From: Don Feliciano <don.feliciano@runbox.com>
To: linux-raid@vger.kernel.org
Subject: kernel panic reading root disk (s/w raid0)
Date: Wed, 02 Nov 2005 22:02:55 -0500 [thread overview]
Message-ID: <43697DDF.1070003@runbox.com> (raw)
The error: sh-2006: read_super_block: bread failed (dev md0, block2,
size 4096)
My config works fine with kernel 2.6.12. 2.6.13 (I've tried everything
from make oldconfig to a complete
make xconfig walk-through) panics with error above no matter how I
compile it.
Could I really have a bad superblock? Why would my 2.6.12 work if that
were the case? Also, I tried replacing mdadm.conf with output of mdadm
--detail -s Doing so caused 2.6.12 to fail, too (though on md5 not md0,
so I could boot single user)
My distro is Gentoo. Any help appreciated! (I want to follow ~stable)
/boot/grub/grub.conf (relevant portion):
title=Gentoo Linux 2.6.12-r10
root (hd0,0)
kernel /kernel-2.6.12-gentoo-r10 ro root=/dev/md0
/etc/fstab (relevant portion):
/dev/md0 / reiserfs noatime 1 1
/dev/sda1 /boot ext2 noauto,noatime 1 2
/dev/md1 /usr reiserfs noatime 1 2
/dev/md2 /var reiserfs noatime,notail 1 2
/dev/md3 /tmp reiserfs noatime,notail 1 2
/dev/md4 /export reiserfs noatime,notail 1 2
/dev/md5 /opt reiserfs noatime 1 2
/dev/md6 /fs0 reiserfs noatime,notail 1 2
/dev/sda10 none swap sw,pri=1 0 0
/dev/sdb10 none swap sw,pri=1 0 0
/etc/mdadm.conf:
DEVICE /dev/sda5 /dev/sdb5
DEVICE /dev/sda6 /dev/sdb6
DEVICE /dev/sda7 /dev/sdb7
DEVICE /dev/sda8 /dev/sdb8
DEVICE /dev/sda9 /dev/sdb9
DEVICE /dev/sda11 /dev/sdb11
DEVICE /dev/sda12 /dev/sdb12
ARRAY /dev/md0 devices=/dev/sda5,/dev/sdb5
ARRAY /dev/md1 devices=/dev/sda6,/dev/sdb6
ARRAY /dev/md2 devices=/dev/sda7,/dev/sdb7
ARRAY /dev/md3 devices=/dev/sda8,/dev/sdb8
ARRAY /dev/md4 devices=/dev/sda9,/dev/sdb9
ARRAY /dev/md5 devices=/dev/sda11,/dev/sdb11
ARRAY /dev/md6 devices=/dev/sda12,/dev/sdb12
reply other threads:[~2005-11-03 3:02 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=43697DDF.1070003@runbox.com \
--to=don.feliciano@runbox.com \
--cc=donf.lists@runbox.com \
--cc=linux-raid@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).