[PATCH 1/5] tests: remove raid0 tests for 0.90 metadata version

[Sudhakar Panneerselvam <sudhakar.panneerselvam@oracle.com>]

Some of the test cases fail because raid0 creation fails with the error,
"0.90 metadata does not support layouts for RAID0" added by commit,
329dfc28debb. Removing the 0.90 test to make these test cases to work.

removed 04r0update test completely as it is specific to raid0 for 0.9
version.

'04update-metadata' and '03r0assem' still fails at a different place after
this change which will be fixed in an upcoming commit.

Signed-off-by: Sudhakar Panneerselvam <sudhakar.panneerselvam@oracle.com>
---
 tests/00raid0           | 11 --------
 tests/00readonly        |  4 +++
 tests/03r0assem         | 72 -------------------------------------------------
 tests/04r0update        | 20 --------------
 tests/04update-metadata |  2 +-
 5 files changed, 5 insertions(+), 104 deletions(-)
 delete mode 100644 tests/04r0update

diff --git a/tests/00raid0 b/tests/00raid0
index 8bc18985f91a..e0b6e325b4c9 100644
--- a/tests/00raid0
+++ b/tests/00raid0
@@ -6,12 +6,6 @@ check raid0
 testdev $md0 3 $mdsize2_l 512
 mdadm -S $md0
 
-# now with version-0.90 superblock
-mdadm -CR $md0 -e0.90 -l0 -n4 $dev0 $dev1 $dev2 $dev3
-check raid0
-testdev $md0 4 $mdsize0 512
-mdadm -S $md0
-
 # now with no superblock
 mdadm -B $md0 -l0 -n5 $dev0 $dev1 $dev2 $dev3 $dev4
 check raid0
@@ -22,11 +16,6 @@ mdadm -S $md0
 # now same again with different chunk size
 for chunk in 4 32 256
 do
-  mdadm -CR $md0 -e0.90 -l raid0 --chunk $chunk -n3 $dev0 $dev1 $dev2
-  check raid0
-  testdev $md0 3 $mdsize0 $chunk
-  mdadm -S $md0
-
   # now with version-1 superblock
   mdadm -CR $md0 -e1.0 -l0 -c $chunk -n4 $dev0 $dev1 $dev2 $dev3
   check raid0
diff --git a/tests/00readonly b/tests/00readonly
index 28b0fa13f815..39202487f614 100644
--- a/tests/00readonly
+++ b/tests/00readonly
@@ -4,6 +4,10 @@ for metadata in 0.9 1.0 1.1 1.2
 do
 	for level in linear raid0 raid1 raid4 raid5 raid6 raid10
 	do
+		if [[ $metadata == "0.9" && $level == "raid0" ]];
+		then
+			continue
+		fi
 		mdadm -CR $md0 -l $level -n 4 --metadata=$metadata \
 			$dev1 $dev2 $dev3 $dev4 --assume-clean
 		check nosync
diff --git a/tests/03r0assem b/tests/03r0assem
index 6744e3221062..9df7ba6a7613 100644
--- a/tests/03r0assem
+++ b/tests/03r0assem
@@ -63,75 +63,3 @@ echo "  metadata=0.90 devices=$dev0,$dev1,$dev2" >> $conf
 mdadm --assemble --scan --config=$conf $md2
 $tst
 mdadm -S $md2
-
-
-### Now for version 0...
-
-mdadm --zero-superblock $dev0 $dev1 $dev2
-mdadm -CR $md2 -l0 --metadata=0.90 -n3 $dev0 $dev1 $dev2
-check raid0
-tst="testdev $md2 3 $mdsize0 512"
-$tst
-
-uuid=`mdadm -Db $md2 | sed 's/.*UUID=//'`
-mdadm -S $md2
-
-mdadm -A $md2 $dev0 $dev1 $dev2
-$tst
-mdadm -S $md2
-
-mdadm -A $md2 -u $uuid $devlist
-$tst
-mdadm -S $md2
-
-mdadm --assemble $md2 --super-minor=2 $devlist #
-$tst
-mdadm -S $md2
-
-conf=$targetdir/mdadm.conf
-{
-  echo DEVICE $devlist
-  echo array $md2 UUID=$uuid
-} > $conf
-
-mdadm -As -c $conf $md2
-$tst
-mdadm -S $md2
-
-{
-  echo DEVICE $devlist
-  echo array $md2 super-minor=2
-} > $conf
-
-mdadm -As -c $conf $md2
-$tst
-mdadm -S $md2
-
-
-{
-  echo DEVICE $devlist
-  echo array $md2 devices=$dev0,$dev1,$dev2
-} > $conf
-
-mdadm -As -c $conf $md2
-$tst
-
-echo "DEVICE $devlist" > $conf
-mdadm -Db $md2 >> $conf
-mdadm -S $md2
-
-mdadm --assemble --scan --config=$conf $md2
-$tst
-mdadm -S $md2
-
-echo "  metadata=1 devices=$dev0,$dev1,$dev2" >> $conf
-mdadm --assemble --scan --config=$conf $md2
-$tst
-mdadm -S $md2
-
-# Now use incremental assembly.
-mdadm -I --config=$conf $dev0
-mdadm -I --config=$conf $dev1
-mdadm -I --config=$conf $dev2
-$tst
-mdadm -S $md2
diff --git a/tests/04r0update b/tests/04r0update
deleted file mode 100644
index 73ee3b9fed91..000000000000
--- a/tests/04r0update
+++ /dev/null
@@ -1,20 +0,0 @@
-
-# create a raid0, re-assemble with a different super-minor
-mdadm -CR -e 0.90 $md0 -l0 -n3 $dev0 $dev1 $dev2
-testdev $md0 3 $mdsize0 512
-minor1=`mdadm -E $dev0 | sed -n -e 's/.*Preferred Minor : //p'`
-mdadm -S /dev/md0
-
-mdadm -A $md1 $dev0 $dev1 $dev2
-minor2=`mdadm -E $dev0 | sed -n -e 's/.*Preferred Minor : //p'`
-mdadm -S /dev/md1
-
-mdadm -A $md1 --update=super-minor $dev0 $dev1 $dev2
-minor3=`mdadm -E $dev0 | sed -n -e 's/.*Preferred Minor : //p'`
-mdadm -S /dev/md1
-
-case "$minor1 $minor2 $minor3" in
-  "0 0 1" ) ;;
-  * ) echo >&2 "ERROR minors should be '0 0 1' but are '$minor1 $minor2 $minor3'"
-      exit 1
-esac
diff --git a/tests/04update-metadata b/tests/04update-metadata
index 232fc1ffff4b..08c14af7ed29 100644
--- a/tests/04update-metadata
+++ b/tests/04update-metadata
@@ -8,7 +8,7 @@ set -xe
 
 dlist="$dev0 $dev1 $dev2 $dev3"
 
-for ls in raid0/4 linear/4 raid1/1 raid5/3 raid6/2
+for ls in linear/4 raid1/1 raid5/3 raid6/2
 do
   s=${ls#*/} l=${ls%/*}
   mdadm -CR --assume-clean -e 0.90 $md0 --level $l -n 4 -c 64 $dlist
-- 
1.8.3.1