* RAID0+1
@ 2005-03-16 19:23 Arshavir Grigorian
2005-03-16 20:31 ` RAID0+1 Arshavir Grigorian
0 siblings, 1 reply; 2+ messages in thread
From: Arshavir Grigorian @ 2005-03-16 19:23 UTC (permalink / raw)
To: linux-raid
Hi,
I have a RAID1+0 array. During boot time, RAID1 arrays get correctly
detected and activated. But RAID0 fails to come up. I am guessing the
reason the RAID0 cannot be autodetected is that it's built on other md
devices and not a physical disk. Anyone knows how to get around this?
I am using Debian Sarge with mdadm -v1.9.0 running a custom compiled
2.4.27 kernel.
TIA.
--
Arshavir Grigorian
Systems Administrator/Engineer
M-CAM, Inc.
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: RAID0+1
2005-03-16 19:23 RAID0+1 Arshavir Grigorian
@ 2005-03-16 20:31 ` Arshavir Grigorian
0 siblings, 0 replies; 2+ messages in thread
From: Arshavir Grigorian @ 2005-03-16 20:31 UTC (permalink / raw)
Cc: linux-raid
Arshavir Grigorian wrote:
> Hi,
>
> I have a RAID1+0 array. During boot time, RAID1 arrays get correctly
> detected and activated. But RAID0 fails to come up. I am guessing the
> reason the RAID0 cannot be autodetected is that it's built on other md
> devices and not a physical disk. Anyone knows how to get around this?
>
> I am using Debian Sarge with mdadm -v1.9.0 running a custom compiled
> 2.4.27 kernel.
Fixed. The RAID1 devices need to be listed in mdadm.conf as DEVICES in
addition to the physical disks/partitions.
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2005-03-16 20:31 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-03-16 19:23 RAID0+1 Arshavir Grigorian
2005-03-16 20:31 ` RAID0+1 Arshavir Grigorian
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).