From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tejun Heo Subject: Re: exception Emask 0x0 SAct 0x1 / SErr 0x0 action 0x2 frozen Date: Sat, 04 Oct 2008 11:27:13 +0900 Message-ID: <48E6D481.7050407@kernel.org> References: <3E6D0C24877245C3A5A327129A7B4CA7@909927SOSLA> <5419A02543384E69AF2BA82FF6E66C14@909927SOSLA> <4B1ABD0393EF40FFB0A12242FE8356AF@909927SOSLA> <48DBAB81.8050900@tmr.com> <48E08E2D.6050905@kernel.org> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: Sender: linux-ide-owner@vger.kernel.org To: Justin Piszcz Cc: "Mr. James W. Laferriere" , Tom Mortensen , Bill Davidsen , Gwendal Grignou , Brian Rademacher , linux-ide@vger.kernel.org, linux-raid maillist , Linux Kernel Maillist , Bruce Allen List-Id: linux-raid.ids Justin Piszcz wrote: > [469680.004654] ata2.00: status: { DRDY } > [469680.004660] ata2: hard resetting link > [469680.309567] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > [469680.333461] ata2.00: configured for UDMA/133 > [469680.333477] ata2: EH complete > [469680.333461] sd 1:0:0:0: [sdb] 586072368 512-byte hardware sectors > (300069 MB) > [469680.340461] sd 1:0:0:0: [sdb] Write Protect is off > [469680.340461] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 > [469680.345461] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: > enabled, doesn't support DPO or FUA You're leaving the good part out. Please always attach full kernel log. Thanks. -- tejun