From: Semyon Enskiy <semyon.enskiy@yandex.ru>
To: Phil Turmel <philip@turmel.org>,
"linux-raid@vger.kernel.org" <linux-raid@vger.kernel.org>
Subject: Re: Recovering RAID5 with 2, actually 1, faulty disks.
Date: Wed, 25 Nov 2015 15:12:43 +0300 [thread overview]
Message-ID: <3822301448453563@web17m.yandex.ru> (raw)
In-Reply-To: <565359F6.3020201@turmel.org>
Hi Phil.
Thanks for your suggestions, I have followed them, but RAID5 at md3 not
recovered at yet, maybe you will find time to suggest anything else.
Exactly, power and data connections of SATA disks was not reliable, fixed
this and after boot get no errors in kernel logs.
md3 was replaced with "<ingore>" in mdadm.conf and commented in fstab before
poweroff, things returned back after boot.
# mdadm --assemble --update=revert-reshape /dev/md3
# mdadm --assemble --scan -vv
mdadm: looking for devices for /dev/md1
mdadm: no recogniseable superblock on /dev/dm-1
mdadm: no recogniseable superblock on /dev/dm-0
mdadm: no recogniseable superblock on /dev/sdj4
mdadm: /dev/sdj3 has wrong uuid.
mdadm: /dev/sdj2 has wrong uuid.
mdadm: UUID differs from /dev/md/2.
mdadm: UUID differs from /dev/md/3.
mdadm: /dev/sdj1 is busy - skipping
mdadm: Cannot assemble mbr metadata on /dev/sdj
mdadm: no recogniseable superblock on /dev/sdi4
mdadm: /dev/sdi3 has wrong uuid.
mdadm: /dev/sdi2 has wrong uuid.
mdadm: UUID differs from /dev/md/2.
mdadm: UUID differs from /dev/md/3.
mdadm: /dev/sdi1 is busy - skipping
mdadm: Cannot assemble mbr metadata on /dev/sdi
mdadm: no recogniseable superblock on /dev/sdh4
mdadm: /dev/sdh3 has wrong uuid.
mdadm: /dev/sdh2 has wrong uuid.
mdadm: UUID differs from /dev/md/2.
mdadm: UUID differs from /dev/md/3.
mdadm: /dev/sdh1 is busy - skipping
mdadm: Cannot assemble mbr metadata on /dev/sdh
mdadm: no recogniseable superblock on /dev/md/2
mdadm: no recogniseable superblock on /dev/md1
mdadm: no recogniseable superblock on /dev/sdg4
mdadm: /dev/sdg3 has wrong uuid.
mdadm: /dev/sdg2 has wrong uuid.
mdadm: UUID differs from /dev/md/2.
mdadm: UUID differs from /dev/md/3.
mdadm: /dev/sdg1 is busy - skipping
mdadm: Cannot assemble mbr metadata on /dev/sdg
mdadm: no recogniseable superblock on /dev/sdb4
mdadm: /dev/sdb3 has wrong uuid.
mdadm: /dev/sdb2 has wrong uuid.
mdadm: UUID differs from /dev/md/2.
mdadm: UUID differs from /dev/md/3.
mdadm: /dev/sdb1 is busy - skipping
mdadm: Cannot assemble mbr metadata on /dev/sdb
mdadm: no recogniseable superblock on /dev/sdf4
mdadm: /dev/sdf3 has wrong uuid.
mdadm: /dev/sdf2 has wrong uuid.
mdadm: UUID differs from /dev/md/2.
mdadm: UUID differs from /dev/md/3.
mdadm: /dev/sdf1 is busy - skipping
mdadm: Cannot assemble mbr metadata on /dev/sdf
mdadm: no recogniseable superblock on /dev/sde4
mdadm: /dev/sde3 has wrong uuid.
mdadm: /dev/sde2 has wrong uuid.
mdadm: UUID differs from /dev/md/2.
mdadm: UUID differs from /dev/md/3.
mdadm: /dev/sde1 is busy - skipping
mdadm: Cannot assemble mbr metadata on /dev/sde
mdadm: no recogniseable superblock on /dev/sdd4
mdadm: /dev/sdd3 has wrong uuid.
mdadm: /dev/sdd2 has wrong uuid.
mdadm: UUID differs from /dev/md/2.
mdadm: UUID differs from /dev/md/3.
