From: Dag Nygren <dag@newtech.fi>
To: "Nuno Magalhães" <nunomagalhaes@eu.ipp.pt>
Cc: linux-raid@vger.kernel.org
Subject: Re: RAID newbie, 1 vs 5, chunk sizes
Date: Wed, 18 Jun 2014 13:19:46 +0300 [thread overview]
Message-ID: <2036850.atdiKx507N@eseries.newtech.fi> (raw)
In-Reply-To: <CADqA9ub=-=V_RMF+G2ZniQG06oDJ6KDhdPhDuPeufHFpgs4Mdw@mail.gmail.com>
On Monday 16 June 2014 13:36:44 Nuno Magalhães wrote:
> Hi,
>
> On Mon, Jun 16, 2014 at 3:23 AM, Phil Turmel <philip@turmel.org> wrote:
> > Before going any further, check the TLER/ERC support for these drives.
>
> Both Seagate ST1000DM0003 don't have that:
> Warning: device does not support SCT Error Recovery Control command
>
> The Toshiba DT01ACA100 seems to have, but disabled:
> SCT Error Recovery Control:
> Read: Disabled
> Write: Disabled
>
> I couldn't find any specs with specific details on this feature for
> the Toshiba, and i'm not sure if it's safe to issue smartctl -l
> scterc,70,70 on a drive thay may not support it. If it's disabled as
> an incentive to buy more expensive drives, will the drive just ignore
> this command or will it decide to roast?
>
> Are there any - recommended - consumer-grade drives out there that do
> support TLER? I was going for 1TB@7200, but that can change. I started
> disliking Seagate after a ST31000528AS died on me. They bought Maxtor
> a long time ago and recently bought Samsung's disk division. I've had
> no qualms with Toshiba. I'm not so sure on WD, they used to be less
> that good; and haven't tried Hitachi. What say you?
Just love my HGST 4 TB drives. The first ones that haven't
developed any pending/remapped sectors during the 9 months
they have been in 24/7 use. Previously tried different Seagates, with
constant problems (And yes - Had the SCT turned on). Also tested a WD red,
but saw similar symptoms developing and so degraded that to a storage
disk for my boy...
HGST was some 20€ more expensive and hard to get here but definitely
worth it.
YMMV
Dag
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2014-06-18 10:19 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-14 21:01 RAID newbie, 1 vs 5, chunk sizes Nuno Magalhães
2014-06-14 21:56 ` Stan Hoeppner
2014-06-15 11:50 ` Nuno Magalhães
[not found] ` <pmrj5x4rq3qbl6unnu7guho9.1402849407134@email.android.com>
2014-06-15 17:40 ` Nuno Magalhães
2014-06-16 2:23 ` Phil Turmel
2014-06-16 12:36 ` Nuno Magalhães
2014-06-16 13:19 ` Mark Knecht
2014-06-16 14:28 ` Phil Turmel
2014-06-16 16:14 ` Nuno Magalhães
2014-06-16 20:13 ` Phil Turmel
2014-06-16 21:02 ` Mark Knecht
2014-06-17 0:41 ` Nuno Magalhães
2014-06-17 0:47 ` Brad Campbell
2014-06-17 9:09 ` Nuno Magalhães
2014-06-17 19:50 ` Stan Hoeppner
2014-06-18 2:55 ` Brad Campbell
2014-06-18 7:33 ` Wilson, Jonathan
2014-06-18 10:19 ` Dag Nygren [this message]
2014-06-18 11:58 ` Mathias Burén
2014-06-18 12:16 ` Brad Campbell
2014-06-18 17:34 ` Roman Mamedov
2014-06-19 6:45 ` Wilson, Jonathan
2014-06-29 13:22 ` Nuno Magalhães
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2036850.atdiKx507N@eseries.newtech.fi \
--to=dag@newtech.fi \
--cc=linux-raid@vger.kernel.org \
--cc=nunomagalhaes@eu.ipp.pt \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox