From: Bill Davidsen <davidsen@tmr.com>
To: Berni <wstripes@gmx.at>, Linux RAID <linux-raid@vger.kernel.org>
Subject: Re: raid problem: after every reboot /dev/sdb1 is removed?
Date: Sun, 03 Feb 2008 10:34:13 -0500 [thread overview]
Message-ID: <47A5DEF5.5040202@tmr.com> (raw)
In-Reply-To: <20080203023001.066852a6@berni>
Berni wrote:
> Hi
>
> I created the raid arrays during install with the text-installer-cd.
> So first the raid array was created and then the system was installed on it.
>
>
> I don't have a extra /boot partition its on the root (/) partition and the root is the md0 in the raid. Every partition for ubuntu (also swap) is in the raid.
>
> What exactly means rerunning grub? (to put both hdd into the mbr)?
> I can't find the "mkinitrd" into ubuntu. I made a update-initramfs but it didn't help.
>
>
I think you need some ubuntu guru to help, I always create a small raid1
for /boot and then use other arrays for whatever the system is doing. I
don't know if ubuntu uses mkinitrd or what, but it clearly didn't get it
right without a little help from you.
> thanks
>
How about some input, ubuntu users (or Debian, isn't ubuntu really Debian?).
>
> On Sat, 02 Feb 2008 14:47:50 -0500
> Bill Davidsen <davidsen@tmr.com> wrote:
>
>
>> Berni wrote:
>>
>>> Hi!
>>>
>>> I have the following problem with my softraid (raid 1). I'm running
>>> Ubuntu 7.10 64bit with kernel 2.6.22-14-generic.
>>>
>>> After every reboot my first boot partition in md0 is not synchron. One
>>> of the disks (the sdb1) is removed.
>>> After a resynch every partition is synching. But after a reboot the
>>> state is "removed".
>>>
>>> The disks are new and both seagate 250gb with exactly the same partition table.
>>>
>>>
>>>
>> Did you create the raid arrays and then install on them? Or add them
>> after the fact? I have seen this type of problem when the initrd doesn't
>> start the array before pivotroot, usually because the raid capabilities
>> aren't in the boot image. In that case rerunning grub and mkinitrd may help.
>>
>> I run raid on Redhat distributions, and some Slackware, so I can't speak
>> for Ubuntu from great experience, but that's what it sounds like. When
>> you boot, is the /boot mounted on a degraded array or on the raw partition?
>>
--
Bill Davidsen <davidsen@tmr.com>
"Woe unto the statesman who makes war without a reason that will still
be valid when the war is over..." Otto von Bismark
prev parent reply other threads:[~2008-02-03 15:34 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-02-01 12:52 raid problem: after every reboot /dev/sdb1 is removed? Berni
2008-02-01 13:46 ` Greg Cormier
2008-02-01 17:22 ` Berni
2008-02-02 2:32 ` Neil Brown
2008-02-02 19:47 ` Bill Davidsen
[not found] ` <20080203023001.066852a6@berni>
2008-02-03 15:34 ` Bill Davidsen [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=47A5DEF5.5040202@tmr.com \
--to=davidsen@tmr.com \
--cc=linux-raid@vger.kernel.org \
--cc=wstripes@gmx.at \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).