Linux RAID subsystem development
 help / color / mirror / Atom feed
From: Yu Kuai <yukuai@fnnas.com>
To: linux-raid@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, Li Nan <linan122@huawei.com>,
	Yu Kuai <yukuai@fnnas.com>, Cheng Cheng <chencheng@fnnas.com>
Subject: [PATCH] md/md-llbitmap: track bitmap sync_size explicitly
Date: Sun, 19 Apr 2026 11:09:26 +0800	[thread overview]
Message-ID: <20260419030942.824195-4-yukuai@fnnas.com> (raw)
In-Reply-To: <20260419030942.824195-1-yukuai@fnnas.com>

Track llbitmap's own sync_size instead of always using
mddev->resync_max_sectors directly.

This is the minimal bookkeeping needed before llbitmap can track old
and new reshape geometry independently.

Signed-off-by: Yu Kuai <yukuai@fnnas.com>
---
 drivers/md/md-llbitmap.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

diff --git a/drivers/md/md-llbitmap.c b/drivers/md/md-llbitmap.c
index 62b8f3efa9f5..547b1317df43 100644
--- a/drivers/md/md-llbitmap.c
+++ b/drivers/md/md-llbitmap.c
@@ -267,6 +267,8 @@ struct llbitmap {
 	unsigned long chunksize;
 	/* total number of chunks */
 	unsigned long chunks;
+	/* total number of sectors tracked by current bitmap geometry */
+	sector_t sync_size;
 	unsigned long last_end_sync;
 	/*
 	 * time in seconds that dirty bits will be cleared if the page is not
@@ -791,6 +793,7 @@ static int llbitmap_init(struct llbitmap *llbitmap)
 	llbitmap->chunkshift = ffz(~chunksize);
 	llbitmap->chunksize = chunksize;
 	llbitmap->chunks = chunks;
+	llbitmap->sync_size = blocks;
 	mddev->bitmap_info.daemon_sleep = DEFAULT_DAEMON_SLEEP;
 
 	ret = llbitmap_cache_pages(llbitmap);
@@ -811,6 +814,7 @@ static int llbitmap_read_sb(struct llbitmap *llbitmap)
 	unsigned long daemon_sleep;
 	unsigned long chunksize;
 	unsigned long events;
+	sector_t sync_size;
 	struct page *sb_page;
 	bitmap_super_t *sb;
 	int ret = -EINVAL;
@@ -860,6 +864,9 @@ static int llbitmap_read_sb(struct llbitmap *llbitmap)
 		goto out_put_page;
 	}
 
+	sync_size = le64_to_cpu(sb->sync_size);
+	if (!sync_size)
+		sync_size = mddev->resync_max_sectors;
 	chunksize = le32_to_cpu(sb->chunksize);
 	if (!is_power_of_2(chunksize)) {
 		pr_err("md/llbitmap: %s: chunksize not a power of 2",
@@ -895,8 +902,9 @@ static int llbitmap_read_sb(struct llbitmap *llbitmap)
 
 	llbitmap->barrier_idle = DEFAULT_BARRIER_IDLE;
 	llbitmap->chunksize = chunksize;
-	llbitmap->chunks = DIV_ROUND_UP_SECTOR_T(mddev->resync_max_sectors, chunksize);
+	llbitmap->chunks = DIV_ROUND_UP_SECTOR_T(sync_size, chunksize);
 	llbitmap->chunkshift = ffz(~chunksize);
+	llbitmap->sync_size = sync_size;
 	ret = llbitmap_cache_pages(llbitmap);
 
 out_put_page:
@@ -1026,6 +1034,7 @@ static int llbitmap_resize(struct mddev *mddev, sector_t blocks, int chunksize)
 	llbitmap->chunkshift = ffz(~chunksize);
 	llbitmap->chunksize = chunksize;
 	llbitmap->chunks = chunks;
+	llbitmap->sync_size = blocks;
 
