From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tejun Heo Subject: Re: libata hotplug and md raid? Date: Wed, 13 Sep 2006 20:06:41 +0900 Message-ID: <4507E641.7090508@gmail.com> References: <4507E2A9.7070306@emc.com> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <4507E2A9.7070306@emc.com> Sender: linux-ide-owner@vger.kernel.org To: Ric Wheeler Cc: Leon Woestenberg , linux-raid@vger.kernel.org, Greg KH , "linux-ide@vger.kernel.org" List-Id: linux-raid.ids Ric Wheeler wrote: > (Adding Tejun & Greg KH to this thread) Adding linux-ide to this thread. > > Leon Woestenberg wrote: [--snip--] >> In short, I use ext3 over /dev/md0 over 4 SATA drives /dev/sd[a-d] >> each driven by libata ahci. I unplug then replug the drive that is >> rebuilding in RAID-5. >> >> When I unplug a drive, /dev/sda is removed, hotplug seems to work to >> the point where proc/mdstat shows the drive failed, but not removed. Yeap, that sounds about right. >> Every other notion of the drive (in kernel and udev /dev namespace) >> seems to be gone after unplugging. I cannot manually removed the drive >> using mdadm, because it tells me the drive does not exist. I see. That's a problem. Can you use /dev/.static/dev/sda instead? If you can't find those static nodes, just create one w/ 'mknod my-static-sda b 8 0' and use it. >> Replugging the drive brings it back as /dev/sde, md0 will not pick it up. No, it won't. > I have a similar setup, AHCI + 4 drives but using a RAID-1 group. The > thing that you are looking for is "persistent device naming" and should > work properly if you can tweak udev/hotplug correctly. > > I have verified that a drive pull/drive reinsert on a mainline kernel > with a SLES10 base does provide this (first insertion gives me sdb, pull > followed by reinsert still is sdb), but have not tested interaction with > RAID since I am focused on the bad block handling at the moment. I will > add this to my list ;-) > >> >> The expected behaviour (from me) is that the drive re-appears as >> /dev/sda. Apart from persistent naming Ric mentioned above, the reason why you don't get sda back is md is holding the internal device. It's removed from all visible name spaces but md still holds a reference, so the device cannot be destroyed. So, when a new device comes along, sda is occupied by the dead device, and the new one gets the next available slot, which happens to be sde in your case. >> What is the intended behaviour of md in this case? >> >> Should some user-space application fail-remove a drive as a pre-action >> of the unplug event from udev, or should md fully remove the drive >> within kernel space?? I'm curious too. Would it be better for md to listen to hotplug events and auto-remove dead devices or is it something which belongs to userland? Thanks. -- tejun