From: Christoph Hellwig <hch@lst.de>
To: Jens Axboe <axboe@kernel.dk>
Cc: Coly Li <colyli@suse.de>, Mike Snitzer <snitzer@redhat.com>,
Song Liu <song@kernel.org>,
"Martin K. Petersen" <martin.petersen@oracle.com>,
Josef Bacik <josef@toxicpanda.com>,
David Sterba <dsterba@suse.com>,
Phillip Lougher <phillip@squashfs.org.uk>,
linux-block@vger.kernel.org, dm-devel@redhat.com,
linux-kernel@vger.kernel.org, linux-bcache@vger.kernel.org,
linux-raid@vger.kernel.org, target-devel@vger.kernel.org,
linux-btrfs@vger.kernel.org
Subject: [PATCH 1/5] btrfs: simplify ->flush_bio handling
Date: Tue, 8 Mar 2022 07:15:47 +0100 [thread overview]
Message-ID: <20220308061551.737853-2-hch@lst.de> (raw)
In-Reply-To: <20220308061551.737853-1-hch@lst.de>
Use and embedded bios that is initialized when used instead of
bio_kmalloc plus bio_reset.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
---
fs/btrfs/disk-io.c | 8 +++++---
fs/btrfs/volumes.c | 11 -----------
fs/btrfs/volumes.h | 4 ++--
3 files changed, 7 insertions(+), 16 deletions(-)
diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c
index 505ba21230b1f..7d4229c769ac6 100644
--- a/fs/btrfs/disk-io.c
+++ b/fs/btrfs/disk-io.c
@@ -4127,6 +4127,7 @@ static int wait_dev_supers(struct btrfs_device *device, int max_mirrors)
*/
static void btrfs_end_empty_barrier(struct bio *bio)
{
+ bio_uninit(bio);
complete(bio->bi_private);
}
@@ -4136,7 +4137,7 @@ static void btrfs_end_empty_barrier(struct bio *bio)
*/
static void write_dev_flush(struct btrfs_device *device)
{
- struct bio *bio = device->flush_bio;
+ struct bio *bio = &device->flush_bio;
#ifndef CONFIG_BTRFS_FS_CHECK_INTEGRITY
/*
@@ -4154,7 +4155,8 @@ static void write_dev_flush(struct btrfs_device *device)
return;
#endif
- bio_reset(bio, device->bdev, REQ_OP_WRITE | REQ_SYNC | REQ_PREFLUSH);
+ bio_init(bio, device->bdev, NULL, 0,
+ REQ_OP_WRITE | REQ_SYNC | REQ_PREFLUSH);
bio->bi_end_io = btrfs_end_empty_barrier;
init_completion(&device->flush_wait);
bio->bi_private = &device->flush_wait;
@@ -4168,7 +4170,7 @@ static void write_dev_flush(struct btrfs_device *device)
*/
static blk_status_t wait_dev_flush(struct btrfs_device *device)
{
- struct bio *bio = device->flush_bio;
+ struct bio *bio = &device->flush_bio;
if (!test_bit(BTRFS_DEV_STATE_FLUSH_SENT, &device->dev_state))
return BLK_STS_OK;
diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c
index b07d382d53a86..7015b3096f724 100644
--- a/fs/btrfs/volumes.c
+++ b/fs/btrfs/volumes.c
@@ -405,7 +405,6 @@ void btrfs_free_device(struct btrfs_device *device)
WARN_ON(!list_empty(&device->post_commit_list));
rcu_string_free(device->name);
extent_io_tree_release(&device->alloc_state);
- bio_put(device->flush_bio);
btrfs_destroy_dev_zone_info(device);
kfree(device);
}
@@ -6962,16 +6961,6 @@ struct btrfs_device *btrfs_alloc_device(struct btrfs_fs_info *fs_info,
if (!dev)
return ERR_PTR(-ENOMEM);
- /*
- * Preallocate a bio that's always going to be used for flushing device
