linux-raid.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Peter Evertz" <leo2@pec.homeip.net>
To: linux-raid@vger.kernel.org
Subject: Spare disk could not sleep / standby
Date: Tue, 08 Mar 2005 05:05:01 +0100	[thread overview]
Message-ID: <422D327D.11718.F8DB3@localhost> (raw)

I have 2 Raid5 arrays on a hpt375. Each has a (unused) spare disk. 
With change from 2.4 to 2.6 I can not put the spare disk to sleep or  

standby. 
It wakes up after some seconds. 
/proc/diskstat shows activities every 2 to 5 seconds. 
It is a problem of the plain kernel driver ( not application ) 
because 
if i raidhotremove the drives it can sleep/standby and no activities 
are 
shown in /proc/diskstats. 
If the whole Array is unmounted, there are no activities an all 
drives. 
It seems that access to md always causes an access at the spare disk 
?! 

Any hints ? Anyone with the same problem ? 

Regards 
Peter Evertz  

(Sorry: If this is a dup.)

Linux pec6 2.6.8-24.11-default #1 Fri Jan 14 13:01:26 UTC 2005 i686 
i686  
i386 GNU/Linux  

Output of ver_linux:  

Gnu C                  3.3.4 
Gnu make               3.80 
binutils               2.15.91.0.2 
util-linux             2.12c 
mount                  2.12c 
module-init-tools      3.1-pre5 
e2fsprogs              1.35 
jfsutils               1.1.7 
reiserfsprogs          3.6.18 
reiser4progs           line 
xfsprogs               2.6.13 
PPP                    2.4.2 
isdn4k-utils           3.5 
nfs-utils              1.0.6 
Linux C Library        x  1 root root 1359489 Oct  2 02:30  
/lib/tls/libc.so.6 
Dynamic linker (ldd)   2.3.3 
Linux C++ Library      5.0.7 
Procps                 3.2.3 
Net-tools              1.60 
Kbd                    1.12 
Sh-utils               5.2.1 
Modules Loaded         speedstep_lib freq_table thermal processor fan 
button  
battery ac nvram nfsd exportfs pppoe pppox ipt_TOS ip6t_LOG 
ip6t_limit  
ipt_LOG ipt_limit ipt_TCPMSS ipt_MASQUERADE usbserial ipt_pkttype 
parport_pc  
lp parport eeprom w83781d i2c_sensor i2c_i801 af_packet ppp_generic  
ip6t_state ip6_conntrack ipt_state ip6t_REJECT ipt_REJECT 
iptable_mangle  
iptable_filter ip6table_mangle ip_nat_ftp iptable_nat 
ip_conntrack_ftp  
ip_conntrack ip_tables ip6table_filter ip6_tables ipv6 hisax 
crc_ccitt isdn  
slhc edd usbhid skystar2 dvb_core i2c_core ohci_hcd evdev joydev sg 
st  
sr_mod ide_cd cdrom ehci_hcd uhci_hcd intel_agp agpgart hw_random 
dm_mod  
natsemi usbcore bcm5700 raid5 xor ext3 jbd sd_mod scsi_mod  

proc/version: 
Linux version 2.6.8-24.11-default (geeko@buildhost) (gcc version 
3.3.4 (pre  
3.3.5 20040809)) #1 Fri Jan 14 13:01:26 UTC 2005  



             reply	other threads:[~2005-03-08  4:05 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2005-03-08  4:05 Peter Evertz [this message]
2005-03-08  4:14 ` Spare disk could not sleep / standby Guy
2005-03-08  4:40   ` Neil Brown
2005-03-08  5:20     ` Molle Bestefich
2005-03-08  5:36       ` Neil Brown
2005-03-08  5:46         ` Molle Bestefich
2005-03-08  6:03           ` Neil Brown
2005-03-08  6:24             ` Molle Bestefich
     [not found]               ` <422D625C.5020803@medien.uni-weimar.de>
2005-03-08  8:57                 ` Molle Bestefich
2005-03-08 10:51                   ` Tobias Hofmann
2005-03-08 13:13                     ` Gordon Henderson
2005-03-09  5:11                       ` Brad Campbell
2005-03-09  9:03                       ` Tobias Hofmann
2005-03-08  8:51         ` David Greaves
2005-03-08 15:59     ` Mike Tran
2005-03-09 15:53     ` Spare disk could not sleep / standby [probably dangerous PATCH] Peter Evertz
2005-03-09 10:44       ` Mike Tran
2005-03-09 20:05         ` Peter Evertz
2005-03-09 16:29           ` Mike Tran
2005-03-09 23:20             ` Peter Evertz

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=422D327D.11718.F8DB3@localhost \
    --to=leo2@pec.homeip.net \
    --cc=linux-raid@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).