From mboxrd@z Thu Jan  1 00:00:00 1970
From: Bill Davidsen <davidsen@tmr.com>
Subject: Re: md0: invalid bitmap page request: 249 (> 223)
Date: Thu, 12 Apr 2007 12:28:47 -0400
Message-ID: <461E5E3F.4070108@tmr.com>
References: <17950.22648.37421.148022@smtp.charter.net>
Mime-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
Return-path: <linux-raid-owner@vger.kernel.org>
In-Reply-To: <17950.22648.37421.148022@smtp.charter.net>
Sender: linux-raid-owner@vger.kernel.org
To: John Stoffel <john@stoffel.org>
Cc: linux-raid@vger.kernel.org
List-Id: linux-raid.ids

John Stoffel wrote:
> Hi Neil,
>
> I've just installed a new SATA controller and a pair of 320Gb disks
> into my system.  Went great.  I'm running 2.6.21-rc6, with the ATA
> drivers for my disks.
>
> I had a RAID1 mirror consisting of two 120gb disks.  I used mdadm and
> grew the number of disks in md0 to four, then added in the two new
> disks.  Let it resync overnight, and then this morning I removed the
> two old disks.  Went really really really well.
>
> But now I'm trying to grow (using mdadm v2.5.6, Debian unstable
> system) the array to use the full space now available.  Then I'll grow
> the PVs and LVs I have on top of these to make them bigger as well.
>
> The re-sync is going:
>
>     > cat /proc/mdstat
>     Personalities : [linear] [raid0] [raid1] [raid10] [raid6] [raid5]
>     [raid4] 
>     md0 : active raid1 sdd1[1] sdc1[0]
> 	  312568000 blocks [2/2] [UU]
> 	  [========>............]  resync = 42.1% (131637248/312568000)
>     finish=373264.5min speed=0K/sec
> 	  bitmap: 1/224 pages [4KB], 256KB chunk
>
>     unused devices: <none>
>
>
> But it's going slowly and dragging down the whole system with pauses,
> and I'm getting tons of the following messages in my dmesg output:
>
>     [50683.698708] md0: invalid bitmap page request: 251 (> 223)
>     [50683.763687] md0: invalid bitmap page request: 251 (> 223)
>     [50683.828621] md0: invalid bitmap page request: 251 (> 223)
>     [50683.893520] md0: invalid bitmap page request: 251 (> 223)
>     [50683.958396] md0: invalid bitmap page request: 251 (> 223)
>     [50684.023265] md0: invalid bitmap page request: 251 (> 223)
>     [50684.088202] md0: invalid bitmap page request: 251 (> 223)
>     [50684.153196] md0: invalid bitmap page request: 251 (> 223)
>     [50684.218129] md0: invalid bitmap page request: 251 (> 223)
>     [50684.283044] md0: invalid bitmap page request: 251 (> 223)
>
>
> Is there anyway I can interrupt the command I used:
>
> 	mdadm --grow /dev/md0 --size=#####
>
> which I know now I should have used the --size=max paramter instead,
> but it wasn't in the man page or the online help.  Oh well...
>
> I tried removing the bitmap with:
>
> 	mdadm --grow /dev/md0 --bitmap=none
>
> but of course it won't let me do that.  Would I have to hot-fail one
> of my disks to interrupt the re-sync, so I can remove the bitmap, so I
> can then grow the RAID1 to the max volume size?
>   
I think you could interrupt it by echoing 'idle' to the sync_action, but 
I personally wouldn't do that, since there are indications of some 
problem already, and doing another unusual thing is not prudent. I doubt 
you problems are caused by specifying the size rather than using "max," 
unless you got it wrong, in which case I wouldn't guess what is going to 
happen.

-- 
bill davidsen <davidsen@tmr.com>
  CTO TMR Associates, Inc
  Doing interesting things with small computers since 1979