From: Markus Hochholdinger <Markus@hochholdinger.net>
To: Neil Brown <neilb@suse.de>
Cc: linux-raid@vger.kernel.org, Chris Webb <chris@arachsys.com>
Subject: Re: [PATCH 018 of 29] md: Support changing rdev size on running arrays.
Date: Thu, 11 Nov 2021 16:09:56 +0100 [thread overview]
Message-ID: <2991762.XJcJRHA18g@enterprise> (raw)
In-Reply-To: <5424512.plDBMOIIcH@enterprise>
It's possible, I've found the error:
rdev->sb_start = sb_start;
is missing within md.c within /* minor version 0; superblock after data */
From my understanding, this means the new calculated superblock position isn't
used.
I changed:
--- a/drivers/md/md.c 2021-09-30 08:11:08.000000000 +0000
+++ b/drivers/md/md.c 2021-11-11 14:54:10.535633028 +0000
@@ -2252,6 +2252,7 @@
if (!num_sectors || num_sectors > max_sectors)
num_sectors = max_sectors;
+ rdev->sb_start = sb_start;
}
sb = page_address(rdev->sb_page);
sb->data_size = cpu_to_le64(num_sectors);
I tested it with 5.10.46 and resizing with superblock version 1.0 is now
working for me.
If this is correct, how can I get this into longterm 5.10.x and the current
kernel upstream?
Many thanks in advance.
--
Mfg
Markus Hochholdinger
next prev parent reply other threads:[~2021-11-11 15:10 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-06-27 6:49 [PATCH 000 of 29] md: Introduction : patchbomb for 2.6.27 merge window NeilBrown
2008-06-27 6:49 ` [PATCH 001 of 29] md: Ensure interrupted recovery completed properly (v1 metadata plus bitmap) NeilBrown
2008-07-01 7:20 ` Jan Engelhardt
2008-06-27 6:49 ` [PATCH 002 of 29] md: Don't acknowlege that stripe-expand is complete until it really is NeilBrown
2008-06-27 6:49 ` [PATCH 003 of 29] md: Fix error paths if md_probe fails NeilBrown
2008-06-27 6:49 ` [PATCH 004 of 29] md: linear: correct disk numbering error check NeilBrown
2008-06-27 6:49 ` [PATCH 005 of 29] md: use bio_endio instead of a call to bi_end_io NeilBrown
2008-06-27 6:49 ` [PATCH 006 of 29] md: Improve setting of "events_cleared" for write-intent bitmaps NeilBrown
2008-06-27 6:50 ` [PATCH 007 of 29] md: Allow setting start point for requested check/repair NeilBrown
2008-06-27 6:50 ` [PATCH 008 of 29] md: Close race in md_probe NeilBrown
2008-06-27 12:21 ` Andre Noll
2008-06-27 23:38 ` Neil Brown
2008-06-30 7:52 ` Andre Noll
2008-06-27 6:50 ` [PATCH 009 of 29] md: Don't try to make md arrays dirty if that is not meaningful NeilBrown
2008-06-27 6:50 ` [PATCH 010 of 29] md: Enable setting of 'offset' and 'size' of a hot-added spare NeilBrown
2008-06-27 6:50 ` [PATCH 011 of 29] md: Support adding a spare to a live md array with external metadata NeilBrown
2008-06-27 6:50 ` [PATCH 012 of 29] md: rationalise return value for ->hot_add_disk method NeilBrown
2008-06-27 6:50 ` [PATCH 013 of 29] md: Don't reject HOT_REMOVE_DISK request for an array that is not yet started NeilBrown
2008-06-27 6:50 ` [PATCH 014 of 29] md: Make sure all changes to md/array_state are notified NeilBrown
2008-06-27 6:50 ` [PATCH 015 of 29] md: Make sure all changes to md/sync_action " NeilBrown
2008-06-27 6:51 ` [PATCH 016 of 29] md: Make sure all changes to md/degraded " NeilBrown
2008-06-27 6:51 ` [PATCH 017 of 29] md: Make sure all changes to md/dev-XX/state " NeilBrown
2008-06-27 6:51 ` [PATCH 018 of 29] md: Support changing rdev size on running arrays NeilBrown
2008-06-27 16:09 ` Markus Hochholdinger
2008-06-27 23:41 ` Neil Brown
2010-03-30 14:52 ` Markus Hochholdinger
2010-03-31 5:41 ` Neil Brown
2010-04-01 15:23 ` Markus Hochholdinger
2012-03-24 20:47 ` Markus Hochholdinger
2012-03-25 22:15 ` NeilBrown
2021-11-10 13:09 ` Markus Hochholdinger
2021-11-10 17:51 ` Markus Hochholdinger
2021-11-11 13:10 ` Markus Hochholdinger
2021-11-11 15:09 ` Markus Hochholdinger [this message]
2021-11-12 1:22 ` Guoqing Jiang
2021-11-12 14:31 ` Markus Hochholdinger
2008-06-27 6:51 ` [PATCH 019 of 29] md: md: kill STRIPE_OP_MOD_DMA in raid5 offload NeilBrown
2008-06-27 6:51 ` [PATCH 020 of 29] md: md: kill STRIPE_OP_IO flag NeilBrown
2008-06-27 6:51 ` [PATCH 021 of 29] md: md: use stripe_head_state in ops_run_io() NeilBrown
2008-06-27 6:51 ` [PATCH 022 of 29] md: md: unify raid5/6 i/o submission NeilBrown
2008-06-27 6:51 ` [PATCH 023 of 29] md: md: replace STRIPE_OP_CHECK with 'check_states' NeilBrown
2008-06-27 6:51 ` [PATCH 024 of 29] md: md: replace STRIPE_OP_BIOFILL with STRIPE_BIOFILL_RUN NeilBrown
2008-06-27 6:52 ` [PATCH 025 of 29] md: md: replace STRIPE_OP_COMPUTE_BLK with STRIPE_COMPUTE_RUN NeilBrown
2008-06-27 6:52 ` [PATCH 026 of 29] md: md: replace STRIPE_OP_{BIODRAIN,PREXOR,POSTXOR} with 'reconstruct_states' NeilBrown
2008-06-27 6:52 ` [PATCH 027 of 29] md: md: replace R5_WantPrexor with R5_WantDrain, add 'prexor' reconstruct_states NeilBrown
2008-06-27 6:52 ` [PATCH 028 of 29] md: md: handle operation chaining in raid5_run_ops NeilBrown
2008-06-27 6:52 ` [PATCH 029 of 29] md: md: rationalize raid5 function names NeilBrown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2991762.XJcJRHA18g@enterprise \
--to=markus@hochholdinger.net \
--cc=chris@arachsys.com \
--cc=linux-raid@vger.kernel.org \
--cc=neilb@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).