mdadm: /dev/sdd1 is busy - skipping
mdadm: Cannot assemble mbr metadata on /dev/sdd
mdadm: no recogniseable superblock on /dev/sdc4
mdadm: /dev/sdc3 has wrong uuid.
mdadm: /dev/sdc2 has wrong uuid.
mdadm: UUID differs from /dev/md/2.
mdadm: UUID differs from /dev/md/3.
mdadm: /dev/sdc1 is busy - skipping
mdadm: Cannot assemble mbr metadata on /dev/sdc
mdadm: no recogniseable superblock on /dev/sda4
mdadm: /dev/sda3 has wrong uuid.
mdadm: /dev/sda2 has wrong uuid.
mdadm: UUID differs from /dev/md/2.
mdadm: UUID differs from /dev/md/3.
mdadm: /dev/sda1 is busy - skipping
mdadm: Cannot assemble mbr metadata on /dev/sda
mdadm: looking for devices for /dev/md/2
mdadm: no RAID superblock on /dev/dm-1
mdadm: no RAID superblock on /dev/dm-0
mdadm: no RAID superblock on /dev/sdj4
mdadm: /dev/sdj3 has wrong uuid.
mdadm: UUID differs from /dev/md1.
mdadm: UUID differs from /dev/md/3.
mdadm: /dev/sdj2 is busy - skipping
mdadm: no RAID superblock on /dev/sdj1
mdadm: no RAID superblock on /dev/sdj
mdadm: no RAID superblock on /dev/sdi4
mdadm: /dev/sdi3 has wrong uuid.
mdadm: UUID differs from /dev/md1.
mdadm: UUID differs from /dev/md/3.
mdadm: /dev/sdi2 is busy - skipping
mdadm: no RAID superblock on /dev/sdi1
mdadm: no RAID superblock on /dev/sdi
mdadm: no RAID superblock on /dev/sdh4
mdadm: /dev/sdh3 has wrong uuid.
mdadm: UUID differs from /dev/md1.
mdadm: UUID differs from /dev/md/3.
mdadm: /dev/sdh2 is busy - skipping
mdadm: no RAID superblock on /dev/sdh1
mdadm: no RAID superblock on /dev/sdh
mdadm: no RAID superblock on /dev/md/2
mdadm: no RAID superblock on /dev/md1
mdadm: no RAID superblock on /dev/sdg4
mdadm: /dev/sdg3 has wrong uuid.
mdadm: UUID differs from /dev/md1.
mdadm: UUID differs from /dev/md/3.
mdadm: /dev/sdg2 is busy - skipping
mdadm: no RAID superblock on /dev/sdg1
mdadm: no RAID superblock on /dev/sdg
mdadm: no RAID superblock on /dev/sdb4
mdadm: /dev/sdb3 has wrong uuid.
mdadm: UUID differs from /dev/md1.
mdadm: UUID differs from /dev/md/3.
mdadm: /dev/sdb2 is busy - skipping
mdadm: no RAID superblock on /dev/sdb1
mdadm: no RAID superblock on /dev/sdb
mdadm: no RAID superblock on /dev/sdf4
mdadm: /dev/sdf3 has wrong uuid.
mdadm: UUID differs from /dev/md1.
mdadm: UUID differs from /dev/md/3.
mdadm: /dev/sdf2 is busy - skipping
mdadm: no RAID superblock on /dev/sdf1
mdadm: no RAID superblock on /dev/sdf
mdadm: no RAID superblock on /dev/sde4
mdadm: /dev/sde3 has wrong uuid.
mdadm: UUID differs from /dev/md1.
mdadm: UUID differs from /dev/md/3.
mdadm: /dev/sde2 is busy - skipping
mdadm: no RAID superblock on /dev/sde1
mdadm: no RAID superblock on /dev/sde
mdadm: no RAID superblock on /dev/sdd4
mdadm: /dev/sdd3 has wrong uuid.
mdadm: UUID differs from /dev/md1.
mdadm: UUID differs from /dev/md/3.
mdadm: /dev/sdd2 is busy - skipping
mdadm: no RAID superblock on /dev/sdd1
mdadm: no RAID superblock on /dev/sdd
mdadm: no RAID superblock on /dev/sdc4
mdadm: /dev/sdc3 has wrong uuid.
mdadm: UUID differs from /dev/md1.
mdadm: UUID differs from /dev/md/3.
