From mboxrd@z Thu Jan 1 00:00:00 1970 From: Clemens Schwaighofer Subject: Re: Kicking Non-Fresh From Array Date: Fri, 21 May 2004 17:48:41 +0900 Sender: linux-raid-owner@vger.kernel.org Message-ID: <40ADC269.4080902@tequila.co.jp> References: <40AD17C1.8010708@atella.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <40AD17C1.8010708@atella.com> To: Sevatio Cc: linux-raid@vger.kernel.org List-Id: linux-raid.ids -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Sevatio wrote: | I can't figure out how to get a partition into a Raid1 array. Syslog | tells me "kicking non-fresh hdc6 from array". Raidtab is set to assign | /dev/hda6 & /dev/hdc6 to /dev/md1: | | raiddev /dev/md1 | raid-level 1 | chunk-size 64k | persistent-superblock 1 | nr-raid-disks 2 | device /dev/hda6 | raid-disk 0 | device /dev/hdc6 | raid-disk 1 | | But mdstat only shows hda6 for md1. Also, I tried raidhotadd but it | doesn't show hdc6 as being active: | | md1 : active raid1 hdc6[1] hda6[0] | 6144704 blocks [1/1] [U] | | How do I fix this to get hdc6 to join md1? check what kind of partition is hdc6. I always use 'fd' [Linux raid auto] and it works fine for me. - -- Clemens Schwaighofer - IT Engineer & System Administration ========================================================== TEQUILA\Japan, 6-17-2 Ginza Chuo-ku, Tokyo 104-8167, JAPAN Tel: +81-(0)3-3545-7703 Fax: +81-(0)3-3545-7343 http://www.tequila.co.jp ========================================================== -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.4 (GNU/Linux) iD8DBQFArcJpjBz/yQjBxz8RAlYwAKDsj9l/HH7jBNCkpTrQCvhjWbKbIQCfak9C Ej7gv8Czwc/AxK3vguatffE= =9Jec -----END PGP SIGNATURE-----