Re: how do i bring this disk back into the fold?

[David T-G <davidtg-robot@justpickone.org>]

Hi again, all --

...and then David T-G home said...
% 
...
%   diskfarm:~ # cat /proc/mdstat 
%   Personalities : [raid6] [raid5] [raid4] 
...
%   md0 : active raid5 sdc1[3] sdd1[4] sdb1[0]
%         11720265216 blocks super 1.2 level 5, 512k chunk, algorithm 2 [4/3] [U_UU]
% 
%   diskfarm:~ # mdadm --examine /dev/sd[bcde]1 | egrep '/dev|Name|Role|State|Checksum|Events|UUID'
%   /dev/sdb1:
...
%             State : clean
...
%            Events : 77944
%      Device Role : Active device 0
%      Array State : A.AA ('A' == active, '.' == missing, 'R' == replacing)
%   /dev/sdc1:
...
%             State : clean
...
%            Events : 77944
%      Device Role : Active device 2
%      Array State : A.AA ('A' == active, '.' == missing, 'R' == replacing)
%   /dev/sdd1:
...
%             State : clean
...
%            Events : 77944
%      Device Role : Active device 3
%      Array State : A.AA ('A' == active, '.' == missing, 'R' == replacing)
%   /dev/sde1:
...
%             State : active
...
%            Events : 60360
%      Device Role : Active device 1
%      Array State : AAAA ('A' == active, '.' == missing, 'R' == replacing)
% 
...
% Before I go too crazy ...  What do I need to do to bring sde1 back into
% the RAID volume, either to catch up the missing 17k events (probably
% preferred) or just to rebuild it?
[snip]

Any advice?


Thanks again & HANW

:-D
-- 
David T-G
See http://justpickone.org/davidtg/email/
See http://justpickone.org/davidtg/tofu.txt