mdadm: /dev/sdc2 is busy - skipping
mdadm: no RAID superblock on /dev/sdc1
mdadm: no RAID superblock on /dev/sdc
mdadm: no RAID superblock on /dev/sda4
mdadm: /dev/sda3 has wrong uuid.
mdadm: UUID differs from /dev/md1.
mdadm: UUID differs from /dev/md/3.
mdadm: /dev/sda2 is busy - skipping
mdadm: no RAID superblock on /dev/sda1
mdadm: no RAID superblock on /dev/sda
mdadm: looking for devices for /dev/md/3
mdadm: no RAID superblock on /dev/dm-1
mdadm: no RAID superblock on /dev/dm-0
mdadm: no RAID superblock on /dev/sdj4
mdadm: UUID differs from /dev/md1.
mdadm: UUID differs from /dev/md/2.
mdadm: /dev/sdj3 is busy - skipping
mdadm: /dev/sdj2 has wrong uuid.
mdadm: no RAID superblock on /dev/sdj1
mdadm: no RAID superblock on /dev/sdj
mdadm: no RAID superblock on /dev/sdi4
mdadm: UUID differs from /dev/md1.
mdadm: UUID differs from /dev/md/2.
mdadm: /dev/sdi3 is busy - skipping
mdadm: /dev/sdi2 has wrong uuid.
mdadm: no RAID superblock on /dev/sdi1
mdadm: no RAID superblock on /dev/sdi
mdadm: no RAID superblock on /dev/sdh4
mdadm: UUID differs from /dev/md1.
mdadm: UUID differs from /dev/md/2.
mdadm: /dev/sdh3 is busy - skipping
mdadm: /dev/sdh2 has wrong uuid.
mdadm: no RAID superblock on /dev/sdh1
mdadm: no RAID superblock on /dev/sdh
mdadm: no RAID superblock on /dev/md/2
mdadm: no RAID superblock on /dev/md1
mdadm: no RAID superblock on /dev/sdg4
mdadm: UUID differs from /dev/md1.
mdadm: UUID differs from /dev/md/2.
mdadm: /dev/sdg3 is busy - skipping
mdadm: /dev/sdg2 has wrong uuid.
mdadm: no RAID superblock on /dev/sdg1
mdadm: no RAID superblock on /dev/sdg
mdadm: no RAID superblock on /dev/sdb4
mdadm: UUID differs from /dev/md1.
mdadm: UUID differs from /dev/md/2.
mdadm: /dev/sdb3 is busy - skipping
mdadm: /dev/sdb2 has wrong uuid.
mdadm: no RAID superblock on /dev/sdb1
mdadm: no RAID superblock on /dev/sdb
mdadm: no RAID superblock on /dev/sdf4
mdadm: UUID differs from /dev/md1.
mdadm: UUID differs from /dev/md/2.
mdadm: /dev/sdf3 is busy - skipping
mdadm: /dev/sdf2 has wrong uuid.
mdadm: no RAID superblock on /dev/sdf1
mdadm: no RAID superblock on /dev/sdf
mdadm: no RAID superblock on /dev/sde4
mdadm: UUID differs from /dev/md1.
mdadm: UUID differs from /dev/md/2.
mdadm: /dev/sde3 is busy - skipping
mdadm: /dev/sde2 has wrong uuid.
mdadm: no RAID superblock on /dev/sde1
mdadm: no RAID superblock on /dev/sde
mdadm: no RAID superblock on /dev/sdd4
mdadm: UUID differs from /dev/md1.
mdadm: UUID differs from /dev/md/2.
mdadm: /dev/sdd3 is busy - skipping
mdadm: /dev/sdd2 has wrong uuid.
mdadm: no RAID superblock on /dev/sdd1
mdadm: no RAID superblock on /dev/sdd
mdadm: no RAID superblock on /dev/sdc4
mdadm: UUID differs from /dev/md1.
mdadm: UUID differs from /dev/md/2.
mdadm: /dev/sdc3 is busy - skipping
mdadm: /dev/sdc2 has wrong uuid.
mdadm: no RAID superblock on /dev/sdc1
mdadm: no RAID superblock on /dev/sdc
mdadm: no RAID superblock on /dev/sda4
mdadm: UUID differs from /dev/md1.
mdadm: UUID differs from /dev/md/2.
mdadm: /dev/sda3 is busy - skipping
mdadm: /dev/sda2 has wrong uuid.
mdadm: no RAID superblock on /dev/sda1
mdadm: no RAID superblock on /dev/sda
Note the difference in --display and --examine outputs (see below) about
total and delta device numbers, 10 in detail and 11 in examine.
