From: Andre Correa <andre.correa@pobox.com>
To: linux-raid@vger.kernel.org
Subject: Trouble with a Adaptec 2010S RAID PCI adapter
Date: Tue, 15 Jun 2004 14:01:21 -0300 [thread overview]
Message-ID: <40CF2B61.4070104@pobox.com> (raw)
Hi list, I'm in trouble trying to use a Adaptec 2010S RAID PCI adapter
in a i386 linux box running kernel 2.6.6. I've enabled I2O in the kernel
and support for my SCSI adapter, that in fact works fine.
CONFIG_I2O=y
CONFIG_I2O_CONFIG=y
CONFIG_I2O_BLOCK=y
CONFIG_I2O_SCSI=y
CONFIG_I2O_PROC=y
My dmesg shows something like this:
...<snip>...
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
<Adaptec 2940 Ultra2 SCSI adapter>
aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs
...<snip>...
Red Hat/Adaptec aacraid driver (1.1.2-lk1 Jun 4 2004)
...<snip>...
I2O Core - (C) Copyright 1999 Red Hat Software
I2O: Event thread created as pid 20
i2o: Checking for PCI I2O controllers...
i2o: I2O controller on bus 4 at 16.
i2o: PCI I2O controller at FEBFC000 size=16384
i2o/iop0: Installed at IRQ0
i2o: 1 I2O controller found and installed.
Activating I2O controllers...
This may take a few minutes if there are many devices
Unable to obtain status of i2o/iop0, attempting a reset.
I2O configuration manager v 0.04.
(C) Copyright 1999 Red Hat Software
I2O Block Storage OSM v0.9
(c) Copyright 1999-2001 Red Hat Software.
i2o_block: Checking for Boot device...
i2o_block: Checking for I2O Block devices...
i2o_scsi.c: Version 0.1.2
chain_pool: 0 bytes @ f7d11f9c
(512 byte buffers X 4 can_queue X 0 i2o controllers)
It seens that the kernel has found the controoler. Then I headed to
http://i2o.shadowconnect.com/ - I2O on Linux Home and got their
raidutil package. But here starts the problem, even simple commands like
raidutil -L controller
gives me the error:
Engine connect failed: COMPATIBILITY number
osdIOrequest : File /dev/dpti17 Could Not Be Opened
Following the site info I have applied the following patchs to my kernel:
i2o-64-bit-fix.patch
i2o-adaptec-zerochannel-support.patch
i2o-config-clean.patch
i2o-makefile-cleanup.patch
i2o-pae-support.patch
i2o-passthru.patch
i2o_block-cleanup.patch
i2o_cmd_passthru-reorder.patch
i2o_config-checking-bugfix.patch
i2o_proc-full-seq_file.patch
i2o_proc-lct-access-bugfix.patch
with no luck. I've tried Adaptec's asmbe_linux_v1.23.006.tgz tools, but
aaccli cannot find the controller as well.
Does anybody experienced a problem like this before? I've found some
messages on mailling lists with the same error message, but no
solutions. I'm new to I2O. Am I missing something?
tks in advance for any help.
Andre
next reply other threads:[~2004-06-15 17:01 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-06-15 17:01 Andre Correa [this message]
-- strict thread matches above, loose matches on Subject: below --
2004-06-15 17:13 Trouble with a Adaptec 2010S RAID PCI adapter Salyzyn, Mark
2004-06-15 19:05 ` Andre Correa
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=40CF2B61.4070104@pobox.com \
--to=andre.correa@pobox.com \
--cc=linux-raid@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).