From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Ben Edwards (lists)" Subject: Mounting NT Highpoint RAID disk Date: Wed, 12 May 2004 22:03:54 +0100 Sender: linux-raid-owner@vger.kernel.org Message-ID: <40A2913A.6070500@videonetwork.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Return-path: To: Linux RAID List List-Id: linux-raid.ids I have a Hidhpoint RAID array in my PC whitch is accesable from XP. I am trying to work out how to mount it with kernel 2.6.3. in /var/log/messages i haveApr 25 16:44:14 blue kernel: Highpoint HPT370 Softwareraid driver for linux version 0.01 Apr 25 16:44:14 blue kernel: No raid array found But there is a raid array. I have also included dmesg output below whitch lists ide3/4 and hde/f whitch I asume are the reaid drives. Any ideas? Regards, Ben ben@blue:~$ dmesg | grep hd ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:DMA ide2: BM-DMA at 0xa400-0xa407, BIOS settings: hde:DMA, hdf:DMA ide3: BM-DMA at 0xa408-0xa40f, BIOS settings: hdg:pio, hdh:pio hda: ST320410A, ATA DISK drive hdb: TOSHIBA ODD-DVD SD-M1802, ATAPI CD/DVD-ROM drive hdd: LITE-ON LTR-52327S, ATAPI CD/DVD-ROM drive hde: IC35L090AVV207-0, ATA DISK drive hdf: IC35L090AVV207-0, ATA DISK drive hda: max request size: 128KiB hda: 39102336 sectors (20020 MB) w/2048KiB Cache, CHS=38792/16/63 hda: hda1 hda2 hde: max request size: 1024KiB hde: 160836480 sectors (82348 MB) w/1821KiB Cache, CHS=16383/255/63 hde: hde1 hdf: max request size: 1024KiB hdf: 160836480 sectors (82348 MB) w/1821KiB Cache, CHS=16383/255/63 hdf: unknown partition table hdb: ATAPI 48X DVD-ROM drive, 512kB Cache hdd: ATAPI 52X CD-ROM CD-R/RW CD-MRW drive, 2048kB Cache Adding 730916k swap on /dev/hda1. Priority:-1 extents:1 EXT3 FS on hda2, internal journal