Also note, that sda3 is marked as "spare" device, I am wrote before in first
message, that some useless commands was executed.
# mdadm --add /dev/md3 --re-add /dev/sda3
mdadm: Cannot get array info for /dev/md3
# This is because array is not started?
# cat /proc/mdstat
Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10]
md2 : active raid10 sdd2[8] sdg2[6] sdh2[4] sdj2[5] sdi2[11] sdb2[1] sdc2[10] sdf2[0] sde2[9] sda2[12]
35653120 blocks super 1.2 512K chunks 2 near-copies [10/10] [UUUUUUUUUU]
bitmap: 1/1 pages [4KB], 65536KB chunk
md3 : inactive sdg3[3](S) sdh3[2](S) sdj3[10](S) sdi3[12](S) sdb3[6](S) sdc3[11](S) sdf3[0](S) sdd3[4](S) sde3[5](S) sda3[14](S)
38995474635 blocks super 1.2
md1 : active raid1 sdd1[4] sdg1[3] sdh1[2] sdj1[8] sdi1[1] sdb1[6] sdc1[7] sdf1[0] sde1[5] sda1[9]
203712 blocks [10/10] [UUUUUUUUUU]
bitmap: 0/1 pages [0KB], 65536KB chunk
# mdadm --detail /dev/md3
/dev/md3:
Version : 1.2
Raid Level : raid0
Total Devices : 10
Persistence : Superblock is persistent
State : inactive
Delta Devices : 1, (-1->0)
New Level : raid5
New Layout : left-symmetric
New Chunksize : 512K
Name : ubuntu:3
UUID : 9bdc0939:483889af:b67c199b:2aaecb4e
Events : 21586
Number Major Minor RaidDevice
- 8 3 - /dev/sda3
- 8 19 - /dev/sdb3
- 8 35 - /dev/sdc3
- 8 51 - /dev/sdd3
- 8 67 - /dev/sde3
- 8 83 - /dev/sdf3
- 8 99 - /dev/sdg3
- 8 115 - /dev/sdh3
- 8 131 - /dev/sdi3
- 8 147 - /dev/sdj3
# mdadm --examine /dev/sd?3
/dev/sda3:
Magic : a92b4efc
Version : 1.2
Feature Map : 0x45
Array UUID : 9bdc0939:483889af:b67c199b:2aaecb4e
Name : ubuntu:3
Creation Time : Thu Jul 24 16:06:32 2014
Raid Level : raid5
Raid Devices : 11
Avail Dev Size : 7799094927 (3718.90 GiB 3993.14 GB)
Array Size : 38995471360 (37188.98 GiB 39931.36 GB)
Used Dev Size : 7799094272 (3718.90 GiB 3993.14 GB)
Data Offset : 262144 sectors
New Offset : 251904 sectors
Super Offset : 8 sectors
State : clean
Device UUID : c0155214:a9c8e378:d368b6f6:735048a8
Internal Bitmap : 8 sectors from superblock
Reshape pos'n : 0
Delta Devices : 1 (10->11)
Update Time : Fri Nov 6 16:53:06 2015
Bad Block Log : 512 entries available at offset 72 sectors
Checksum : 952a55f2 - correct
Events : 21586
Layout : left-symmetric
Chunk Size : 512K
Device Role : spare
Array State : AAAAAAAA.A. ('A' == active, '.' == missing, 'R' == replacing)
/dev/sdb3:
Magic : a92b4efc
Version : 1.2
Feature Map : 0x45
Array UUID : 9bdc0939:483889af:b67c199b:2aaecb4e
Name : ubuntu:3
Creation Time : Thu Jul 24 16:06:32 2014
Raid Level : raid5
Raid Devices : 11
Avail Dev Size : 7799094927 (3718.90 GiB 3993.14 GB)
Array Size : 38995471360 (37188.98 GiB 39931.36 GB)
Used Dev Size : 7799094272 (3718.90 GiB 3993.14 GB)
Data Offset : 262144 sectors
New Offset : 251904 sectors
Super Offset : 8 sectors
State : clean
Device UUID : 375d85e2:9077dd68:bc1327af:8fee4112
Internal Bitmap : 8 sectors from superblock
Reshape pos'n : 0
Delta Devices : 1 (10->11)
Update Time : Fri Nov 6 16:53:06 2015
Checksum : 75b99505 - correct
Events : 21586
Layout : left-symmetric
Chunk Size : 512K
Device Role : Active device 6
Array State : AAAAAAAA.A. ('A' == active, '.' == missing, 'R' == replacing)
/dev/sdc3:
Magic : a92b4efc
Version : 1.2
Feature Map : 0x45
Array UUID : 9bdc0939:483889af:b67c199b:2aaecb4e
Name : ubuntu:3
Creation Time : Thu Jul 24 16:06:32 2014
Raid Level : raid5
Raid Devices : 11
Avail Dev Size : 7799094927 (3718.90 GiB 3993.14 GB)
Array Size : 38995471360 (37188.98 GiB 39931.36 GB)
Used Dev Size : 7799094272 (3718.90 GiB 3993.14 GB)
Data Offset : 262144 sectors
New Offset : 251904 sectors
Super Offset : 8 sectors
State : clean
Device UUID : 67cd2bfa:affa578c:e0c1286a:bd4d2627
Internal Bitmap : 8 sectors from superblock
Reshape pos'n : 0
Delta Devices : 1 (10->11)
Update Time : Fri Nov 6 16:53:06 2015
Bad Block Log : 512 entries available at offset 72 sectors
Checksum : 80c895f3 - correct
Events : 21586
Layout : left-symmetric
Chunk Size : 512K
Device Role : Active device 7
Array State : AAAAAAAA.A. ('A' == active, '.' == missing, 'R' == replacing)
/dev/sdd3:
