From: Bill Davidsen <davidsen@tmr.com>
To: Berni <wstripes@gmx.at>
Cc: linux-raid@vger.kernel.org
Subject: Re: raid problem: after every reboot /dev/sdb1 is removed?
Date: Sat, 02 Feb 2008 14:47:50 -0500 [thread overview]
Message-ID: <47A4C8E6.4070402@tmr.com> (raw)
In-Reply-To: <20080201135220.617194ff@berni>
Berni wrote:
> Hi!
>
> I have the following problem with my softraid (raid 1). I'm running
> Ubuntu 7.10 64bit with kernel 2.6.22-14-generic.
>
> After every reboot my first boot partition in md0 is not synchron. One
> of the disks (the sdb1) is removed.
> After a resynch every partition is synching. But after a reboot the
> state is "removed".
>
> The disks are new and both seagate 250gb with exactly the same partition table.
>
>
Did you create the raid arrays and then install on them? Or add them
after the fact? I have seen this type of problem when the initrd doesn't
start the array before pivotroot, usually because the raid capabilities
aren't in the boot image. In that case rerunning grub and mkinitrd may help.
I run raid on Redhat distributions, and some Slackware, so I can't speak
for Ubuntu from great experience, but that's what it sounds like. When
you boot, is the /boot mounted on a degraded array or on the raw partition?
> Here some config files:
>
> #cat /proc/mdstat
> Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5]
> [raid4] [raid10]
> md2 : active raid1 sda6[0] sdb6[1]
> 117185984 blocks [2/2] [UU]
>
> md1 : active raid1 sda5[0] sdb5[1]
> 1951744 blocks [2/2] [UU]
>
> md0 : active raid1 sda1[0]
> 19534912 blocks [2/1] [U_] <<<<<<<< this is the problem: looks like U_ after reboot
>
> unused devices: <none>
>
> #fdisk /dev/sda
> Device Boot Start End Blocks Id System
> /dev/sda1 1 2432 19535008+ fd Linux raid
> autodetect
> /dev/sda2 2433 17264 119138040 5 Extended
> /dev/sda3 * 17265 20451 25599577+ 7 HPFS/NTFS
> /dev/sda4 20452 30400 79915342+ 7 HPFS/NTFS
> /dev/sda5 2433 2675 1951866 fd Linux raid
> autodetect
> /dev/sda6 2676 17264 117186111 fd Linux raid
> autodetect
>
> #fdisk /dev/sdb
> Device Boot Start End Blocks Id System
> /dev/sdb1 1 2432 19535008+ fd Linux raid
> autodetect
> /dev/sdb2 2433 17264 119138040 5 Extended
> /dev/sdb3 17265 30400 105514920 7 HPFS/NTFS
> /dev/sdb5 2433 2675 1951866 fd Linux raid
> autodetect
> /dev/sdb6 2676 17264 117186111 fd Linux raid
> autodetect
>
> # mount
> /dev/md0 on / type reiserfs (rw,notail)
> proc on /proc type proc (rw,noexec,nosuid,nodev)
> /sys on /sys type sysfs (rw,noexec,nosuid,nodev)
> varrun on /var/run type tmpfs (rw,noexec,nosuid,nodev,mode=0755)
> varlock on /var/lock type tmpfs (rw,noexec,nosuid,nodev,mode=1777)
> udev on /dev type tmpfs (rw,mode=0755)
> devshm on /dev/shm type tmpfs (rw)
> devpts on /dev/pts type devpts (rw,gid=5,mode=620)
> lrm on /lib/modules/2.6.22-14-generic/volatile type tmpfs (rw)
> /dev/md2 on /home type reiserfs (rw)
> securityfs on /sys/kernel/security type securityfs (rw)
>
> Could anyone help me to solve this problem?
> thanks
> greets
> Berni
> -
> To unsubscribe from this list: send the line "unsubscribe linux-raid" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
>
--
Bill Davidsen <davidsen@tmr.com>
"Woe unto the statesman who makes war without a reason that will still
be valid when the war is over..." Otto von Bismark
next prev parent reply other threads:[~2008-02-02 19:47 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-02-01 12:52 raid problem: after every reboot /dev/sdb1 is removed? Berni
2008-02-01 13:46 ` Greg Cormier
2008-02-01 17:22 ` Berni
2008-02-02 2:32 ` Neil Brown
2008-02-02 19:47 ` Bill Davidsen [this message]
[not found] ` <20080203023001.066852a6@berni>
2008-02-03 15:34 ` Bill Davidsen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=47A4C8E6.4070402@tmr.com \
--to=davidsen@tmr.com \
--cc=linux-raid@vger.kernel.org \
--cc=wstripes@gmx.at \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).