linux-raid.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Oleksandr Natalenko <oleksandr@natalenko.name>
To: Ming Lei <ming.lei@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>, Christoph Hellwig <hch@lst.de>,
	linux-block@vger.kernel.org, linux-raid@vger.kernel.org,
	linux-kernel@vger.kernel.org, Shaohua Li <shli@kernel.org>
Subject: Re: I/O hangs after resuming from suspend-to-ram
Date: Tue, 29 Aug 2017 17:52:42 +0200	[thread overview]
Message-ID: <2329566.kid2YYBOAQ@natalenko.name> (raw)
In-Reply-To: <20170829002425.GA28904@ming.t460p>

Hello.

Re-tested with v4.13-rc7 + proposed patch and got the same result.

Let me know if any additional testing is needed.

===
[   82.638148] INFO: task md0_raid10:193 blocked for more than 20 seconds.
[   82.642804]       Not tainted 4.13.0-pf1 #1
[   82.646998] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables 
this message.
[   82.649007] md0_raid10      D    0   193      2 0x00000000
[   82.650799] Call Trace:
[   82.652118]  __schedule+0x239/0x890
[   82.653469]  schedule+0x3d/0x90
[   82.654649]  md_super_wait+0x6e/0xa0 [md_mod]
[   82.656186]  ? wait_woken+0x80/0x80
[   82.657333]  md_update_sb.part.59+0x3df/0x840 [md_mod]
[   82.659084]  ? percpu_ref_switch_to_percpu+0x36/0x40
[   82.660477]  md_check_recovery+0x453/0x520 [md_mod]
[   82.662125]  raid10d+0x62/0x1420 [raid10]
[   82.663457]  ? __schedule+0x241/0x890
[   82.664766]  ? schedule+0x3d/0x90
[   82.665816]  ? schedule_timeout+0x208/0x390
[   82.666785]  md_thread+0x120/0x160 [md_mod]
[   82.668117]  ? md_thread+0x120/0x160 [md_mod]
[   82.669487]  ? wait_woken+0x80/0x80
[   82.670531]  kthread+0x125/0x140
[   82.671602]  ? find_pers+0x70/0x70 [md_mod]
[   82.672452]  ? kthread_create_on_node+0x70/0x70
[   82.673844]  ret_from_fork+0x25/0x30
[   82.674991] INFO: task dmcrypt_write:226 blocked for more than 20 seconds.
[   82.678246]       Not tainted 4.13.0-pf1 #1
[   82.679336] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables 
this message.
[   82.681175] dmcrypt_write   D    0   226      2 0x00000000
[   82.682522] Call Trace:
[   82.683104]  __schedule+0x239/0x890
[   82.684099]  schedule+0x3d/0x90
[   82.684754]  md_write_start+0xe3/0x270 [md_mod]
[   82.685599]  ? wait_woken+0x80/0x80
[   82.686273]  raid10_make_request+0x3f/0x140 [raid10]
[   82.687258]  md_make_request+0xa2/0x290 [md_mod]
[   82.688132]  ? _raw_spin_unlock_irq+0x10/0x30
[   82.689660]  ? finish_task_switch+0x75/0x200
[   82.690624]  generic_make_request+0x125/0x320
[   82.691722]  dmcrypt_write+0x22d/0x250 [dm_crypt]
[   82.693120]  ? dmcrypt_write+0x22d/0x250 [dm_crypt]
[   82.694760]  ? wake_up_q+0x80/0x80
[   82.695752]  kthread+0x125/0x140
[   82.696831]  ? kthread+0x125/0x140
[   82.697964]  ? crypt_iv_essiv_dtr+0x70/0x70 [dm_crypt]
[   82.699340]  ? kthread_create_on_node+0x70/0x70
[   82.700728]  ret_from_fork+0x25/0x30
[   82.702378] INFO: task NetworkManager:432 blocked for more than 20 seconds.
[   82.704022]       Not tainted 4.13.0-pf1 #1
[   82.705264] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables 
this message.
[   82.709068] NetworkManager  D    0   432      1 0x00000000
[   82.710189] Call Trace:
[   82.711041]  __schedule+0x239/0x890
[   82.712162]  schedule+0x3d/0x90
[   82.713223]  io_schedule+0x16/0x40
[   82.714324]  wait_on_page_bit_common+0xe7/0x170
[   82.715644]  ? page_cache_tree_insert+0xc0/0xc0
[   82.717008]  __filemap_fdatawait_range+0x10d/0x170
[   82.718562]  ? __filemap_fdatawrite_range+0xc1/0x100
[   82.720103]  ? __filemap_fdatawrite_range+0xcd/0x100
[   82.721561]  file_write_and_wait_range+0x78/0xa0
[   82.722839]  xfs_file_fsync+0x5f/0x210 [xfs]
[   82.724085]  vfs_fsync_range+0x4b/0xb0
[   82.725152]  do_fsync+0x3d/0x70
[   82.726535]  SyS_fsync+0x10/0x20
[   82.727953]  entry_SYSCALL_64_fastpath+0x1a/0xa5
[   82.729196] RIP: 0033:0x7fcd816f6c8d
[   82.730336] RSP: 002b:00007ffd4650d4d0 EFLAGS: 00000293 ORIG_RAX: 
000000000000004a
[   82.732192] RAX: ffffffffffffffda RBX: 0000000000000013 RCX: 
00007fcd816f6c8d
[   82.733922] RDX: 00007ffd4650d4f0 RSI: 00007ffd4650d4f0 RDI: 
0000000000000013
[   82.735313] RBP: 000056436710ff00 R08: 0000000000000000 R09: 
00000000313d26e9
[   82.738973] R10: 000000000000003d R11: 0000000000000293 R12: 
00007ffd4650d638
[   82.740531] R13: 0000000000000001 R14: 0000000000000002 R15: 
00005643670eb1c0
[   82.741869] INFO: task sync:676 blocked for more than 20 seconds.
[   82.743116]       Not tainted 4.13.0-pf1 #1
[   82.744286] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables 
this message.
[   82.745935] sync            D    0   676    542 0x00000000
[   82.747338] Call Trace:
[   82.748281]  __schedule+0x239/0x890
[   82.749421]  schedule+0x3d/0x90
[   82.750458]  io_schedule+0x16/0x40
[   82.751420]  wait_on_page_bit_common+0xe7/0x170
[   82.752668]  ? page_cache_tree_insert+0xc0/0xc0
[   82.753873]  __filemap_fdatawait_range+0x10d/0x170
[   82.755153]  ? finish_wait+0x56/0x70
[   82.756226]  filemap_fdatawait_keep_errors+0x27/0x50
[   82.757568]  sync_inodes_sb+0x204/0x2a0
[   82.758788]  ? SyS_tee+0x3d0/0x3d0
[   82.759926]  sync_inodes_one_sb+0x16/0x20
[   82.761152]  iterate_supers+0x94/0x100
[   82.762419]  sys_sync+0x44/0xb0
[   82.763499]  entry_SYSCALL_64_fastpath+0x1a/0xa5
[   82.764495] RIP: 0033:0x7fd85d7941d7
[   82.765736] RSP: 002b:00007ffe648d4f48 EFLAGS: 00000206 ORIG_RAX: 
00000000000000a2
[   82.769068] RAX: ffffffffffffffda RBX: 0000000000000006 RCX: 
00007fd85d7941d7
[   82.770663] RDX: 00007fd85da50e01 RSI: 0000000000000000 RDI: 
00007fd85d8197d3
[   82.772211] RBP: 0000000000002710 R08: 0000000000000000 R09: 
0000000000000000
[   82.774138] R10: 000000000000082c R11: 0000000000000206 R12: 
00007fd85da4ead8
[   82.776430] R13: 0000000000000030 R14: 0000000000c6cfd0 R15: 
00007fd85da4ea80
===

On úterý 29. srpna 2017 2:24:25 CEST Ming Lei wrote:
> On Mon, Aug 28, 2017 at 08:22:26PM +0200, Oleksandr Natalenko wrote:
> > Hi.
> > 
> > On pondělí 28. srpna 2017 14:58:28 CEST Ming Lei wrote:
> > > Could you verify if the following patch fixes your issue?
> > > …SNIP…
> > 
> > I've applied it to v4.12.9 and rechecked — the issue is still there,
> > unfortunately. Stacktrace is the same as before.
> > 
> > Were you able to reproduce it in a VM?
> 
> Yes, I can.
> 
> > Should I re-check it with v4.13-rc7?
> > 
> > Any other suggestions?
> 
> Please test it with v4.13-rc7 first.

  reply	other threads:[~2017-08-29 15:52 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-08-22 11:45 I/O hangs after resuming from suspend-to-ram Oleksandr Natalenko
2017-08-26 10:37 ` Oleksandr Natalenko
2017-08-26 10:48   ` Oleksandr Natalenko
2017-08-26 11:19     ` Martin Steigerwald
2017-08-26 17:17       ` Wols Lists
2017-08-26 19:33         ` Martin Steigerwald
2017-08-26 13:32     ` Oleksandr Natalenko
2017-08-27  6:02     ` Ming Lei
2017-08-27  7:43       ` Oleksandr Natalenko
2017-08-28 12:58         ` Ming Lei
2017-08-28 13:10           ` Martin Steigerwald
2017-08-28 13:32             ` Ming Lei
2017-09-20 17:25               ` Martin Steigerwald
2017-09-20 22:17                 ` Ming Lei
2017-09-24 17:33                   ` Martin Steigerwald
2017-09-25  2:59                     ` Ming Lei
2017-09-25 14:13                       ` Martin Steigerwald
2017-09-20 22:20             ` Ming Lei
2017-09-21  7:30               ` Martin Steigerwald
2017-09-21  7:33                 ` Martin Steigerwald
2017-08-28 18:22           ` Oleksandr Natalenko
2017-08-29  0:24             ` Ming Lei
2017-08-29 15:52               ` Oleksandr Natalenko [this message]
2017-08-30  2:15                 ` Ming Lei
2017-08-30  5:17                   ` Ming Lei
2017-08-30  6:15                     ` oleksandr
2017-08-30  8:06                       ` Ming Lei
2017-08-30 10:58                         ` oleksandr
2017-08-30 14:37                           ` Ming Lei

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2329566.kid2YYBOAQ@natalenko.name \
    --to=oleksandr@natalenko.name \
    --cc=axboe@kernel.dk \
    --cc=hch@lst.de \
    --cc=linux-block@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-raid@vger.kernel.org \
    --cc=ming.lei@redhat.com \
    --cc=shli@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).