* Re: Adaptec 7XXX/DPT SmartRAID V
[not found] <334094430.20021030214559@wp.pl>
@ 2002-10-31 16:27 ` Warren Young
0 siblings, 0 replies; only message in thread
From: Warren Young @ 2002-10-31 16:27 UTC (permalink / raw)
To: Linux RAID Mailing List
gnu_is_not_unix wrote:
>
> I got one problem with this configuration. When I try to boot from "my
> self" compiled kernel (2.4.18), as first controller, linux recognize DPT,
> so my root partitions can not be mounted (can not find root fs etc./etc.).
Two solutions: 1) compile the Adaptec 2940 driver into the kernel, and
make the dpt_i2o driver a module. This should force the 2940 to be seen
first. 2) Make sure your scsi_adapter aliases are set up right in
/etc/modules.conf, and re-generate your initrd. They should set the
detection order.
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2002-10-31 16:27 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <334094430.20021030214559@wp.pl>
2002-10-31 16:27 ` Adaptec 7XXX/DPT SmartRAID V Warren Young
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).