linux-raid.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Yu Kuai <yukuai1@huaweicloud.com>
To: xni@redhat.com, song@kernel.org
Cc: linux-raid@vger.kernel.org, linux-kernel@vger.kernel.org,
	yukuai3@huawei.com, yukuai1@huaweicloud.com, yi.zhang@huawei.com,
	yangerkun@huawei.com
Subject: [PATCH -next 4/8] md/raid1: switch to use md_account_bio() for io accounting
Date: Tue, 20 Jun 2023 04:48:22 +0800	[thread overview]
Message-ID: <20230619204826.755559-5-yukuai1@huaweicloud.com> (raw)
In-Reply-To: <20230619204826.755559-1-yukuai1@huaweicloud.com>

From: Yu Kuai <yukuai3@huawei.com>

Two problems can be fixed this way:

1) 'active_io' will represent inflight io instead of io that is
dispatching.

2) If io accounting is enabled or disabled while io is still inflight,
bio_start_io_acct() and bio_end_io_acct() is not balanced and io
inflight counter will be leaked.

Signed-off-by: Yu Kuai <yukuai3@huawei.com>
---
 drivers/md/raid1.c | 14 ++++++--------
 drivers/md/raid1.h |  1 -
 2 files changed, 6 insertions(+), 9 deletions(-)

diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index dd25832eb045..06fa1580501f 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -304,8 +304,6 @@ static void call_bio_endio(struct r1bio *r1_bio)
 	if (!test_bit(R1BIO_Uptodate, &r1_bio->state))
 		bio->bi_status = BLK_STS_IOERR;
 
-	if (blk_queue_io_stat(bio->bi_bdev->bd_disk->queue))
-		bio_end_io_acct(bio, r1_bio->start_time);
 	bio_endio(bio);
 }
 
@@ -1303,10 +1301,10 @@ static void raid1_read_request(struct mddev *mddev, struct bio *bio,
 	}
 
 	r1_bio->read_disk = rdisk;
-
-	if (!r1bio_existed && blk_queue_io_stat(bio->bi_bdev->bd_disk->queue))
-		r1_bio->start_time = bio_start_io_acct(bio);
-
+	if (!r1bio_existed) {
+		md_account_bio(mddev, &bio);
+		r1_bio->master_bio = bio;
+	}
 	read_bio = bio_alloc_clone(mirror->rdev->bdev, bio, gfp,
 				   &mddev->bio_set);
 
@@ -1500,8 +1498,8 @@ static void raid1_write_request(struct mddev *mddev, struct bio *bio,
 		r1_bio->sectors = max_sectors;
 	}
 
-	if (blk_queue_io_stat(bio->bi_bdev->bd_disk->queue))
-		r1_bio->start_time = bio_start_io_acct(bio);
+	md_account_bio(mddev, &bio);
+	r1_bio->master_bio = bio;
 	atomic_set(&r1_bio->remaining, 1);
 	atomic_set(&r1_bio->behind_remaining, 0);
 
diff --git a/drivers/md/raid1.h b/drivers/md/raid1.h
index 468f189da7a0..14d4211a123a 100644
--- a/drivers/md/raid1.h
+++ b/drivers/md/raid1.h
@@ -157,7 +157,6 @@ struct r1bio {
 	sector_t		sector;
 	int			sectors;
 	unsigned long		state;
-	unsigned long		start_time;
 	struct mddev		*mddev;
 	/*
 	 * original bio going to /dev/mdx
-- 
2.39.2


  parent reply	other threads:[~2023-06-19 12:50 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-06-19 20:48 [PATCH -next 0/8] md: fix and refactor io accounting and 'active_io' Yu Kuai
2023-06-19 20:48 ` [PATCH -next 1/8] md: move initialization and destruction of 'io_acct_set' to md.c Yu Kuai
2023-06-20  8:35   ` Xiao Ni
2023-06-21  2:35     ` Yu Kuai
2023-06-19 20:48 ` [PATCH -next 2/8] md: also clone new io if io accounting is disabled Yu Kuai
2023-06-20  8:48   ` Xiao Ni
2023-06-19 20:48 ` [PATCH -next 3/8] raid5: fix missing io accounting in raid5_align_endio() Yu Kuai
2023-06-20  8:52   ` Xiao Ni
2023-06-20  9:57   ` Paul Menzel
2023-06-21  3:22     ` Yu Kuai
2023-06-19 20:48 ` Yu Kuai [this message]
2023-06-20  9:07   ` [PATCH -next 4/8] md/raid1: switch to use md_account_bio() for io accounting Xiao Ni
2023-06-20 13:38     ` Yu Kuai
2023-06-19 20:48 ` [PATCH -next 5/8] md/raid10: " Yu Kuai
2023-06-20  9:10   ` Xiao Ni
2023-06-19 20:48 ` [PATCH -next 6/8] md/md-multipath: enable " Yu Kuai
2023-06-20  9:11   ` Xiao Ni
2023-06-19 20:48 ` [PATCH -next 7/8] md/md-linear: " Yu Kuai
2023-06-20  9:12   ` Xiao Ni
2023-06-19 20:48 ` [PATCH -next 8/8] md/md-faulty: " Yu Kuai
2023-06-20  9:13   ` Xiao Ni
2023-06-20 17:45 ` [PATCH -next 0/8] md: fix and refactor io accounting and 'active_io' Song Liu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230619204826.755559-5-yukuai1@huaweicloud.com \
    --to=yukuai1@huaweicloud.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-raid@vger.kernel.org \
    --cc=song@kernel.org \
    --cc=xni@redhat.com \
    --cc=yangerkun@huawei.com \
    --cc=yi.zhang@huawei.com \
    --cc=yukuai3@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).