linux-raid.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Maurilio Longo <maurilio.longo@libero.it>
To: linux raid mailing list <linux-raid@vger.kernel.org>
Cc: NeilBrown <neilb@cse.unsw.edu.au>
Subject: Re: [PATCH md ] Fix up handling for read error in raid1.
Date: Mon, 12 Jul 2004 16:29:41 +0200	[thread overview]
Message-ID: <40F2A055.93DD9C4B@libero.it> (raw)
In-Reply-To: E1BdLyz-0001Jy-Tq@notabene.cse.unsw.edu.au

Neil,

do you have a similar patch for a 2.4.x (x == 20 in my case) kernel?

I can't change kernel easily since I use it to run mars-nwe which is a novell emulator
which is going to be removed from every distro I'm aware of :(

regards.


NeilBrown ha scritto:

> There is severe bit-rot in this code, which is to say that it doesn't work
> at all: an io error during read will do bad things.  It should work
> better with this patch.
>
> Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
>
> ### Diffstat output
>  ./drivers/md/raid1.c |   10 +++++++---
>  1 files changed, 7 insertions(+), 3 deletions(-)
>
> diff ./drivers/md/raid1.c~current~ ./drivers/md/raid1.c
> --- ./drivers/md/raid1.c~current~       2004-06-23 14:37:05.000000000 +1000
> +++ ./drivers/md/raid1.c        2004-06-23 14:37:13.000000000 +1000
> @@ -206,7 +206,7 @@ static int map(mddev_t *mddev, mdk_rdev_
>                         *rdevp = rdev;
>                         atomic_inc(&rdev->nr_pending);
>                         spin_unlock_irq(&conf->device_lock);
> -                       return 0;
> +                       return i;
>                 }
>         }
>         spin_unlock_irq(&conf->device_lock);
> @@ -945,18 +945,22 @@ static void raid1d(mddev_t *mddev)
>
>                 mddev = r1_bio->mddev;
>                 conf = mddev_to_conf(mddev);
> -               bio = r1_bio->master_bio;
>                 if (test_bit(R1BIO_IsSync, &r1_bio->state)) {
>                         sync_request_write(mddev, r1_bio);
>                         unplug = 1;
>                 } else {
> -                       if (map(mddev, &rdev) == -1) {
> +                       int disk;
> +                       bio = r1_bio->bios[r1_bio->read_disk];
> +                       if ((disk=map(mddev, &rdev)) == -1) {
>                                 printk(KERN_ALERT "raid1: %s: unrecoverable I/O"
>                                        " read error for block %llu\n",
>                                        bdevname(bio->bi_bdev,b),
>                                        (unsigned long long)r1_bio->sector);
>                                 raid_end_bio_io(r1_bio);
>                         } else {
> +                               r1_bio->bios[r1_bio->read_disk] = NULL;
> +                               r1_bio->read_disk = disk;
> +                               r1_bio->bios[r1_bio->read_disk] = bio;
>                                 printk(KERN_ERR "raid1: %s: redirecting sector %llu to"
>                                        " another mirror\n",
>                                        bdevname(rdev->bdev,b),
> -
> To unsubscribe from this list: send the line "unsubscribe linux-raid" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

--
 __________
|  |  | |__| md2520@mclink.it
|_|_|_|____|



  reply	other threads:[~2004-07-12 14:29 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20040624143619.5067.patches@notabene>
2004-06-24  4:37 ` [PATCH md ] Fix up handling for read error in raid1 NeilBrown
2004-07-12 14:29   ` Maurilio Longo [this message]
2004-07-23  2:56     ` Neil Brown
2004-07-23  7:26       ` Maurilio Longo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=40F2A055.93DD9C4B@libero.it \
    --to=maurilio.longo@libero.it \
    --cc=linux-raid@vger.kernel.org \
    --cc=neilb@cse.unsw.edu.au \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).