* SATA chipset recomendations
@ 2004-06-09 1:12 chris
2004-06-09 4:41 ` John Lange
` (2 more replies)
0 siblings, 3 replies; 10+ messages in thread
From: chris @ 2004-06-09 1:12 UTC (permalink / raw)
To: linux-raid
I want to setup a Linux software RAID 1 / Mirror array in the 2.6 kernel. I
am looking for feedback regarding the best supported SATA chipsets. Do any
of these cards stick out as having better driver support? Can you reccommend
another card I have not mentioned?
(I am not wanting to spend the big bucks on hardware RAID, so I am not much
interested the expensive 3Ware or Adaptec cards)
Promise SATA150 TX4 ~ $65
(I don't really need 4 ports, but, I would not mind having them for future
use)
Highpoint Rocket 1520 ~ $35
Silicon Image Based Chipsets:
SIIG SC-SAT212 ~ $40
LSI MegaRAID SATA 150-2 ~ $35
Buslink PCI-2S ~ $30
Koutech PSA150 ~ $25
Kingwin SAC-02 ~ $20
I thank you for your time,
-chris
^ permalink raw reply [flat|nested] 10+ messages in thread* Re: SATA chipset recomendations
2004-06-09 1:12 SATA chipset recomendations chris
@ 2004-06-09 4:41 ` John Lange
2004-06-09 7:59 ` David Greaves
2004-06-09 7:08 ` Måns Rullgård
2004-06-09 8:44 ` Brad Campbell
2 siblings, 1 reply; 10+ messages in thread
From: John Lange @ 2004-06-09 4:41 UTC (permalink / raw)
To: chris; +Cc: LinuxRaid
There is only one place to go for current SATA answers:
http://www.linuxmafia.com/faq/Hardware/sata.html
John
On Tue, 2004-06-08 at 20:12, chris wrote:
> I want to setup a Linux software RAID 1 / Mirror array in the 2.6 kernel. I
> am looking for feedback regarding the best supported SATA chipsets. Do any
> of these cards stick out as having better driver support? Can you reccommend
> another card I have not mentioned?
>
> (I am not wanting to spend the big bucks on hardware RAID, so I am not much
> interested the expensive 3Ware or Adaptec cards)
>
> Promise SATA150 TX4 ~ $65
> (I don't really need 4 ports, but, I would not mind having them for future
> use)
>
> Highpoint Rocket 1520 ~ $35
>
> Silicon Image Based Chipsets:
> SIIG SC-SAT212 ~ $40
> LSI MegaRAID SATA 150-2 ~ $35
> Buslink PCI-2S ~ $30
> Koutech PSA150 ~ $25
> Kingwin SAC-02 ~ $20
>
> I thank you for your time,
> -chris
> -
> To unsubscribe from this list: send the line "unsubscribe linux-raid" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: SATA chipset recomendations
2004-06-09 4:41 ` John Lange
@ 2004-06-09 7:59 ` David Greaves
0 siblings, 0 replies; 10+ messages in thread
From: David Greaves @ 2004-06-09 7:59 UTC (permalink / raw)
To: John Lange; +Cc: chris, LinuxRaid
TMTOWTDI
and
http://marc.theaimsgroup.com/?l=linux-ide&m=108422797301151&w=2
is probably as close to the horses mouth as it gets ;)
David
John Lange wrote:
>There is only one place to go for current SATA answers:
>
>http://www.linuxmafia.com/faq/Hardware/sata.html
>
>John
>
>On Tue, 2004-06-08 at 20:12, chris wrote:
>
>
>>I want to setup a Linux software RAID 1 / Mirror array in the 2.6 kernel. I
>>am looking for feedback regarding the best supported SATA chipsets. Do any
>>of these cards stick out as having better driver support? Can you reccommend
>>another card I have not mentioned?
>>
>>(I am not wanting to spend the big bucks on hardware RAID, so I am not much
>>interested the expensive 3Ware or Adaptec cards)
>>
>>Promise SATA150 TX4 ~ $65
>>(I don't really need 4 ports, but, I would not mind having them for future
>>use)
>>
>>Highpoint Rocket 1520 ~ $35
>>
>>Silicon Image Based Chipsets:
>>SIIG SC-SAT212 ~ $40
>>LSI MegaRAID SATA 150-2 ~ $35
>>Buslink PCI-2S ~ $30
>>Koutech PSA150 ~ $25
>>Kingwin SAC-02 ~ $20
>>
>>I thank you for your time,
>>-chris
>>-
>>To unsubscribe from this list: send the line "unsubscribe linux-raid" in
>>the body of a message to majordomo@vger.kernel.org
>>More majordomo info at http://vger.kernel.org/majordomo-info.html
>>
>>
>
>
>-
>To unsubscribe from this list: send the line "unsubscribe linux-raid" in
>the body of a message to majordomo@vger.kernel.org
>More majordomo info at http://vger.kernel.org/majordomo-info.html
>
>
>
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: SATA chipset recomendations
2004-06-09 1:12 SATA chipset recomendations chris
2004-06-09 4:41 ` John Lange
@ 2004-06-09 7:08 ` Måns Rullgård
2004-06-09 10:33 ` Nick Maynard
2004-06-09 8:44 ` Brad Campbell
2 siblings, 1 reply; 10+ messages in thread
From: Måns Rullgård @ 2004-06-09 7:08 UTC (permalink / raw)
To: linux-raid
chris <linux_mail@rozpooh.com> writes:
> I want to setup a Linux software RAID 1 / Mirror array in the 2.6
> kernel. I am looking for feedback regarding the best supported SATA
> chipsets. Do any of these cards stick out as having better driver
> support? Can you reccommend another card I have not mentioned?
>
> (I am not wanting to spend the big bucks on hardware RAID, so I am not much
> interested the expensive 3Ware or Adaptec cards)
>
> Promise SATA150 TX4 ~ $65
> (I don't really need 4 ports, but, I would not mind having them for future
> use)
>
> Highpoint Rocket 1520 ~ $35
I'm using a Highpoint RocketRAID 1540 without any problems. There
have been reports on this list from others having strange problems
with Rocket 1540 (no fakeraid) cards. FWIW, my card is in a slightly
aging Alpha machine, which means that the BIOS on the card is pretty
much ignored.
--
Måns Rullgård
mru@kth.se
-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: SATA chipset recomendations
2004-06-09 7:08 ` Måns Rullgård
@ 2004-06-09 10:33 ` Nick Maynard
2004-06-09 10:56 ` David Greaves
2004-06-09 13:51 ` Lars Gaarden
0 siblings, 2 replies; 10+ messages in thread
From: Nick Maynard @ 2004-06-09 10:33 UTC (permalink / raw)
To: Måns Rullgård; +Cc: linux-raid
Måns Rullgård wrote:
> I'm using a Highpoint RocketRAID 1540 without any problems. There
> have been reports on this list from others having strange problems
> with Rocket 1540 (no fakeraid) cards. <snip>
Yup - that was me. The basic Rocket (not RocketRAID) 1540 card gave me /very/
serious problems with Linux. Really - don't play with it. I managed to get
mine RMA'd, but... blech.
The Promise TX4 SATA150, on the other hand, has been nothing but a pleasure to
work with. It's been recommended by many on this list in the past, and I will
now recommend it to you. Yes, it's more expensive, but you get what you pay
for.
