From mboxrd@z Thu Jan 1 00:00:00 1970 From: Christopher Smith Subject: Problems with multiple Promise SATA150 TX4 cards Date: Tue, 24 Jan 2006 13:01:51 +1100 Message-ID: <43D58A8F.6040907@nighthawkrad.net> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Return-path: Sender: linux-raid-owner@vger.kernel.org To: linux-raid@vger.kernel.org List-Id: linux-raid.ids This is probably not entirely the right list for this query, but I figure there's enough people here who have experience in the right places and have probably tried this sort of thing themselves. Apologies to anyone whose time I waste. Or, at the very least, I'm sure someone here can point me in the right direction :). I currently have a machine with two Promise SATA150 TX4 cards (PDC20318, http://www.promise.com/product/product_detail_eng.asp?segment=undefined&product_id=98#) and a 4-drive RAID5 array attached to each. Since I was nearly out of space, I decided it was time to add another 4 drives and expand again. So, I bought another TX4 card and another 4 SATA drives and plonked them in the machine, thinking it would be as easy as the last time I did it (going from 4 to 8 drives). The first problem is that the Promise cards' onboard BIOS(es) only recognise(s) (or, at least, list) 8 of the 12 drives in the machine at boot. However, once Linux has booted it detects all three cards and all twelve drives, so this is a relatively insignificant issue. The second (major) problem is whenever I try to access drives attached to the "first" controller (ie: /dev/sd[abcd], I get ATA timeout errors like these: ata3: status=0x51 { DriveReady SeekComplete Error } ata3: error=0x0c { DriveStatusError } ata3: status=0x51 { DriveReady SeekComplete Error } ata3: error=0x0c { DriveStatusError } ata2: status=0x51 { DriveReady SeekComplete Error } ata2: error=0x0c { DriveStatusError } ata2: status=0x51 { DriveReady SeekComplete Error } ata2: error=0x0c { DriveStatusError } This _only_ happens when accessing drives attached to the "first" controller. I can have 8 simultaneous 'dd if=/dev/sdX of=/dev/null' happening to the other 8 drives for minutes at a time without a problem, but as soon as I fire up a dd to /dev/sd[abcd], I get the errors listed above within seconds. Additionally, a dd to only /dev/sd[abcd] with no other system activity also produces the errors - again within seconds. I have shuffled the cards,cables and physical drives around to determine that this is not a problem with any of them individually - no matter the combination, it only ever happens to drives that are at sd[abcd] (ie: if I rejig the hardware so the drive at /dev/sdh, which was working fine, is on a different cable and controller, but appears at /dev/sdb, it will produce the errors). Removing cards so there are only one or two in the system results in no errors. Similarly, I tried shuffling the hardware around to verify that no individual card, cable or drive was responsible. The errors _only_ occur with three cards in the system, _only_ with whichever drives are attached to the "first" controller (ie: sd[abcd]) and _regardless_ of other system activity. I'm trying to locate where the problem is so I can suggest to the right people that they fix it :). Any suggestions people might have that could possibly workaround (PCI timings ?) or further contacts will be gratefully accepted and tried. Cheers, CS PS: Here are the outputs of 'dmesg' and 'lspci -vvv' for my system: dmesg: [root@terminus ~]# dmesg Linux version 2.6.14-1.1656_FC4smp (bhcompile@tweety.build.redhat.com) (gcc version 4.0.2 20051125 (Red Hat 4.0.2-8)) #1 SMP Thu Jan 5 22:24:06 EST 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009d800 (usable) BIOS-e820: 000000000009d800 - 000000000009f800 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007fff0000 (usable) BIOS-e820: 000000007fff0000 - 000000007ffff000 (ACPI data) BIOS-e820: 000000007ffff000 - 0000000080000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) 1151MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000ff780 Using x86 segment