From: Luca Berra <bluca@comedia.it>
To: linux-raid@vger.kernel.org
Subject: Re: (no subject)
Date: Thu, 12 Sep 2002 07:48:40 +0200 [thread overview]
Message-ID: <3D802AB8.4000704@comedia.it> (raw)
In-Reply-To: 3D7F8B2E.14D49808@milleraa.com
Eddie Johnson wrote:
> I installed Suse Linux Professional 8 on a HP Netserver LC3 PII/450. An
> AHA-2940 UW Scsi host adapter with a AIC-78XX Scsi Protocol Chip/50 pin
> high density scsi-2 control. I have a raid (3 drives) off the host
No, you have an HP NetRaid Adapter (Aka AMI megaraid)
> adapter and a 80 gig scsi drive off the mother board. After launching
> yast2 the first raid has the following device: LD0 raid 5 34730R:
> device_name /dev/sda, vendor megaraid. Disk two (80 gig drive) has LD1
> raid 0 70006R: device name /dev/sdb vendor the same as above. There was
> no raidtab file so I created one with the following: >
.........
> If I read this correctly both are inactive when it should be stating
> that they are active. At this point I am baffled any suggestions or
> possible directions would greatly be appreciated.
you don't need md, mkraid or such,
if you want to configure your hw raid just press Ctrl-M at boot
or start the server from the Navigator CD
L.
next prev parent reply other threads:[~2002-09-12 5:48 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-09-11 18:27 (no subject) Eddie Johnson
2002-09-11 19:50 ` Alvin Oga
2002-09-11 20:42 ` Neil Brown
2002-09-12 5:48 ` Luca Berra [this message]
-- strict thread matches above, loose matches on Subject: below --
2017-01-09 11:33 [PATCH v2 0/7] uapi: export all headers under uapi directories Arnd Bergmann
2017-01-13 10:46 ` [PATCH v3 0/8] " Nicolas Dichtel
2017-01-13 10:46 ` [PATCH v3 4/8] x86: stop exporting msr-index.h to userland Nicolas Dichtel
2017-01-13 15:43 ` (no subject) David Howells
2008-01-16 18:38 Jed Davidow
2003-06-04 7:14 Compte centre de calcul UCP
2002-08-21 18:48 Eddie Johnson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3D802AB8.4000704@comedia.it \
--to=bluca@comedia.it \
--cc=linux-raid@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).