From: Richard Scobie <richard@sauce.co.nz>
To: Linux RAID Mailing List <linux-raid@vger.kernel.org>
Subject: Re: RAID1 == two different ARRAY in scan, and Q on read error corrected
Date: Sat, 19 Apr 2008 15:15:28 +1200 [thread overview]
Message-ID: <480963D0.70307@sauce.co.nz> (raw)
In-Reply-To: <A20315AE59B5C34585629E258D76A97C087DAB@34093-C3-EVS3.exchange.rackspace.com>
David Lethe wrote:
> You can't assume a disk is losing sectors and failing without running
> some diagnostics. If you had an improper shutdown (i.e, power loss, not
> a crash), and disks were writing, then you can get ECC errors. That
> does not indicate the disk is bad.
The error was:
Apr 18 14:01:45 smartd[2104]: Device: /dev/sdc, 3 Currently unreadable
(pending) sectors
These are not ECC errors and the definition I have for pending sector
errors is, "Current count of unstable sectors (waiting for remapping)."
It would be useful to see the Reallocated Sectors Count from the
smartctl output.
Regards,
Richard
next prev parent reply other threads:[~2008-04-19 3:15 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-04-18 19:35 RAID1 == two different ARRAY in scan, and Q on read error corrected Phil Lobbes
2008-04-18 22:02 ` Richard Scobie
2008-04-18 23:49 ` David Lethe
2008-04-19 3:15 ` Richard Scobie [this message]
2008-04-19 17:26 ` Phil Lobbes
2008-04-19 19:58 ` Richard Scobie
2008-04-19 20:43 ` David Lethe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=480963D0.70307@sauce.co.nz \
--to=richard@sauce.co.nz \
--cc=linux-raid@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).