Magic : a92b4efc
Version : 1.2
Feature Map : 0x45
Array UUID : 9bdc0939:483889af:b67c199b:2aaecb4e
Name : ubuntu:3
Creation Time : Thu Jul 24 16:06:32 2014
Raid Level : raid5
Raid Devices : 11
Avail Dev Size : 7799094927 (3718.90 GiB 3993.14 GB)
Array Size : 38995471360 (37188.98 GiB 39931.36 GB)
Used Dev Size : 7799094272 (3718.90 GiB 3993.14 GB)
Data Offset : 262144 sectors
New Offset : 251904 sectors
Super Offset : 8 sectors
State : clean
Device UUID : 4490843e:d2c5c2e7:d222fa0a:f98b277c
Internal Bitmap : 8 sectors from superblock
Reshape pos'n : 0
Delta Devices : 1 (10->11)
Update Time : Fri Nov 6 16:53:06 2015
Checksum : 1656c2d2 - correct
Events : 21586
Layout : left-symmetric
Chunk Size : 512K
Device Role : Active device 4
Array State : AAAAAAAA.A. ('A' == active, '.' == missing, 'R' == replacing)
/dev/sde3:
Magic : a92b4efc
Version : 1.2
Feature Map : 0x45
Array UUID : 9bdc0939:483889af:b67c199b:2aaecb4e
Name : ubuntu:3
Creation Time : Thu Jul 24 16:06:32 2014
Raid Level : raid5
Raid Devices : 11
Avail Dev Size : 7799094927 (3718.90 GiB 3993.14 GB)
Array Size : 38995471360 (37188.98 GiB 39931.36 GB)
Used Dev Size : 7799094272 (3718.90 GiB 3993.14 GB)
Data Offset : 262144 sectors
New Offset : 251904 sectors
Super Offset : 8 sectors
State : clean
Device UUID : 1d41056f:88149b1a:48e939e5:8c775e23
Internal Bitmap : 8 sectors from superblock
Reshape pos'n : 0
Delta Devices : 1 (10->11)
Update Time : Fri Nov 6 16:53:06 2015
Checksum : fb26746a - correct
Events : 21586
Layout : left-symmetric
Chunk Size : 512K
Device Role : Active device 5
Array State : AAAAAAAA.A. ('A' == active, '.' == missing, 'R' == replacing)
/dev/sdf3:
Magic : a92b4efc
Version : 1.2
Feature Map : 0x45
Array UUID : 9bdc0939:483889af:b67c199b:2aaecb4e
Name : ubuntu:3
Creation Time : Thu Jul 24 16:06:32 2014
Raid Level : raid5
Raid Devices : 11
Avail Dev Size : 7799094927 (3718.90 GiB 3993.14 GB)
Array Size : 38995471360 (37188.98 GiB 39931.36 GB)
Used Dev Size : 7799094272 (3718.90 GiB 3993.14 GB)
Data Offset : 262144 sectors
New Offset : 251904 sectors
Super Offset : 8 sectors
State : clean
Device UUID : fa7c541d:a25babd8:14ffe1c0:c6c1578c
Internal Bitmap : 8 sectors from superblock
Reshape pos'n : 0
Delta Devices : 1 (10->11)
Update Time : Fri Nov 6 16:53:06 2015
Checksum : ac275763 - correct
Events : 21586
Layout : left-symmetric
Chunk Size : 512K
Device Role : Active device 0
Array State : AAAAAAAA.A. ('A' == active, '.' == missing, 'R' == replacing)
/dev/sdg3:
Magic : a92b4efc
Version : 1.2
Feature Map : 0x45
Array UUID : 9bdc0939:483889af:b67c199b:2aaecb4e
Name : ubuntu:3
Creation Time : Thu Jul 24 16:06:32 2014
Raid Level : raid5
Raid Devices : 11
Avail Dev Size : 7799094927 (3718.90 GiB 3993.14 GB)
Array Size : 38995471360 (37188.98 GiB 39931.36 GB)
Used Dev Size : 7799094272 (3718.90 GiB 3993.14 GB)
Data Offset : 262144 sectors
New Offset : 251904 sectors
Super Offset : 8 sectors
State : clean
Device UUID : a4b8b425:b0307fe5:9eb8e3ac:ae985311
Internal Bitmap : 8 sectors from superblock
Reshape pos'n : 0
Delta Devices : 1 (10->11)
Update Time : Fri Nov 6 16:53:06 2015
Checksum : 3258f890 - correct
Events : 21586
Layout : left-symmetric
Chunk Size : 512K
Device Role : Active device 3
Array State : AAAAAAAA.A. ('A' == active, '.' == missing, 'R' == replacing)
/dev/sdh3:
Magic : a92b4efc
Version : 1.2
Feature Map : 0x45
Array UUID : 9bdc0939:483889af:b67c199b:2aaecb4e
Name : ubuntu:3
Creation Time : Thu Jul 24 16:06:32 2014
Raid Level : raid5
Raid Devices : 11
Avail Dev Size : 7799094927 (3718.90 GiB 3993.14 GB)
Array Size : 38995471360 (37188.98 GiB 39931.36 GB)
Used Dev Size : 7799094272 (3718.90 GiB 3993.14 GB)
Data Offset : 262144 sectors
New Offset : 251904 sectors
Super Offset : 8 sectors
State : clean
Device UUID : 345b0212:6c3a0ae8:d8ed9273:ecc53573
Internal Bitmap : 8 sectors from superblock
Reshape pos'n : 0
Delta Devices : 1 (10->11)
Update Time : Fri Nov 6 16:53:06 2015
Checksum : 49c30753 - correct
Events : 21586
Layout : left-symmetric
Chunk Size : 512K
Device Role : Active device 2
Array State : AAAAAAAA.A. ('A' == active, '.' == missing, 'R' == replacing)
/dev/sdi3:
Magic : a92b4efc
Version : 1.2
Feature Map : 0x45
Array UUID : 9bdc0939:483889af:b67c199b:2aaecb4e
Name : ubuntu:3
Creation Time : Thu Jul 24 16:06:32 2014
Raid Level : raid5
Raid Devices : 11
Avail Dev Size : 7799094927 (3718.90 GiB 3993.14 GB)
Array Size : 38995471360 (37188.98 GiB 39931.36 GB)
Used Dev Size : 7799094272 (3718.90 GiB 3993.14 GB)
Data Offset : 262144 sectors
New Offset : 251904 sectors
Super Offset : 8 sectors
State : clean
Device UUID : 70afdaad:b0979fb1:1b99ef18:dd58cc3a
Internal Bitmap : 8 sectors from superblock
Reshape pos'n : 0
Delta Devices : 1 (10->11)
Update Time : Fri Nov 6 16:53:06 2015
Bad Block Log : 512 entries available at offset 72 sectors
Checksum : 1c2bf759 - correct
Events : 21586
Layout : left-symmetric
Chunk Size : 512K
Device Role : Active device 1
Array State : AAAAAAAA.A. ('A' == active, '.' == missing, 'R' == replacing)
/dev/sdj3:
Magic : a92b4efc
Version : 1.2
Feature Map : 0x45
Array UUID : 9bdc0939:483889af:b67c199b:2aaecb4e
Name : ubuntu:3
Creation Time : Thu Jul 24 16:06:32 2014
Raid Level : raid5
Raid Devices : 11
Avail Dev Size : 7799094927 (3718.90 GiB 3993.14 GB)
Array Size : 38995471360 (37188.98 GiB 39931.36 GB)
Used Dev Size : 7799094272 (3718.90 GiB 3993.14 GB)
Data Offset : 262144 sectors
New Offset : 251904 sectors
Super Offset : 8 sectors
State : clean
Device UUID : a5f2cea8:a89c88a0:0dd3900c:624f0491
Internal Bitmap : 8 sectors from superblock
Reshape pos'n : 0
Delta Devices : 1 (10->11)
Update Time : Fri Nov 6 16:53:06 2015
Checksum : 4fda6fb3 - correct
Events : 21586
Layout : left-symmetric
Chunk Size : 512K
Device Role : Active device 9
Array State : AAAAAAAA.A. ('A' == active, '.' == missing, 'R' == replacing)
# for x in /dev/sd[a-z] ; do echo $x ; smartctl -i -A $x ; done
/dev/sda
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-57-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: WDC WD40EFRX-68WT0N0
Serial Number: WD-WCC4E1657399
LU WWN Device Id: 5 0014ee 2b4caa93a
Firmware Version: 80.00A80
User Capacity: 4 000 787 030 016 bytes [4,00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Wed Nov 25 14:25:50 2015 MSK
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0027 179 179 021 Pre-fail Always - 8033
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 9
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
9 Power_On_Hours 0x0032 089 089 000 Old_age Always - 8756
10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 9
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 3
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 66
194 Temperature_Celsius 0x0022 117 102 000 Old_age Always - 35
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0
/dev/sdb
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-57-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: WDC WD40EFRX-68WT0N0
Serial Number: WD-WCC4E1643332
LU WWN Device Id: 5 0014ee 25f74cf3c
Firmware Version: 80.00A80
User Capacity: 4 000 787 030 016 bytes [4,00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Wed Nov 25 14:25:50 2015 MSK
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0027 182 181 021 Pre-fail Always - 7866
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 19
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
9 Power_On_Hours 0x0032 084 084 000 Old_age Always - 11724
10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 19
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 5
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 106
194 Temperature_Celsius 0x0022 117 102 000 Old_age Always - 35
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0
/dev/sdc
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-57-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: WDC WD40EFRX-68WT0N0
Serial Number: WD-WCC4E1649141
LU WWN Device Id: 5 0014ee 25f74a7c9
Firmware Version: 80.00A80
User Capacity: 4 000 787 030 016 bytes [4,00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Wed Nov 25 14:25:50 2015 MSK
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0027 185 183 021 Pre-fail Always - 7741
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 14
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
9 Power_On_Hours 0x0032 085 085 000 Old_age Always - 11439
10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 14
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 3
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 84
194 Temperature_Celsius 0x0022 118 105 000 Old_age Always - 34
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0
/dev/sdd
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-57-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: WDC WD40EFRX-68WT0N0
Serial Number: WD-WCC4E0340253
LU WWN Device Id: 5 0014ee 20921e030
Firmware Version: 80.00A80
User Capacity: 4 000 787 030 016 bytes [4,00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Wed Nov 25 14:25:50 2015 MSK
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0027 175 173 021 Pre-fail Always - 8241
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 28
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
9 Power_On_Hours 0x0032 081 081 000 Old_age Always - 14575
10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 28
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 9
193 Load_Cycle_Count 0x0032 001 001 000 Old_age Always - 1496402
194 Temperature_Celsius 0x0022 114 108 000 Old_age Always - 38
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0
/dev/sde
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-57-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: WDC WD40EFRX-68WT0N0
Serial Number: WD-WCC4E1658818
LU WWN Device Id: 5 0014ee 20a1fca11
Firmware Version: 80.00A80
User Capacity: 4 000 787 030 016 bytes [4,00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Wed Nov 25 14:25:50 2015 MSK
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0027 185 183 021 Pre-fail Always - 7733
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 15
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
9 Power_On_Hours 0x0032 084 084 000 Old_age Always - 11700
10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 15
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 3
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 101
194 Temperature_Celsius 0x0022 116 109 000 Old_age Always - 36
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0
/dev/sdf
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-57-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: WDC WD40EFRX-68WT0N0
Serial Number: WD-WCC4E1349511
LU WWN Device Id: 5 0014ee 2b4a00452
Firmware Version: 80.00A80
User Capacity: 4 000 787 030 016 bytes [4,00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Wed Nov 25 14:25:50 2015 MSK
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0027 178 176 021 Pre-fail Always - 8100
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 27
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
9 Power_On_Hours 0x0032 082 082 000 Old_age Always - 13576
10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 27
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 8
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 120
194 Temperature_Celsius 0x0022 117 110 000 Old_age Always - 35
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0
/dev/sdg
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-57-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: WDC WD40EFRX-68WT0N0
Serial Number: WD-WCC4E1265787
LU WWN Device Id: 5 0014ee 25f483dfb
Firmware Version: 80.00A80
User Capacity: 4 000 787 030 016 bytes [4,00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Wed Nov 25 14:25:50 2015 MSK
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 55
3 Spin_Up_Time 0x0027 177 175 021 Pre-fail Always - 8141
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 23
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
9 Power_On_Hours 0x0032 084 084 000 Old_age Always - 11746
10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 23
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 9
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 104
194 Temperature_Celsius 0x0022 115 107 000 Old_age Always - 37
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0
/dev/sdh
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-57-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: WDC WD40EFRX-68WT0N0
Serial Number: WD-WCC4E1639809
LU WWN Device Id: 5 0014ee 25f7425d2
Firmware Version: 80.00A80
User Capacity: 4 000 787 030 016 bytes [4,00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Wed Nov 25 14:25:50 2015 MSK
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0027 180 179 021 Pre-fail Always - 7958
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 17
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
9 Power_On_Hours 0x0032 084 084 000 Old_age Always - 11722
10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 17
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 3
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 103
194 Temperature_Celsius 0x0022 115 107 000 Old_age Always - 37
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0
/dev/sdi
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-57-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: WDC WD40EFRX-68WT0N0
Serial Number: WD-WCC4E1639009
LU WWN Device Id: 5 0014ee 25f752df3
Firmware Version: 80.00A80
User Capacity: 4 000 787 030 016 bytes [4,00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Wed Nov 25 14:25:50 2015 MSK
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0027 179 177 021 Pre-fail Always - 8016
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 12
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
9 Power_On_Hours 0x0032 085 085 000 Old_age Always - 11393
10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 12
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 3
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 83
194 Temperature_Celsius 0x0022 117 105 000 Old_age Always - 35
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0
/dev/sdj
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-57-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: WDC WD40EFRX-68WT0N0
Serial Number: WD-WCC4E1228884
LU WWN Device Id: 5 0014ee 209e58132
Firmware Version: 80.00A80
User Capacity: 4 000 787 030 016 bytes [4,00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Wed Nov 25 14:25:51 2015 MSK
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0027 175 174 021 Pre-fail Always - 8208
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 27
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
9 Power_On_Hours 0x0032 082 082 000 Old_age Always - 13598
10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 27
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 8
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 120
194 Temperature_Celsius 0x0022 117 102 000 Old_age Always - 35
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0
END OF MESSAGE
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2015-11-25 12:12 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-23 15:28 Recovering RAID5 with 2, actually 1, faulty disks Semyon Enskiy
2015-11-23 15:35 ` Semyon Enskiy
2015-11-23 15:47 ` Wols Lists
2015-11-23 15:57 ` Semyon Enskiy
2015-11-23 16:08 ` Wols Lists
2015-11-23 18:24 ` Phil Turmel
2015-11-25 12:12 ` Semyon Enskiy [this message]
2015-11-25 13:22 ` Phil Turmel
2015-11-25 14:48 ` Semyon Enskiy
2015-11-25 14:55 ` Semyon Enskiy
2015-11-25 15:44 ` Phil Turmel
2015-11-25 16:29 ` Semyon Enskiy
2015-11-25 16:58 ` Phil Turmel
2015-11-25 17:32 ` Semyon Enskiy
2015-11-25 17:49 ` Phil Turmel
2015-11-26 13:21 ` Semyon Enskiy
-- strict thread matches above, loose matches on Subject: below --
2015-12-02 13:35 Semyon Enskiy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3822301448453563@web17m.yandex.ru \
--to=semyon.enskiy@yandex.ru \
--cc=linux-raid@vger.kernel.org \
--cc=philip@turmel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox