Re: Looking for the cause of poor I/O performance - a test script

[David Greaves <david@dgreaves.com>]

I hacked up a quick script to test permutations of readahead - it's not 
exactly bonnie+++ but it may be useful.
I wish I'd bothered with mdadm stripe sizes too - but the array is 
pretty full now and I'll live with what it delivers.

Essentially I found the best performance on *my* system with all low 
level devices and the md device set to a 0 readahead and the lvm device 
set to 4096.
I'm only interested in video streaming big (1+Gb) files. Your needs (and 
hence test) may differ.

my system is 2.6.10-rc2, xfs, lvm2, raid5, sata disks.

cc'ed the lvm group since this often seems to come up in conjunction 
with you guys :)

For your entertainment...

#!/bin/bash
RAW_DEVS="/dev/sda /dev/sdb /dev/sdc /dev/sdd /dev/sde /dev/sdf /dev/hdb"
MD_DEVS=/dev/md0
LV_DEVS=/dev/huge_vg/huge_lv

LV_RAS="0 128 256 1024 4096 8192"
MD_RAS="0 128 256 1024 4096 8192"
RAW_RAS="0 128 256 1024 4096 8192"

function show_ra()
{
for i in $RAW_DEVS $MD_DEVS $LV_DEVS
 do echo -n "$i `blockdev --getra $i`  ::  "
done
echo
}

function set_ra()
{
  RA=$1
  shift
  for dev in $@
  do
    blockdev --setra $RA $dev
  done
}

function show_performance()
{
  COUNT=4000000
  dd if=/dev/huge_vg/huge_lv of=/dev/null count=$COUNT 2>&1 | grep seconds
}

for RAW_RA in $RAW_RAS
  do
  set_ra $RAW_RA $RAW_DEVS
  for MD_RA in $MD_RAS
    do
    set_ra $MD_RA $MD_DEVS
    for LV_RA in $LV_RAS
      do
      set_ra $LV_RA $LV_DEVS
      show_ra
      show_performance
      done
    done
  done

_______________________________________________
linux-lvm mailing list
linux-lvm@redhat.com
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/