Re: no auto detection of software raid 5 on boot

[wimpunk <wim-raid@tisnix.be>]

I'm not running fedora so I can't tell exactly where you have to change 
it.  It looks like the raid module is build-in the kernel but your scsi 
driver isn't.  You'll have to get a new kernel: either with both drivers 
build in or you can load both drivers from your initrd.

wim.

google@familycook1.net wrote:
> Thank you for your very fast responce.
> 
> Can you point me in the right direction on where I can change the order of
> driver installs.  I am guessing rc.sysinit, but I am not sure.
> 
> thank you
> donald
> 
> 
> Quoting wimpunk <wim-raid@tisnix.be>:
> 
> 
>>You're trying to detect the raid before the scsi driver gets loaded.
>>
>>wim.
>>
>>google@familycook1.net wrote:
>>
>>>I am having a problem with auto detection of software raid 5.
>>>
>>>I can set up the the raid device, mkfs.ex3, and mount the disk; but at
>>
>>reboot
>>
>>>the raid device is not auto decteced.  After the system comes up I can do a
>>>mdadm -A and the raid will assemble and then I can mount it.
>>>
>>>One interesting note.  I am trying to get the raid system to work on Fedora
>>
>>core
>>
>>>2.  But if I boot a Fedora core 3 rescue CD, the raid gets auto detected.
>>>
>>>Any help would be very much appreciated.
>>>
> 
>