From mboxrd@z Thu Jan 1 00:00:00 1970 From: Andre Correa Subject: Trouble with a Adaptec 2010S RAID PCI adapter Date: Tue, 15 Jun 2004 14:01:21 -0300 Sender: linux-raid-owner@vger.kernel.org Message-ID: <40CF2B61.4070104@pobox.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Return-path: To: linux-raid@vger.kernel.org List-Id: linux-raid.ids Hi list, I'm in trouble trying to use a Adaptec 2010S RAID PCI adapter in a i386 linux box running kernel 2.6.6. I've enabled I2O in the kernel and support for my SCSI adapter, that in fact works fine. CONFIG_I2O=y CONFIG_I2O_CONFIG=y CONFIG_I2O_BLOCK=y CONFIG_I2O_SCSI=y CONFIG_I2O_PROC=y My dmesg shows something like this: ...... scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36 aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs ...... Red Hat/Adaptec aacraid driver (1.1.2-lk1 Jun 4 2004) ...... I2O Core - (C) Copyright 1999 Red Hat Software I2O: Event thread created as pid 20 i2o: Checking for PCI I2O controllers... i2o: I2O controller on bus 4 at 16. i2o: PCI I2O controller at FEBFC000 size=16384 i2o/iop0: Installed at IRQ0 i2o: 1 I2O controller found and installed. Activating I2O controllers... This may take a few minutes if there are many devices Unable to obtain status of i2o/iop0, attempting a reset. I2O configuration manager v 0.04. (C) Copyright 1999 Red Hat Software I2O Block Storage OSM v0.9 (c) Copyright 1999-2001 Red Hat Software. i2o_block: Checking for Boot device... i2o_block: Checking for I2O Block devices... i2o_scsi.c: Version 0.1.2 chain_pool: 0 bytes @ f7d11f9c (512 byte buffers X 4 can_queue X 0 i2o controllers) It seens that the kernel has found the controoler. Then I headed to http://i2o.shadowconnect.com/ - I2O on Linux Home and got their raidutil package. But here starts the problem, even simple commands like raidutil -L controller gives me the error: Engine connect failed: COMPATIBILITY number osdIOrequest : File /dev/dpti17 Could Not Be Opened Following the site info I have applied the following patchs to my kernel: i2o-64-bit-fix.patch i2o-adaptec-zerochannel-support.patch i2o-config-clean.patch i2o-makefile-cleanup.patch i2o-pae-support.patch i2o-passthru.patch i2o_block-cleanup.patch i2o_cmd_passthru-reorder.patch i2o_config-checking-bugfix.patch i2o_proc-full-seq_file.patch i2o_proc-lct-access-bugfix.patch with no luck. I've tried Adaptec's asmbe_linux_v1.23.006.tgz tools, but aaccli cannot find the controller as well. Does anybody experienced a problem like this before? I've found some messages on mailling lists with the same error message, but no solutions. I'm new to I2O. Am I missing something? tks in advance for any help. Andre