- * barriers and matches the device lifespan
- */
- dev->flush_bio = bio_kmalloc(GFP_KERNEL, 0);
- if (!dev->flush_bio) {
- kfree(dev);
- return ERR_PTR(-ENOMEM);
- }
-
INIT_LIST_HEAD(&dev->dev_list);
INIT_LIST_HEAD(&dev->dev_alloc_list);
INIT_LIST_HEAD(&dev->post_commit_list);
diff --git a/fs/btrfs/volumes.h b/fs/btrfs/volumes.h
index 005c9e2a491a1..dbd6cc5e5cd3b 100644
--- a/fs/btrfs/volumes.h
+++ b/fs/btrfs/volumes.h
@@ -116,8 +116,8 @@ struct btrfs_device {
/* bytes used on the current transaction */
u64 commit_bytes_used;
- /* for sending down flush barriers */
- struct bio *flush_bio;
+ /* Bio used for flushing device barriers */
+ struct bio flush_bio;
struct completion flush_wait;
/* per-device scrub information */
--
2.30.2
next prev parent reply other threads:[~2022-03-08 6:16 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-03-08 6:15 cleanup bio_kmalloc v2 Christoph Hellwig
2022-03-08 6:15 ` Christoph Hellwig [this message]
2022-03-08 22:07 ` [PATCH 1/5] btrfs: simplify ->flush_bio handling Chaitanya Kulkarni
2022-03-08 6:15 ` [PATCH 2/5] squashfs: always use bio_kmalloc in squashfs_bio_read Christoph Hellwig
2022-03-08 6:15 ` [PATCH 3/5] target/pscsi: remove pscsi_get_bio Christoph Hellwig
2022-03-08 22:08 ` Chaitanya Kulkarni
2022-03-08 6:15 ` [PATCH 4/5] block: turn bio_kmalloc into a simple kmalloc wrapper Christoph Hellwig
2022-03-09 3:06 ` Martin K. Petersen
[not found] ` <CGME20220331211804eucas1p28da21f2dfd57aa490abffb8f87417f42@eucas1p2.samsung.com>
2022-03-31 21:18 ` Marek Szyprowski
2022-03-31 21:22 ` Jens Axboe
2022-04-01 4:57 ` Christoph Hellwig
2022-03-08 6:15 ` [PATCH 5/5] pktcdvd: stop using bio_reset Christoph Hellwig
2022-03-08 22:10 ` Chaitanya Kulkarni
2022-03-30 14:29 ` cleanup bio_kmalloc v2 Christoph Hellwig
2022-03-30 14:37 ` Jens Axboe
2022-03-30 14:49 ` Jens Axboe
2022-03-31 16:34 ` Qian Cai
2022-03-31 16:40 ` Christoph Hellwig
2022-03-31 16:48 ` Jens Axboe
-- strict thread matches above, loose matches on Subject: below --
2022-04-06 6:12 cleanup bio_kmalloc v3 Christoph Hellwig
2022-04-06 6:12 ` [PATCH 1/5] btrfs: simplify ->flush_bio handling Christoph Hellwig
2022-04-06 16:23 ` Chaitanya Kulkarni
2022-03-01 8:45 cleanup bio_kmalloc Christoph Hellwig
2022-03-01 8:45 ` [PATCH 1/5] btrfs: simplify ->flush_bio handling Christoph Hellwig
2022-03-01 14:22 ` David Sterba
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220308061551.737853-2-hch@lst.de \
--to=hch@lst.de \
--cc=axboe@kernel.dk \
--cc=colyli@suse.de \
--cc=dm-devel@redhat.com \
--cc=dsterba@suse.com \
--cc=josef@toxicpanda.com \
--cc=linux-bcache@vger.kernel.org \
--cc=linux-block@vger.kernel.org \
--cc=linux-btrfs@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-raid@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=phillip@squashfs.org.uk \
--cc=snitzer@redhat.com \
--cc=song@kernel.org \
--cc=target-devel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).