From: "Jaime Peñalba" <jpenalba@corenetworks.es>
To: linux-raid@vger.kernel.org
Cc: neilb@cse.unsw.edu.au
Subject: Multipath problems with 2.6.8.1
Date: Thu, 09 Sep 2004 17:32:35 +0200 [thread overview]
Message-ID: <41407793.3060105@corenetworks.es> (raw)
In-Reply-To: <S265098AbUIIOeH/20040909143407Z+1912@vger.kernel.org>
[-- Attachment #1: Type: text/plain, Size: 3067 bytes --]
Hi,
Im having some troubles with multipath on a 2.6.8.1 linux kernel.
Im using 2 QLogic 2344 connected to the SAN, i think that my problem is
related to superblocks, because when i create a new multipath device, it
writes the superblock for both disks and really is the same disk trought
two paths. I have else tried to disable persistent superblock, but mdadm
doesnt support multipath with the build mode.
Im doing it like this
1) Start the md
apache1:~/soft/mdadm-1.7.0# mdadm --create /dev/md0 --force --level
multipath --raid-devices=1 /dev/sdb1 --spare-devices=1 /dev/sdd1
mdadm: array /dev/md0 started.
apache1:~/soft/mdadm-1.7.0# cat /proc/mdstat
Personalities : [multipath]
md0 : active multipath sdd1[1] sdb1[0]
4882304 blocks [1/1] [U]
unused devices: <none>
This is ok and runs fine, But superblock is only at /dev/sdd1, so no
remount would be possible, or i think so...
apache1:~/soft/mdadm-1.7.0# mdadm -E /dev/sdb1
mdadm: No super block found on /dev/sdb1 (Expected magic a92b4efc, got
00000000)
apache1:~/soft/mdadm-1.7.0# mdadm -E /dev/sdd1
/dev/sdd1:
Magic : a92b4efc
Version : 00.90.00
UUID : af3395fd:fac2b820:2ca7083c:612864e0
Creation Time : Thu Sep 9 17:20:43 2004
Raid Level : multipath
Device Size : 4882304 (4.66 GiB 5.00 GB)
Raid Devices : 1
Total Devices : 2
Preferred Minor : 0
Update Time : Thu Sep 9 17:20:43 2004
State : dirty
Active Devices : 1
Working Devices : 2
Failed Devices : 0
Spare Devices : 1
Checksum : 63bc7489 - correct
Events : 0.36
Number Major Minor RaidDevice State
this 1 8 49 1 spare /dev/sdd1
0 0 8 17 0 active sync /dev/sdb1
1 1 8 49 1 spare /dev/sdd1
2) Stop the md
apache1:~/soft/mdadm-1.7.0# mdadm -S /dev/md0
3) Start the md again
apache1:~/soft/mdadm-1.7.0# mdadm --assemble /dev/md0
--uuid=af3395fd:fac2b820:2ca7083c:612864e0 /dev/sdb1 /dev/sdd1
mdadm: no RAID superblock on /dev/sdb1
mdadm: /dev/sdb1 has wrong uuid.
mdadm: /dev/md0 has been started with 1 drive.
apache1:~/soft/mdadm-1.7.0# cat /proc/mdstat
Personalities : [multipath]
md0 : active multipath sdd1[0]
4882304 blocks [1/1] [U]
unused devices: <none>
Now things arent working very well....
apache1:~/soft/mdadm-1.7.0# mdadm --detail /dev/md0
/dev/md0:
Version : 00.90.01
Creation Time : Thu Sep 9 17:20:43 2004
Raid Level : multipath
Array Size : 4882304 (4.66 GiB 5.00 GB)
Raid Devices : 1
Total Devices : 1
Preferred Minor : 0
Persistence : Superblock is persistent
Update Time : Thu Sep 9 17:26:21 2004
State : clean
Active Devices : 1
Working Devices : 1
Failed Devices : 0
Spare Devices : 0
Number Major Minor RaidDevice State
0 8 49 0 active sync /dev/sdd1
UUID : af3395fd:fac2b820:2ca7083c:612864e0
Events : 0.37
I would appreciate very much any help with this.
Thanks,
Jaime.
[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/x-pkcs7-signature, Size: 3936 bytes --]
next parent reply other threads:[~2004-09-09 15:32 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <S265098AbUIIOeH/20040909143407Z+1912@vger.kernel.org>
2004-09-09 15:32 ` Jaime Peñalba [this message]
2004-09-09 15:59 ` Multipath problems with 2.6.8.1 Guy
2004-09-09 18:25 ` Jaime Peñalba
2004-09-09 16:05 ` Jaime Peñalba
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=41407793.3060105@corenetworks.es \
--to=jpenalba@corenetworks.es \
--cc=linux-raid@vger.kernel.org \
--cc=neilb@cse.unsw.edu.au \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).