Cheers,
--
Nick Maynard
nick.maynard@alumni.doc.ic.ac.uk
-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: SATA chipset recomendations
2004-06-09 10:33 ` Nick Maynard
@ 2004-06-09 10:56 ` David Greaves
2004-06-09 11:36 ` Måns Rullgård
2004-06-09 15:37 ` Marc Bevand
2004-06-09 13:51 ` Lars Gaarden
1 sibling, 2 replies; 10+ messages in thread
From: David Greaves @ 2004-06-09 10:56 UTC (permalink / raw)
To: linux-raid
Nick Maynard wrote:
>Måns Rullgård wrote:
>
>
>>I'm using a Highpoint RocketRAID 1540 without any problems. There
>>have been reports on this list from others having strange problems
>>with Rocket 1540 (no fakeraid) cards. <snip>
>>
>>
>Yup - that was me. The basic Rocket (not RocketRAID) 1540 card gave me /very/
>serious problems with Linux. Really - don't play with it. I managed to get
>mine RMA'd, but... blech.
>
>The Promise TX4 SATA150, on the other hand, has been nothing but a pleasure to
>work with. It's been recommended by many on this list in the past, and I will
>now recommend it to you. Yes, it's more expensive, but you get what you pay
>for.
>
>
I have one too - fairly happy (just having some raid5 resync issues but
I'm doing some diagnostics and I doubt it's the card) :)
I have wondered whether I'd have been better off with 2x Promise TX2s?
I don't know where the bottleneck is with 4xSATA disks on a single
Promise/PCI slot
Or is it a single pci bus in which case the TX4 is fine?
David
>Cheers,
>
>--
>
>Nick Maynard
>nick.maynard@alumni.doc.ic.ac.uk
>
>
You too :)
-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: SATA chipset recomendations
2004-06-09 10:56 ` David Greaves
@ 2004-06-09 11:36 ` Måns Rullgård
2004-06-09 15:37 ` Marc Bevand
1 sibling, 0 replies; 10+ messages in thread
From: Måns Rullgård @ 2004-06-09 11:36 UTC (permalink / raw)
To: linux-raid
David Greaves <david@dgreaves.com> writes:
> Nick Maynard wrote:
>
>>Måns Rullgård wrote:
>>
>>
>>>I'm using a Highpoint RocketRAID 1540 without any problems. There
>>>have been reports on this list from others having strange problems
>>>with Rocket 1540 (no fakeraid) cards. <snip>
>>>
>>>
>>Yup - that was me. The basic Rocket (not RocketRAID) 1540 card gave
>>me /very/ serious problems with Linux. Really - don't play with it.
>>I managed to get mine RMA'd, but... blech.
>>
>>The Promise TX4 SATA150, on the other hand, has been nothing but a
>>pleasure to work with. It's been recommended by many on this list
>>in the past, and I will now recommend it to you. Yes, it's more
>>expensive, but you get what you pay for.
>>
>>
> I have one too - fairly happy (just having some raid5 resync issues
> but I'm doing some diagnostics and I doubt it's the card) :)
>
> I have wondered whether I'd have been better off with 2x Promise TX2s?
> I don't know where the bottleneck is with 4xSATA disks on a single
> Promise/PCI slot
> Or is it a single pci bus in which case the TX4 is fine?
For PCI transfers all cards share the same bus, so one or two cards
should give the same total bandwidth.
The reason I stay away from Promise cards is that I only got trouble
when I bought an UltraTX2 aka pdc20268 in the days when it was new and
hot. It just would not work any faster than ata-33 without getting
numerous crc errors. Maybe it wasn't compatible with the Alpha
machine, I don't know.
--
Måns Rullgård
mru@kth.se
-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: SATA chipset recomendations
2004-06-09 10:56 ` David Greaves
2004-06-09 11:36 ` Måns Rullgård
@ 2004-06-09 15:37 ` Marc Bevand
1 sibling, 0 replies; 10+ messages in thread
From: Marc Bevand @ 2004-06-09 15:37 UTC (permalink / raw)
To: linux-raid
David Greaves wrote:
> I have wondered whether I'd have been better off with 2x Promise TX2s?
