From: dturner <dan@voiceweather.net>
To: linux-raid@vger.kernel.org
Subject: Help a Newbie on Linux-Raid 1
Date: Sat, 13 Dec 2008 15:43:55 -0800 (PST) [thread overview]
Message-ID: <20995732.post@talk.nabble.com> (raw)
I am rather new to linux and decided to set up a system using linux raid on
centos 5.2 Being new I find some howtos easy to follow and I used one in
setting up the raid. All looked fine when I finished and everything was was
in order showing working raid and then I did a stupid thing and stopped the
machine to make sure each drive could boot. Stopping the machine between
drive swaps. THis all worked well then I configured the machine and a few
days latter I noticed that the raid was showing degraded on both drives.
Now being a newbie I am in a bind. The machine is still running and after
spending many hours configuring it, I do not want to screw it up so I look
to someone with lots more knowledge than I for help.
Please help with full command lines to solve this issue and get the raid
rebuilt as I do not want to screw anything up. I have included the
information on the system below. If anything else is needed please let me
know.
Many thanks in advance guys.....
Dan
/var/log/dmesg
ata1.00: ATA-7: ST3250310AS, 4.AAA, max UDMA/133
ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
ata2.00: ATA-7: ST3250310AS, 4.AAA, max UDMA/133
ata2.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata2.00: configured for UDMA/133
Vendor: ATA Model: ST3250310AS Rev: 4.AA
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
sda: sda1 sda2
sd 0:0:0:0: Attached scsi disk sda
Vendor: ATA Model: ST3250310AS Rev: 4.AA
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: drive cache: write back
SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: drive cache: write back
sdb: sdb1 sdb2
sd 1:0:0:0: Attached scsi disk sdb
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.11.5-ioctl (2007-12-12) initialised:
dm-devel@redhat.com
md: Autodetecting RAID arrays.
md: autorun ...
md: considering sdb2 ...
md: adding sdb2 ...
md: sdb1 has different UUID to sdb2
md: adding sda2 ...
md: sda1 has different UUID to sdb2
md: created md1
md: bind<sda2>
md: bind<sdb2>
md: running: <sdb2><sda2>
md: kicking non-fresh sda2 from array!
md: unbind<sda2>
md: export_rdev(sda2)
raid1: raid set md1 active with 1 out of 2 mirrors
md: considering sdb1 ...
md: adding sdb1 ...
md: adding sda1 ...
md: created md0
md: bind<sda1>
md: bind<sdb1>
md: running: <sdb1><sda1>
md: kicking non-fresh sda1 from array!
md: unbind<sda1>
md: export_rdev(sda1)
raid1: raid set md0 active with 1 out of 2 mirrors
md: ... autorun DONE.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
# cat /proc/mdstat
Personalities : [raid1]
md0 : active raid1 sdb1[1]
104320 blocks [2/1] [_U]
md1 : active raid1 sdb2[1]
244091520 blocks [2/1] [_U]
unused devices: <none>
# /sbin/mdadm -D /dev/md1
/dev/md1:
Version : 00.90.03
Creation Time : Sat Nov 8 13:31:37 2008
Raid Level : raid1
Array Size : 244091520 (232.78 GiB 249.95 GB)
Used Dev Size : 244091520 (232.78 GiB 249.95 GB)
Raid Devices : 2
Total Devices : 1
Preferred Minor : 1
Persistence : Superblock is persistent
Update Time : Tue Dec 2 08:06:57 2008
State : clean, degraded
Active Devices : 1
Working Devices : 1
Failed Devices : 0
Spare Devices : 0
UUID : 86e86a3b:8e87f809:12ea81c3:2a8cb750
Events : 0.743680
Number Major Minor RaidDevice State
0 0 0 0 removed
1 8 18 1 active sync /dev/sdb2
# /sbin/mdadm -D /dev/md0
/dev/md0:
Version : 00.90.03
Creation Time : Sat Nov 8 13:33:46 2008
Raid Level : raid1
Array Size : 104320 (101.89 MiB 106.82 MB)
Used Dev Size : 104320 (101.89 MiB 106.82 MB)
Raid Devices : 2
Total Devices : 1
Preferred Minor : 0
Persistence : Superblock is persistent
Update Time : Mon Dec 1 10:26:34 2008
State : clean, degraded
Active Devices : 1
Working Devices : 1
Failed Devices : 0
Spare Devices : 0
UUID : de04b561:d5722aa5:39fbf8b1:b8b8884b
Events : 0.210
Number Major Minor RaidDevice State
0 0 0 0 removed
1 8 17 1 active sync /dev/sdb1
--
View this message in context: http://www.nabble.com/Help-a-Newbie-on-Linux-Raid-1-tp20995732p20995732.html
Sent from the linux-raid mailing list archive at Nabble.com.
next reply other threads:[~2008-12-13 23:43 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-12-13 23:43 dturner [this message]
2008-12-14 0:55 ` Help a Newbie on Linux-Raid 1 Justin Piszcz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20995732.post@talk.nabble.com \
--to=dan@voiceweather.net \
--cc=linux-raid@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).