09-22 18:53 ` Sasha Levin [this message]
2019-09-22 18:54 ` [PATCH AUTOSEL 4.19 114/128] raid5: don't set STRIPE_HANDLE to stripe which is in batch list Sasha Levin
2019-09-22 18:54 ` [PATCH AUTOSEL 4.19 119/128] raid5: don't increment read_errors on EILSEQ return Sasha Levin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190922185418.2158-104-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-raid@vger.kernel.org \
    --cc=neilb@suse.de \
    --cc=songliubraving@fb.com \
    --cc=stable@vger.kernel.org \
    --cc=yuyufen@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).