limits to approximate NX protection On node 0 totalpages: 524272 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 225280 pages, LIFO batch:31 HighMem zone: 294896 pages, LIFO batch:31 DMI 2.3 present. Using APIC driver default ACPI: RSDP (v000 ACPIAM ) @ 0x000f62f0 ACPI: RSDT (v001 A M I OEMRSDT 0x01000412 MSFT 0x00000097) @ 0x7fff0000 ACPI: FADT (v001 A M I OEMFACP 0x01000412 MSFT 0x00000097) @ 0x7fff0200 ACPI: MADT (v001 A M I OEMAPIC 0x01000412 MSFT 0x00000097) @ 0x7fff0300 ACPI: OEMB (v001 A M I OEMBIOS 0x01000412 MSFT 0x00000097) @ 0x7ffff040 ACPI: DSDT (v001 0AAYB 0AAYB007 0x00000007 MSFT 0x0100000d) @ 0x00000000 ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:2 APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] enabled) Processor #6 15:2 APIC version 20 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) Processor #1 15:2 APIC version 20 ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] enabled) Processor #7 15:2 APIC version 20 ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24]) IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 24-47 ACPI: IOAPIC (id[0x0a] address[0xfec80400] gsi_base[48]) IOAPIC[2]: apic_id 10, version 32, address 0xfec80400, GSI 48-71 ACPI: IOAPIC (id[0x0b] address[0xfec81000] gsi_base[72]) IOAPIC[3]: apic_id 11, version 32, address 0xfec81000, GSI 72-95 ACPI: IOAPIC (id[0x0c] address[0xfec81400] gsi_base[96]) IOAPIC[4]: apic_id 12, version 32, address 0xfec81400, GSI 96-119 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 5 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000) Built 1 zonelists Kernel command line: ro root=/dev/vg_data/lv_root console=tty0 console=ttyS0,115200 mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) mapped IOAPIC to ffffb000 (fec80000) mapped IOAPIC to ffffa000 (fec80400) mapped IOAPIC to ffff9000 (fec81000) mapped IOAPIC to ffff8000 (fec81400) Initializing CPU#0 CPU 0 irqstacks, hard=c0448000 soft=c0428000 PID hash table entries: 4096 (order: 12, 65536 bytes) Detected 2791.076 MHz processor. Using pmtmr for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 2071596k/2097088k available (2167k kernel code, 24188k reserved, 814k data, 224k init, 1179584k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 5587.77 BogoMIPS (lpj=11175541) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 0 CPU: After all inits, caps: bfebf3ff 00000000 00000000 00000080 00004400 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU0: Intel P4/Xeon Extended MCE MSRs (12) available CPU0: Thermal monitoring enabled mtrr: v2.0 (20020519) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. CPU0: Intel(R) Xeon(TM) CPU 2.80GHz stepping 05 Booting processor 1/1 eip 2000 CPU 1 irqstacks, hard=c0449000 soft=c0429000 Initializing CPU#1 Calibrating delay using timer specific routine.. 5581.81 BogoMIPS (lpj=11163622) CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 0 CPU: After all inits, caps: bfebf3ff 00000000 00000000 00000080 00004400 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel P4/Xeon Extended MCE MSRs (12) available CPU1: Thermal monitoring enabled CPU1: Intel(R) Xeon(TM) CPU 2.80GHz stepping 05 Booting processor 2/6 eip 2000 CPU 2 irqstacks, hard=c044a000 soft=c042a000 Initializing CPU#2 Calibrating delay using timer specific routine.. 5581.93 BogoMIPS (lpj=11163871) CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 3 CPU: After all inits, caps: bfebf3ff 00000000 00000000 00000080 00004400 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#2. CPU2: Intel P4/Xeon Extended MCE MSRs (12) available CPU2: Thermal monitoring enabled CPU2: Intel(R) Xeon(TM) CPU 2.80GHz stepping 05 Booting processor 3/7 eip 2000 CPU 3 irqstacks, hard=c044b000 soft=c042b000 Initializing CPU#3 Calibrating delay using timer specific routine.. 5582.11 BogoMIPS (lpj=11164230) CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 3 CPU: After all inits, caps: bfebf3ff 00000000 00000000 00000080 00004400 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#3. CPU3: Intel P4/Xeon Extended MCE MSRs (12) available CPU3: Thermal monitoring enabled CPU3: Intel(R) Xeon(TM) CPU 2.80GHz stepping 05 Total of 4 processors activated (22333.63 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 pin1=2 pin2=-1 checking TSC synchronization across 4 CPUs: passed. Brought up 4 CPUs checking if image is initramfs... it is Freeing initrd memory: 1980k freed NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=7 PCI: Using configuration type 1 ACPI: Subsystem revision 20050916 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO PCI quirk: region 0500-053f claimed by ICH4 GPIO PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 Boot video device is 0000:07:0c.0 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1.P1P2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1.P1P3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4.P4P5._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4.P4P6._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 11 devices usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Bridge: 0000:01:1d.0 IO window: 9000-9fff MEM window: fc400000-fc4fffff PREFETCH window: ff300000-ff3fffff PCI: Bridge: 0000:01:1f.0 IO window: a000-afff MEM window: fc500000-fc5fffff PREFETCH window: ff400000-ff4fffff PCI: Bridge: 0000:00:02.0 IO window: 9000-afff MEM window: fc400000-fc6fffff PREFETCH window: ff300000-ff5fffff PCI: Bridge: 0000:04:1d.0 IO window: b000-bfff MEM window: fc700000-fc7fffff PREFETCH window: ff600000-ff6fffff PCI: Bridge: 0000:04:1f.0 IO window: c000-cfff MEM window: fc800000-fc8fffff PREFETCH window: ff700000-ff7fffff PCI: Bridge: 0000:00:03.0 IO window: b000-cfff MEM window: fc700000-fc9fffff PREFETCH window: ff600000-ff8fffff PCI: Bridge: 0000:00:1e.0 IO window: d000-dfff MEM window: fca00000-feafffff PREFETCH window: ff900000-ff9fffff PCI: Setting latency timer of device 0000:00:1e.0 to 64 apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) apm: disabled - APM is not SMP safe. audit: initializing netlink socket (disabled) audit(1138059504.676:1): initialized highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API ksign: Installing public key data Loading keyring - Added public key 86D1D7472B6BE898 - User ID: Red Hat, Inc. (Kernel Module GPG key) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: CPU0 (power states: C1[C1]) ACPI: Processor [CPU1] (supports 8 throttling states) ACPI: CPU2 (power states: C1[C1]) ACPI: CPU1 (power states: C1[C1]) ACPI: CPU3 (power states: C1[C1]) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12 Linux agpgart interface v0.101 (c) Dave Jones PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 controller doesn't have AUX irq; using default 12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 32 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH3: IDE controller at PCI slot 0000:00:1f.1 PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 169 ICH3: chipset revision 2 ICH3: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:DMA Probing IDE interface ide0... hda: QUANTUM FIREBALL ST2.1A, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdd: ST3120022A, ATA DISK drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: 4124736 sectors (2111 MB) w/81KiB Cache, CHS=4092/16/63, UDMA(33) hda: cache flushes not supported hda: hda1 hdd: max request size: 1024KiB hdd: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100) hdd: cache flushes supported hdd: hdd1 ide-floppy driver 0.99.newide usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver mice: PS/2 mouse device common for all mice md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 3.39 NET: Registered protocol family 2 input: AT Translated Set 2 keyboard on isa0060/serio0 IP route cache hash table entries: 131072 (order: 7, 524288 bytes) TCP established hash table entries: 131072 (order: 9, 2621440 bytes) TCP bind hash table entries: 65536 (order: 8, 1310720 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered TCP bic registered Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI Shortcut mode Freeing unused kernel memory: 224k freed Write protecting the kernel read-only data: 336k SCSI subsystem initialized libata version 1.12 loaded. sata_promise version 1.02 ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 52 (level, low) -> IRQ 177 ata1: SATA max UDMA/133 cmd 0xF8806200 ctl 0xF8806238 bmdma 0x0 irq 177 ata2: SATA max UDMA/133 cmd 0xF8806280 ctl 0xF88062B8 bmdma 0x0 irq 177 ata3: SATA max UDMA/133 cmd 0xF8806300 ctl 0xF8806338 bmdma 0x0 irq 177 ata4: SATA max UDMA/133 cmd 0xF8806380 ctl 0xF88063B8 bmdma 0x0 irq 177 ata1: SATA link up 1.5 Gbps (SStatus 113) ata1: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4023 85:3469 86:3c01 87:4023 88:407f ata1: dev 0 ATA, max UDMA/133, 488397168 sectors: lba48 ata1: dev 0 configured for UDMA/133 scsi0 : sata_promise ata2: SATA link up 1.5 Gbps (SStatus 113) ata2: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4023 85:3469 86:3c01 87:4023 88:407f ata2: dev 0 ATA, max UDMA/133, 488397168 sectors: lba48 ata2: dev 0 configured for UDMA/133 scsi1 : sata_promise ata3: SATA link up 1.5 Gbps (SStatus 113) ata3: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4023 85:3469 86:3c01 87:4023 88:407f ata3: dev 0 ATA, max UDMA/133, 488397168 sectors: lba48 ata3: dev 0 configured for UDMA/133 scsi2 : sata_promise ata4: SATA link up 1.5 Gbps (SStatus 113) ata4: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4023 85:3469 86:3c01 87:4023 88:407f ata4: dev 0 ATA, max UDMA/133, 488397168 sectors: lba48 ata4: dev 0 configured for UDMA/133 scsi3 : sata_promise Vendor: ATA Model: ST3250823AS Rev: 3.01 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) SCSI device sda: drive cache: write back SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) SCSI device sda: drive cache: write back sda: sda1 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 Vendor: ATA Model: ST3250823AS Rev: 3.01 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB) SCSI device sdb: drive cache: write back SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB) SCSI device sdb: drive cache: write back sdb: sdb1 Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0 Vendor: ATA Model: ST3250823AS Rev: 3.01 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sdc: 488397168 512-byte hdwr sectors (250059 MB) SCSI device sdc: drive cache: write back SCSI device sdc: 488397168 512-byte hdwr sectors (250059 MB) SCSI device sdc: drive cache: write back sdc: sdc1 Attached scsi disk sdc at scsi2, channel 0, id 0, lun 0 Vendor: ATA Model: ST3250823AS Rev: 3.01 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sdd: 488397168 512-byte hdwr sectors (250059 MB) SCSI device sdd: drive cache: write back SCSI device sdd: 488397168 512-byte hdwr sectors (250059 MB) SCSI device sdd: drive cache: write back sdd: sdd1 Attached scsi disk sdd at scsi3, channel 0, id 0, lun 0 ACPI: PCI Interrupt 0000:05:02.0[A] -> GSI 96 (level, low) -> IRQ 185 ata5: SATA max UDMA/133 cmd 0xF882A200 ctl 0xF882A238 bmdma 0x0 irq 185 ata6: SATA max UDMA/133 cmd 0xF882A280 ctl 0xF882A2B8 bmdma 0x0 irq 185 ata7: SATA max UDMA/133 cmd 0xF882A300 ctl 0xF882A338 bmdma 0x0 irq 185 ata8: SATA max UDMA/133 cmd 0xF882A380 ctl 0xF882A3B8 bmdma 0x0 irq 185 ata5: SATA link up 1.5 Gbps (SStatus 113) ata5: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4023 85:3469 86:3c01 87:4023 88:407f ata5: dev 0 ATA, max UDMA/133, 488397168 sectors: lba48 ata5: dev 0 configured for UDMA/133 scsi4 : sata_promise ata6: SATA link up 1.5 Gbps (SStatus 113) ata6: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4023 85:3469 86:3c01 87:4023 88:407f ata6: dev 0 ATA, max UDMA/133, 488397168 sectors: lba48 ata6: dev 0 configured for UDMA/133 scsi5 : sata_promise ata7: SATA link up 1.5 Gbps (SStatus 113) ata7: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4023 85:3469 86:3c01 87:4023 88:407f ata7: dev 0 ATA, max UDMA/133, 488397168 sectors: lba48 ata7: dev 0 configured for UDMA/133 scsi6 : sata_promise ata8: SATA link up 1.5 Gbps (SStatus 113) ata8: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4023 85:3469 86:3c01 87:4023 88:407f ata8: dev 0 ATA, max UDMA/133, 488397168 sectors: lba48 ata8: dev 0 configured for UDMA/133 scsi7 : sata_promise Vendor: ATA Model: ST3250823AS Rev: 3.04 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sde: 488397168 512-byte hdwr sectors (250059 MB) SCSI device sde: drive cache: write back SCSI device sde: 488397168 512-byte hdwr sectors (250059 MB) SCSI device sde: drive cache: write back sde: unknown partition table Attached scsi disk sde at scsi4, channel 0, id 0, lun 0 Vendor: ATA Model: ST3250823AS Rev: 3.03 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sdf: 488397168 512-byte hdwr sectors (250059 MB) SCSI device sdf: drive cache: write back SCSI device sdf: 488397168 512-byte hdwr sectors (250059 MB) SCSI device sdf: drive cache: write back sdf: unknown partition table Attached scsi disk sdf at scsi5, channel 0, id 0, lun 0 Vendor: ATA Model: ST3250823AS Rev: 3.03 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sdg: 488397168 512-byte hdwr sectors (250059 MB) SCSI device sdg: drive cache: write back SCSI device sdg: 488397168 512-byte hdwr sectors (250059 MB) SCSI device sdg: drive cache: write back sdg: unknown partition table Attached scsi disk sdg at scsi6, channel 0, id 0, lun 0 Vendor: ATA Model: ST3250824AS Rev: 3.AA Type: Direct-Access ANSI SCSI revision: 05 SCSI device sdh: 488397168 512-byte hdwr sectors (250059 MB) SCSI device sdh: drive cache: write back SCSI device sdh: 488397168 512-byte hdwr sectors (250059 MB) SCSI device sdh: drive cache: write back sdh: unknown partition table Attached scsi disk sdh at scsi7, channel 0, id 0, lun 0 ACPI: PCI Interrupt 0000:06:02.0[A] -> GSI 72 (level, low) -> IRQ 193 ata9: SATA max UDMA/133 cmd 0xF882C200 ctl 0xF882C238 bmdma 0x0 irq 193 ata10: SATA max UDMA/133 cmd 0xF882C280 ctl 0xF882C2B8 bmdma 0x0 irq 193 ata11: SATA max UDMA/133 cmd 0xF882C300 ctl 0xF882C338 bmdma 0x0 irq 193 ata12: SATA max UDMA/133 cmd 0xF882C380 ctl 0xF882C3B8 bmdma 0x0 irq 193 ata9: SATA link up 1.5 Gbps (SStatus 113) ata9: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4023 85:3469 86:3c01 87:4023 88:407f ata9: dev 0 ATA, max UDMA/133, 488397168 sectors: lba48 ata9: dev 0 configured for UDMA/133 scsi8 : sata_promise ata10: SATA link up 1.5 Gbps (SStatus 113) ata10: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4023 85:3469 86:3c01 87:4023 88:407f ata10: dev 0 ATA, max UDMA/133, 488397168 sectors: lba48 ata10: dev 0 configured for UDMA/133 scsi9 : sata_promise ata11: SATA link up 1.5 Gbps (SStatus 113) ata11: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4023 85:3469 86:3c01 87:4023 88:407f ata11: dev 0 ATA, max UDMA/133, 488397168 sectors: lba48 ata11: dev 0 configured for UDMA/133 scsi10 : sata_promise ata12: SATA link up 1.5 Gbps (SStatus 113) ata12: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4023 85:3469 86:3c01 87:4023 88:407f ata12: dev 0 ATA, max UDMA/133, 488397168 sectors: lba48 ata12: dev 0 configured for UDMA/133 scsi11 : sata_promise Vendor: ATA Model: ST3250823AS Rev: 3.04 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sdi: 488397168 512-byte hdwr sectors (250059 MB) SCSI device sdi: drive cache: write back SCSI device sdi: 488397168 512-byte hdwr sectors (250059 MB) SCSI device sdi: drive cache: write back sdi: sdi1 Attached scsi disk sdi at scsi8, channel 0, id 0, lun 0 Vendor: ATA Model: ST3250823AS Rev: 3.04 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sdj: 488397168 512-byte hdwr sectors (250059 MB) SCSI device sdj: drive cache: write back SCSI device sdj: 488397168 512-byte hdwr sectors (250059 MB) SCSI device sdj: drive cache: write back sdj: sdj1 Attached scsi disk sdj at scsi9, channel 0, id 0, lun 0 Vendor: ATA Model: ST3250823AS Rev: 3.04 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sdk: 488397168 512-byte hdwr sectors (250059 MB) SCSI device sdk: drive cache: write back SCSI device sdk: 488397168 512-byte hdwr sectors (250059 MB) SCSI device sdk: drive cache: write back sdk: sdk1 Attached scsi disk sdk at scsi10, channel 0, id 0, lun 0 Vendor: ATA Model: ST3250823AS Rev: 3.04 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sdl: 488397168 512-byte hdwr sectors (250059 MB) SCSI device sdl: drive cache: write back SCSI device sdl: 488397168 512-byte hdwr sectors (250059 MB) SCSI device sdl: drive cache: write back sdl: sdl1 Attached scsi disk sdl at scsi11, channel 0, id 0, lun 0 device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com raid5: automatically using best checksumming function: pIII_sse pIII_sse : 3612.000 MB/sec raid5: using function: pIII_sse (3612.000 MB/sec) md: raid5 personality registered as nr 4 md: Autodetecting RAID arrays. md: invalid raid superblock magic on sda1 md: sda1 has invalid sb, not importing! md: invalid raid superblock magic on sdb1 md: sdb1 has invalid sb, not importing! md: invalid raid superblock magic on sdc1 md: sdc1 has invalid sb, not importing! md: invalid raid superblock magic on sdd1 md: sdd1 has invalid sb, not importing! md: autorun ... md: ... autorun DONE. md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. ReiserFS: dm-4: found reiserfs format "3.6" with standard journal ReiserFS: dm-4: using ordered data mode ReiserFS: dm-4: journal params: device dm-4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: dm-4: checking transaction log (dm-4) ReiserFS: dm-4: Using r5 hash to sort names SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 Intel(R) PRO/1000 Network Driver - version 6.0.60-k2-NAPI Copyright (c) 1999-2005 Intel Corporation. ACPI: PCI Interrupt 0000:03:02.0[A] -> GSI 24 (level, low) -> IRQ 201 e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection shpchp: shpc_init : shpc_cap_offset == 0 shpchp: shpc_init : shpc_cap_offset == 0 shpchp: shpc_init : shpc_cap_offset == 0 shpchp: shpc_init : shpc_cap_offset == 0 shpchp: shpc_init : shpc_cap_offset == 0 shpchp: shpc_init : shpc_cap_offset == 0 shpchp: shpc_init : shpc_cap_offset == 0 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 hw_random hardware driver 1.0.0 loaded USB Universal Host Controller Interface driver v2.3 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 209 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 209, io base 0x0000ec00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 217 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 217, io base 0x0000e880 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: irq 169, io base 0x0000e800 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: Power Button (FF) [PWRF] ibm_acpi: ec object not found md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. kjournald starting. Commit interval 5 seconds EXT3 FS on hda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. ReiserFS: dm-5: found reiserfs format "3.6" with standard journal ReiserFS: dm-5: using ordered data mode ReiserFS: dm-5: journal params: device dm-5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: dm-5: checking transaction log (dm-5) ReiserFS: dm-5: Using r5 hash to sort names ReiserFS: dm-1: found reiserfs format "3.6" with standard journal ReiserFS: dm-1: using ordered data mode ReiserFS: dm-1: journal params: device dm-1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: dm-1: checking transaction log (dm-1) ReiserFS: dm-1: Using r5 hash to sort names ReiserFS: dm-2: found reiserfs format "3.6" with standard journal ReiserFS: dm-2: using ordered data mode ReiserFS: dm-2: journal params: device dm-2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: dm-2: checking transaction log (dm-2) ReiserFS: dm-2: Using r5 hash to sort names ReiserFS: dm-3: found reiserfs format "3.6" with standard journal ReiserFS: dm-3: using ordered data mode ReiserFS: dm-3: journal params: device dm-3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: dm-3: checking transaction log (dm-3) ReiserFS: dm-3: Using r5 hash to sort names ReiserFS: dm-0: found reiserfs format "3.6" with standard journal ReiserFS: dm-0: using ordered data mode ReiserFS: dm-0: journal params: device dm-0, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: dm-0: checking transaction log (dm-0) ReiserFS: dm-0: Using r5 hash to sort names Adding 2097144k swap on /dev/vg_data/lv_swap. Priority:-1 extents:1 across:2097144k e1000: eth0: e1000_watchdog_task: NIC Link is Up 100 Mbps Full Duplex Bluetooth: Core ver 2.7 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.7 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM ver 1.5 Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized NET: Registered protocol family 10 Disabled Privacy Extensions on device c0397f80(lo) IPv6 over IPv4 tunneling driver Installing knfsd (copyright (C) 1996 okir@monad.swb.de). NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory NFSD: recovery directory /var/lib/nfs/v4recovery doesn't exist NFSD: starting 90-second grace period eth0: no IPv6 routers present ata3: status=0x51 { DriveReady SeekComplete Error } ata3: error=0x0c { DriveStatusError } ata3: status=0x51 { DriveReady SeekComplete Error } ata3: error=0x0c { DriveStatusError } ata2: status=0x51 { DriveReady SeekComplete Error } ata2: error=0x0c { DriveStatusError } ata2: status=0x51 { DriveReady SeekComplete Error } ata2: error=0x0c { DriveStatusError } ata2: status=0x51 { DriveReady SeekComplete Error } ata2: error=0x0c { DriveStatusError } ata2: status=0x51 { DriveReady SeekComplete Error } ata2: error=0x0c { DriveStatusError } [root@terminus ~]# lspci -vvv: [root@terminus ~]# lspci -vvv 00:00.0 Host bridge: Intel Corporation E7501 Memory Controller Hub (rev 01) Subsystem: Intel Corporation E7501 Memory Controller Hub Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B- 00:03.0 PCI bridge: Intel Corporation E7500/E7501 Hub Interface C PCI-to-PCI Bridge (rev 01) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B- 00:1d.0 USB Controller: Intel Corporation 82801CA/CAM USB (Hub #1) (rev 02) (prog-if 00 [UHCI]) Subsystem: Gateway 2000: Unknown device 891f Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B- 00:1f.0 ISA bridge: Intel Corporation 82801CA LPC Interface Controller (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- Region 1: I/O ports at Region 2: I/O ports at Region 3: I/O ports at Region 4: I/O ports at ffa0 [size=16] Region 5: Memory at 88000000 (32-bit, non-prefetchable) [size=1K] 00:1f.3 SMBus: Intel Corporation 82801CA/CAM SMBus Controller (rev 02) Subsystem: Gateway 2000: Unknown device 891f Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [50] PCI-X bridge device. Secondary Status: 64bit+, 133MHz+, SCD-, USC-, SCO-, SRD- Freq=0 Status: Bus=1 Dev=29 Func=0 64bit+ 133MHz+ SCD- USC-, SCO-, SRD- : Upstream: Capacity=65535, Commitment Limit=65535 : Downstream: Capacity=65535, Commitment Limit=65535 01:1e.0 PIC: Intel Corporation 82870P2 P64H2 I/OxAPIC (rev 04) (prog-if 20 [IO(X)-APIC]) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [50] PCI-X bridge device. Secondary Status: 64bit+, 133MHz+, SCD-, USC-, SCO-, SRD- Freq=3 Status: Bus=1 Dev=31 Func=0 64bit+ 133MHz+ SCD- USC-, SCO-, SRD- : Upstream: Capacity=65535, Commitment Limit=65535 : Downstream: Capacity=65535, Commitment Limit=65535 02:02.0 Mass storage controller: Promise Technology, Inc. PDC20318 (SATA150 TX4) (rev 02) Subsystem: Promise Technology, Inc. PDC20318 (SATA150 TX4) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [50] PCI-X bridge device. Secondary Status: 64bit+, 133MHz+, SCD-, USC-, SCO-, SRD- Freq=0 Status: Bus=4 Dev=29 Func=0 64bit+ 133MHz+ SCD- USC-, SCO-, SRD- : Upstream: Capacity=65535, Commitment Limit=65535 : Downstream: Capacity=65535, Commitment Limit=65535 04:1e.0 PIC: Intel Corporation 82870P2 P64H2 I/OxAPIC (rev 04) (prog-if 20 [IO(X)-APIC]) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [50] PCI-X bridge device. Secondary Status: 64bit+, 133MHz+, SCD-, USC-, SCO-, SRD- Freq=0 Status: Bus=4 Dev=31 Func=0 64bit+ 133MHz+ SCD- USC-, SCO-, SRD- : Upstream: Capacity=65535, Commitment Limit=65535 : Downstream: Capacity=65535, Commitment Limit=65535 05:02.0 Mass storage controller: Promise Technology, Inc. PDC20318 (SATA150 TX4) (rev 02) Subsystem: Promise Technology, Inc. PDC20318 (SATA150 TX4) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR-