linux-raid.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sven Anders <anders@anduras.de>
To: linux-raid@vger.kernel.org
Cc: Markus Gehring <markus.gehring@infinia.de>
Subject: Re: RAID1 Corruption
Date: Mon, 17 Jan 2005 20:21:45 +0100	[thread overview]
Message-ID: <41EC1049.8000209@anduras.de> (raw)
In-Reply-To: <41EC0371.9060106@infinia.de>

[-- Attachment #1: Type: text/plain, Size: 2127 bytes --]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Markus Gehring wrote:
| Hi Folks!
|
| I have a reproducable problem with corrupted data read from a RAID1-array.
|
| Everything works fine with only one drive in the array. If the second is
| synced up read accesses return corrupted data.
|
| Interesting: If you remove again the second disk. The same files will be
|  read correctly again (no matter if written while only one disk is in
| the array or two are synced!)!
|
| Tests with differend disks (2x80GB Seagate and 2x160GB Samsung),
| different partition sizes (20, 40, 80, 160GB), different filesytems
| (ext3, ext2, reiser) showed the same results.
|
| If i use the drive without raid everything works fine.

It's seems to be the same problem I have (see my posting from 5.1.2005
on this mailing-list).

The problem was reproducable. I changed to ext2, but problem persists.
I tried several kernel configurations (with a special extra-small
configuration, which had only the absolute necessary turned on), but
it had no effect (It only took longer to reproduce the problem).
I tried the kernels 2.6.9 with and without the -ac patches, wth no
success at all.

Because I'm not at home till 29.01., I could not run any tests at the
moment, but the problem seem to be the same. The seems to be no problem
with the 2.4 kernel series.

Any ideas?

Regards
~ Sven

- --
~ Sven Anders <anders@anduras.de>                 () Ascii Ribbon Campaign
~                                                 /\ Support plain text e-mail
~ ANDURAS service solutions AG
~ Innstraße 71 - 94036 Passau - Germany
~ Web: www.anduras.de - Tel: +49 (0)851-4 90 50-0 - Fax: +49 (0)851-4 90 50-55

Rechtsform: Aktiengesellschaft - Sitz: Passau - Amtsgericht Passau HRB 6032
Mitglieder des Vorstands: Sven Anders, Marcus Junker, Michael Schön
Vorsitzender des Aufsichtsrats: Dipl. Kfm. Thomas Träger
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.5 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org

iD8DBQFB7BBI5lKZ7Feg4EcRAukBAKCewS2zwYERnzfojr/W1K3F3Y7bAACfUuXP
ulBaaE5BGl9nKu16tpLCLm8=
=xh5T
-----END PGP SIGNATURE-----

[-- Attachment #2: anders.vcf --]
[-- Type: text/x-vcard, Size: 339 bytes --]

begin:vcard
fn:Sven Anders
n:Anders;Sven
org:ANDURAS AG;Research and Development
adr;quoted-printable:;;Innstra=C3=9Fe 71;Passau;Bavaria;94036;Germany
email;internet:anders@anduras.de
title:Dipl. Inf.
tel;work:++49 (0)851 / 490 50 - 0
tel;fax:+49 (0)851 / 4 90 50 - 55
x-mozilla-html:FALSE
url:http://www.anduras.de
version:2.1
end:vcard


  parent reply	other threads:[~2005-01-17 19:21 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2005-01-17 15:22 RAID1 & 2.6.9 performance problem Janusz Zamecki
2005-01-17 15:39 ` Gordon Henderson
2005-01-17 15:51   ` Hans Kristian Rosbach
2005-01-17 16:46     ` Peter T. Breuer
2005-01-18 13:18       ` Hans Kristian Rosbach
2005-01-18 13:43         ` Peter T. Breuer
2005-01-17 20:49     ` Janusz Zamecki
2005-01-17 16:24   ` Andrew Walrond
2005-01-17 16:51     ` Is this hdparm -t output correct? (was Re: RAID1 & 2.6.9 performance problem) Andy Smith
2005-01-17 17:04       ` Andrew Walrond
2005-01-17 18:26         ` RAID1 Corruption Markus Gehring
2005-01-17 19:14           ` Paul Clements
2005-01-17 19:35             ` Tony Mantler
2005-01-17 19:42             ` Markus Gehring
2005-01-17 19:21           ` Sven Anders [this message]
2005-01-18 17:32 ` RAID1 & 2.6.9 performance problem J. Ryan Earl
2005-01-18 17:34   ` J. Ryan Earl
2005-01-18 18:41     ` Janusz Zamecki
2005-01-18 19:18       ` J. Ryan Earl
2005-01-18 19:34         ` Janusz Zamecki
2005-01-18 19:12   ` Janusz Zamecki

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=41EC1049.8000209@anduras.de \
    --to=anders@anduras.de \
    --cc=linux-raid@vger.kernel.org \
    --cc=markus.gehring@infinia.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).