From mboxrd@z Thu Jan  1 00:00:00 1970
From: John McMonagle <johnm@advocap.org>
Subject: Procedure to grow raid1
Date: Tue, 24 May 2005 12:12:20 -0500
Message-ID: <42936074.9030007@advocap.org>
Mime-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
Return-path: <linux-raid-owner@vger.kernel.org>
Sender: linux-raid-owner@vger.kernel.org
To: linux-raid@vger.kernel.org
List-Id: linux-raid.ids

Planning on putting in larger drives in my raid 1 backup server.
I think I know what to do but as it requires a bit of a drive I want to 
do it right the first time :)

Currently have 2 200gb sata drives.
Changing to 300gb drives.

cat /proc/mdstat
Personalities : [raid1] [raid5]
md0 : active raid1 sda1[0] sdb1[2]
      586240 blocks [3/2] [U_U]

md2 : active raid1 sda2[0] sdb2[1]
      194771968 blocks [3/2] [UU_]

md0  is /
md2 is rest of drives and lvm2

Shutdown replace sdb with 300gb drive.

fdisk making a  sdb1 a little larger and sdb2 the remainder of drive. 
both type fd.

mdadm /dev/md0 -a /dev/sdb1
mdadm /dev/md2 -a /dev/sdb2

Go for long lunch ;-)

put grub on /dev/sdb

Shutdown  replace  /dev/sda with 300g drive.

Boot or do what is required to get it to boot.

mdadm /dev/md0 --grow --size=max
mdadm /dev/md0 --grow --size=max

Boot from rescue cd

resize2fs /dev/md0

reboot
Next comes the part that scares me :(
Need to extend the lvm pv.
My guess I run vgcfgbackup

Edit the dump

# Generated by LVM2: Tue May 24 11:41:45 2005

contents = "Text Format Volume Group"
version = 1

description = "Created *after* executing 'vgcfgbackup'"

creation_host = "fonbackup"     # Linux fonbackup 2.6.11-p4smp #1 SMP Tue Apr 19 14:45:37 C
DT 2005 i686
creation_time = 1116952905      # Tue May 24 11:41:45 2005

vg1 {
        id = "KB6h2q-yCFm-EOyx-HDWe-ToIK-Fy72-UEg4US"
        seqno = 8
        status = ["RESIZEABLE", "READ", "WRITE"]
        extent_size = 8192              # 4 Megabytes
        max_lv = 0
        max_pv = 0

        physical_volumes {

                pv0 {
                        id = "e4GFl5-ri5o-ezD0-bKpl-b8fU-s4RO-Cqz5br"
                        device = "/dev/md2"     # Hint only

                        status = ["ALLOCATABLE"]
                        pe_start = 384
                        pe_count = 47551        # 185.746 Gigabytes
                }
        }
.......... more stuff.................

I figure the trick is to enter the correct value for pe_count
Figure it's in 512 byte sectors.

On the current drives
blockdev --getsize /dev/sda2
389544120
389544120/8192= 47551.772460938  

So should take the number of blocks divide by 8192 and use that.

Then run vgcfgrestore.

Any thing I should do to make sure it is all correct?

Then partition and add the second drive.

Thanks

John