> I don't know where the bottleneck is with 4xSATA disks on a single
> Promise/PCI slot
I have 4 x Seagate 160GB SATA connected on a Promise SATA150 TX4. The
bottleneck is always the PCI bus:
o 66 MHz PCI bus (266 MB/s): I reach 209 MB/s (79% of theoretical bandwidth)
o 33 MHz PCI bus (133 MB/s): I reach 100 MB/s (75% of theoretical bandwidth)
Note: each disk is able to generate a datas rate of about 57 MB/s.
--
Marc Bevand http://www.epita.fr/~bevand_m
Computer Science School EPITA - System, Network and Security Dept.
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: SATA chipset recomendations
2004-06-09 10:33 ` Nick Maynard
2004-06-09 10:56 ` David Greaves
@ 2004-06-09 13:51 ` Lars Gaarden
1 sibling, 0 replies; 10+ messages in thread
From: Lars Gaarden @ 2004-06-09 13:51 UTC (permalink / raw)
To: linux-raid
Nick Maynard wrote:
> Måns Rullgård wrote:
>
>>I'm using a Highpoint RocketRAID 1540 without any problems. There
>>have been reports on this list from others having strange problems
>>with Rocket 1540 (no fakeraid) cards. <snip>
>
> Yup - that was me. The basic Rocket (not RocketRAID) 1540 card gave me /very/
> serious problems with Linux. Really - don't play with it. I managed to get
> mine RMA'd, but... blech.
Ditto. I didn't RMA my Rocket 1540. The only way I can make it work
properly
is to use a 2.4.x kernel, the hpt 'open source' driver and connect the
drive(s)
to the controller after the POST has finished.
--
LarsG
-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: SATA chipset recomendations
2004-06-09 1:12 SATA chipset recomendations chris
2004-06-09 4:41 ` John Lange
2004-06-09 7:08 ` Måns Rullgård
@ 2004-06-09 8:44 ` Brad Campbell
2 siblings, 0 replies; 10+ messages in thread
From: Brad Campbell @ 2004-06-09 8:44 UTC (permalink / raw)
To: chris; +Cc: linux-raid
chris wrote:
> I want to setup a Linux software RAID 1 / Mirror array in the 2.6 kernel. I
> am looking for feedback regarding the best supported SATA chipsets. Do any
> of these cards stick out as having better driver support? Can you reccommend
> another card I have not mentioned?
>
> (I am not wanting to spend the big bucks on hardware RAID, so I am not much
> interested the expensive 3Ware or Adaptec cards)
>
> Promise SATA150 TX4 ~ $65
> (I don't really need 4 ports, but, I would not mind having them for future
> use)
I have 3 of these in my server. They are great and I believe Promise supports Jeff with Specs and
Hardware. Support those that support linux!
I used them to replace 2 Highpoint RocketRaid 1540's which worked ok with the Highpoint supplied 2.4
driver but were flaky and limited to about 15MB/s under all 2.4 and 2.6 native drivers that I tried.
My ASUS A7V600 has onboard 2 Channel VIA SATA raid (with the BIOS disabled) and libata runs that
well too.
I also have a Cardbus SIL-3112 based card which works ok also.
I have to say I it's my belief that the Promise cards appear to be the best supported natively. They
would be my bet anyway. With 1 SATA150 and 3 drives I can max out the PCI bus easily, with 3 cards
and 10 drives it's out of the park.
Regards,
Brad
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2004-06-09 15:37 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-06-09 1:12 SATA chipset recomendations chris
2004-06-09 4:41 ` John Lange
2004-06-09 7:59 ` David Greaves
2004-06-09 7:08 ` Måns Rullgård
2004-06-09 10:33 ` Nick Maynard
2004-06-09 10:56 ` David Greaves
2004-06-09 11:36 ` Måns Rullgård
2004-06-09 15:37 ` Marc Bevand
2004-06-09 13:51 ` Lars Gaarden
2004-06-09 8:44 ` Brad Campbell
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).