From mboxrd@z Thu Jan 1 00:00:00 1970 From: Richard Scobie Subject: Re: single RAID slower than aggregate multi-RAID? Date: Sat, 16 Aug 2008 09:53:15 +1200 Message-ID: <48A5FACB.2090302@sauce.co.nz> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: Sender: linux-raid-owner@vger.kernel.org To: Justin Piszcz Cc: Jan Wagner , linux-raid@vger.kernel.org List-Id: linux-raid.ids Justin Piszcz wrote: > Because you are using port-multipliers, they do not allocate full > bandwidth to each HDD simultaneously. You will get a maximum of 3gbps > per each port, but if you are reading from 12 ports into a single 3gbps > port? Jan's setup is 3 drives on each port multiplier, which are each attached to a port on the controller, so should be just on the limit of the 3Gb/s link between controller and multiplier. According to this, with the same controller and 12 portmultiplied Seagate drives on a Mac, in one single RAID 0, you should see just under 700MB/s peak, so there may be room for improvement yet. http://www.amug.org/amug-web/html/amug/reviews/articles/addonics/adsa3gpx8-4em/ Regards, Richard