 	return 0;
 }
@@ -1384,7 +1393,7 @@ static void llbitmap_update_sb(void *data)
 	sb->events = cpu_to_le64(mddev->events);
 	sb->state = cpu_to_le32(llbitmap->flags);
 	sb->chunksize = cpu_to_le32(llbitmap->chunksize);
-	sb->sync_size = cpu_to_le64(mddev->resync_max_sectors);
+	sb->sync_size = cpu_to_le64(llbitmap->sync_size);
 	sb->events_cleared = cpu_to_le64(llbitmap->events_cleared);
 	sb->sectors_reserved = cpu_to_le32(mddev->bitmap_info.space);
 	sb->daemon_sleep = cpu_to_le32(mddev->bitmap_info.daemon_sleep);
@@ -1402,6 +1411,7 @@ static int llbitmap_get_stats(void *data, struct md_bitmap_stats *stats)
 	stats->missing_pages = 0;
 	stats->pages = llbitmap->nr_pages;
 	stats->file_pages = llbitmap->nr_pages;
+	stats->sync_size = llbitmap->sync_size;
 
 	stats->behind_writes = atomic_read(&llbitmap->behind_writes);
 	stats->behind_wait = wq_has_sleeper(&llbitmap->behind_wait);
-- 
2.51.0


  parent reply	other threads:[~2026-04-19  3:10 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-04-19  3:09 [PATCH 00/19] md: support llbitmap reshape for raid10 and raid5 Yu Kuai
2026-04-19  3:09 ` [PATCH] md: add exact bitmap mapping and reshape hooks Yu Kuai
2026-04-19  3:09 ` [PATCH] md: add helper to split bios at reshape offset Yu Kuai
2026-04-19  3:09 ` Yu Kuai [this message]
2026-04-19  3:09 ` [PATCH] md/md-llbitmap: allocate page controls independently Yu Kuai
2026-04-19  3:09 ` [PATCH] md/md-llbitmap: grow the page cache in place for reshape Yu Kuai
2026-04-19  3:09 ` [PATCH] md/md-llbitmap: track target reshape geometry fields Yu Kuai
2026-04-19  3:09 ` [PATCH] md/md-llbitmap: finish reshape geometry Yu Kuai
2026-04-19  3:09 ` [PATCH] md/md-llbitmap: refuse reshape while llbitmap still needs sync Yu Kuai
2026-04-19  3:09 ` [PATCH] md/md-llbitmap: add reshape range mapping helpers Yu Kuai
2026-04-19  3:09 ` [PATCH] md/md-llbitmap: don't skip reshape ranges from bitmap state Yu Kuai
2026-04-19  3:09 ` [PATCH] md/md-llbitmap: remap checkpointed bits as reshape progresses Yu Kuai
2026-04-19  3:09 ` [PATCH] md/md-llbitmap: clamp state-machine walks to tracked bits Yu Kuai
2026-04-19  3:09 ` [PATCH] md/raid10: reject llbitmap chunk shrink during reshape Yu Kuai
2026-04-19  3:09 ` [PATCH] md/raid10: wire llbitmap reshape lifecycle Yu Kuai
2026-04-30  2:37   ` kernel test robot
2026-04-19  3:09 ` [PATCH] md/raid10: split reshape bios before bitmap accounting Yu Kuai
2026-04-19  3:09 ` [PATCH] md/raid5: add exact old and new llbitmap mapping helpers Yu Kuai
2026-05-01 18:51   ` kernel test robot
2026-04-19  3:09 ` [PATCH] md/raid5: reject llbitmap chunk shrink during reshape Yu Kuai
2026-04-19  3:09 ` [PATCH] md/raid5: wire llbitmap reshape lifecycle Yu Kuai
2026-04-19  3:09 ` [PATCH] md/raid5: split reshape bios before bitmap accounting Yu Kuai
2026-04-30  0:59   ` kernel test robot
2026-04-30  4:07   ` kernel test robot
2026-04-30 19:48   ` kernel test robot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260419030942.824195-4-yukuai@fnnas.com \
    --to=yukuai@fnnas.com \
    --cc=chencheng@fnnas.com \
    --cc=linan122@huawei.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-raid@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox