From: Sajal Gupta <sajal2005gupta@gmail.com>
To: linux-raid@vger.kernel.org, song@kernel.org
Cc: yukuai3@huawei.com, tomasz.majchrzak@intel.com,
linux-kernel@vger.kernel.org, error27@gmail.com,
skhan@linuxfoundation.org, me@brighamcampbell.com,
linux-kernel-mentees@lists.linux.dev,
Sajal Gupta <sajal2005gupta@gmail.com>
Subject: [PATCH] md/raid5-ppl: convert pending_flushes from atomic_t to refcount_t
Date: Mon, 22 Jun 2026 13:34:32 +0530 [thread overview]
Message-ID: <20260622080656.22786-1-sajal2005gupta@gmail.com> (raw)
The old atomic_t based counter allowed ppl_do_flush() to continue using io
after it could already have been freed by ppl_io_unit_finished(), leading
to a use-after-free.
Convert pending_flushes from atomic_t to refcount_t with a proper ownership
model. The creator holds a reference for the duration of ppl_do_flush(),
and each submitted flush bio holds a reference until its endio callback
runs. This makes the io lifetime explicit and removes the need for the
second loop in ppl_do_flush().
Fixes: 1532d9e87e8b ("raid5-ppl: PPL support for disks with write-back cache enabled")
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/all/ajJF2wKYWRk4GGCK@stanley.mountain/
Signed-off-by: Sajal Gupta <sajal2005gupta@gmail.com>
---
drivers/md/raid5-ppl.c | 17 ++++++-----------
1 file changed, 6 insertions(+), 11 deletions(-)
diff --git a/drivers/md/raid5-ppl.c b/drivers/md/raid5-ppl.c
index a70cbec12ed0..157a89edd9c8 100644
--- a/drivers/md/raid5-ppl.c
+++ b/drivers/md/raid5-ppl.c
@@ -145,7 +145,7 @@ struct ppl_io_unit {
struct list_head stripe_list; /* stripes added to the io_unit */
atomic_t pending_stripes; /* how many stripes not written to raid */
- atomic_t pending_flushes; /* how many disk flushes are in progress */
+ refcount_t pending_flushes; /* how many disk flushes are in progress */
bool submitted; /* true if write to log started */
@@ -249,7 +249,7 @@ static struct ppl_io_unit *ppl_new_iounit(struct ppl_log *log,
INIT_LIST_HEAD(&io->log_sibling);
INIT_LIST_HEAD(&io->stripe_list);
atomic_set(&io->pending_stripes, 0);
- atomic_set(&io->pending_flushes, 0);
+ refcount_set(&io->pending_flushes, 1);
bio_init(&io->bio, log->rdev->bdev, io->biovec, PPL_IO_INLINE_BVECS,
REQ_OP_WRITE | REQ_FUA);
@@ -599,7 +599,7 @@ static void ppl_flush_endio(struct bio *bio)
bio_put(bio);
- if (atomic_dec_and_test(&io->pending_flushes)) {
+ if (refcount_dec_and_test(&io->pending_flushes)) {
ppl_io_unit_finished(io);
md_wakeup_thread(conf->mddev->thread);
}
@@ -611,11 +611,8 @@ static void ppl_do_flush(struct ppl_io_unit *io)
struct ppl_conf *ppl_conf = log->ppl_conf;
struct r5conf *conf = ppl_conf->mddev->private;
int raid_disks = conf->raid_disks;
- int flushed_disks = 0;
int i;
- atomic_set(&io->pending_flushes, raid_disks);
-
for_each_set_bit(i, &log->disk_flush_bitmap, raid_disks) {
struct md_rdev *rdev;
struct block_device *bdev = NULL;
@@ -632,20 +629,18 @@ static void ppl_do_flush(struct ppl_io_unit *io)
GFP_NOIO, &ppl_conf->flush_bs);
bio->bi_private = io;
bio->bi_end_io = ppl_flush_endio;
+ refcount_inc(&io->pending_flushes);
pr_debug("%s: dev: %ps\n", __func__, bio->bi_bdev);
submit_bio(bio);
- flushed_disks++;
}
}
log->disk_flush_bitmap = 0;
- for (i = flushed_disks ; i < raid_disks; i++) {
- if (atomic_dec_and_test(&io->pending_flushes))
- ppl_io_unit_finished(io);
- }
+ if (refcount_dec_and_test(&io->pending_flushes))
+ ppl_io_unit_finished(io);
}
static inline bool ppl_no_io_unit_submitted(struct r5conf *conf,
--
2.54.0
next reply other threads:[~2026-06-22 8:07 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-22 8:04 Sajal Gupta [this message]
2026-06-22 8:42 ` [PATCH] md/raid5-ppl: convert pending_flushes from atomic_t to refcount_t Dan Carpenter
2026-06-22 8:43 ` Dan Carpenter
2026-06-22 10:28 ` Sajal Gupta
2026-06-22 10:57 ` Dan Carpenter
2026-06-22 11:28 ` Sajal Gupta
2026-06-22 11:38 ` Dan Carpenter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260622080656.22786-1-sajal2005gupta@gmail.com \
--to=sajal2005gupta@gmail.com \
--cc=error27@gmail.com \
--cc=linux-kernel-mentees@lists.linux.dev \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-raid@vger.kernel.org \
--cc=me@brighamcampbell.com \
--cc=skhan@linuxfoundation.org \
--cc=song@kernel.org \
--cc=tomasz.majchrzak@intel.com \
--cc=yukuai3@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox