From: Bill Davidsen <davidsen@tmr.com>
To: Jeffrey Ross <jeff@bubble.org>
Cc: David Greaves <david@dgreaves.com>,
linux-raid maillist <linux-raid@vger.kernel.org>
Subject: Re: RAID issue (Fedora 9 issue?)
Date: Mon, 06 Oct 2008 15:28:17 -0400 [thread overview]
Message-ID: <48EA66D1.6050703@tmr.com> (raw)
In-Reply-To: <48E89E27.3030102@bubble.org>
Jeffrey Ross wrote:
>
>
> David Greaves wrote:
>>
>>> I have verified the contents of the
>>> /etc/mdadm.conf file that the UUID's are correct
>>>
>>
>> Which mdadm.conf? The one on /dev/md6?
>> Youy need to check/update the one in the initrd.
>>
>> Shouldn't have changed though unless you did a rebuild or something.
>>
>
> uh... you nailed it... the mdadm.conf in the initrd (which I didn't
> realize existed) was out of sync with the /etc/mdadm.conf and had the
> incorrect UUID numbers. I had mistakenly updated it installed a
> kernel update then realized it was wrong corrected it back but didn't
> rebuild the initrd file.
I suggested that the config in the initrd was wrong in the same post
which suggested that you ask in linux-raid. In the previous sentence, as
a matter of fact.
>>> What has changed? Not 100% sure, I have installed a handful of new
>>> patches recently since the last reboot and unfortunately I don't know
>>> which ones so there are a lot of possibilities.
>>>
>> OK
>> Kernel patches? Or rpms?
>>
> The answer is yes to both, but obviously it was due to my (incorrect)
> tinkering.
>> David
>>
>>
> Thank you again... its always nice to learn something new about the
> system.
--
Bill Davidsen <davidsen@tmr.com>
"Woe unto the statesman who makes war without a reason that will still
be valid when the war is over..." Otto von Bismark
prev parent reply other threads:[~2008-10-06 19:28 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-10-05 1:38 RAID issue (Fedora 9 issue?) Jeffrey Ross
2008-10-05 9:49 ` David Greaves
2008-10-05 10:59 ` Jeffrey Ross
2008-10-06 19:28 ` Bill Davidsen [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=48EA66D1.6050703@tmr.com \
--to=davidsen@tmr.com \
--cc=david@dgreaves.com \
--cc=jeff@bubble.org \
--cc=linux-raid@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).