linux-raid.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [Fwd: Re: [Evms-devel] md raid5 expand possible yet?]
@ 2005-04-04  8:07 David Greaves
  0 siblings, 0 replies; only message in thread
From: David Greaves @ 2005-04-04  8:07 UTC (permalink / raw)
  To: linux-raid

This is just a potentially interesting forwarded mail from the EVMS 
mailing list to illustrate the kind of issues/responses to the raid5 
resize questions...

David

>
> osni@kiruna.se wrote on 03/01/2005 09:16:51 AM:
>
>> I read in the evms user guide that it should be possible but I can't
>> seem
>> to find where to "add one object to the region". I'm using evms 2.5.2
>> gui...
>>
>> /Oscar
>
> Hi, Oscar.
>
> If you are using evmsn or evmsgui you have to start the expand on the top
> level volume, object, or container that consumes the raid5 region.  For
> example, if raid5 region md/md1 is made into EVMS volume /dev/evms/mydata,
> then you would start by expanding /dev/evms/mydata.  The UI will ask you
> for an "expansion point" which is the object in the volume's stack that
> you
> want to expand.  You should see md/md1 in the list of possible expansion
> points provided there is a free object with enough space that can be added
> to the array.  Select the md/md1 regino to exapnd.  You should then get a
> prompt for the object to be added to md/md1.
>
> Similarly, if md/md1 is consumed by an LVM container you would start by
> expanding the LVM container.  That operation, too, should give you a list
> of possible expansion points.  In this case you will usually see two
> expansion points -- one for the container (you can expand a container by
> adding another object to it) and one for the raid5 region.
>
> If you are using the "evms" command line interface (CLI) you can use a
> command like "expand:md/md1,sdc5".  (I haven't tested that command.  I
> wrote it based on the help.)
>
> Steve D.
>
>
Hi again and thanks for the answer.

It's resizeing now so I hope it works :) But someone should change in the
user guide where it says
"Like RAID-0, RAID-4/5 regions must be deactivated before they are resized."
That was the reason to why I couln't get it to work at first, if it's not
active it can't be resized.

/Oscar



^ permalink raw reply	[flat|nested] only message in thread

only message in thread, other threads:[~2005-04-04  8:07 UTC | newest]

Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-04-04  8:07 [Fwd: Re: [Evms-devel] md raid5 expand possible yet?] David Greaves

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).