From: Richard Scobie <richard@sauce.co.nz>
To: Linux RAID <linux-raid@vger.kernel.org>
Cc: Rainer Fuegenstein <rfu@kaneda.iguw.tuwien.ac.at>
Subject: Re: resync duration ?
Date: Fri, 15 May 2009 07:38:38 +1200 [thread overview]
Message-ID: <4A0C733E.9010306@sauce.co.nz> (raw)
In-Reply-To: <20090514180747.GA9995@atlantis.cc.ndsu.NoDak.edu>
Bryan Mesich wrote:
> On Thu, May 14, 2009 at 06:06:51PM +0100, John Robinson wrote:
>
>>I think about 160 minutes is reasonable for 750GB, on an otherwise
>>unloaded box; it's only 70MB/sec off 3 drives and on to 1 newer, faster
>>drive.
>
>
> I have a similar setup with 4 750G SATA drives. The box is
> failry beefy, with 8 processor cores and a PCI-E SATA controler
> (3Ware 9650SE). For an initial sync, it will take about 315
> minutes to complete.
>
> I'm not sure if this is a fair comparison, since Rainer was do a
> resync.
>
> md8 : active raid5 sdx1[4] sdw1[2] sdv1[1] sdu1[0]
> 2197209600 blocks level 5, 64k chunk, algorithm 2 [4/3] [UUU_]
> [>....................] recovery = 1.6% (12015536/732403200) finish=312.3min speed=38437K/sec
>
> I'm probably splitting hairs at this point.
>
> Bryan
Just to add another data point, I replaced a dead 750GB drive in 4 x 750
md RAID5 last week and it took 145 minutes.
Resync on another 16 x 750GB md RAID6 takes around 180min.
Regards,
Richard
next prev parent reply other threads:[~2009-05-14 19:38 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-05-14 13:06 resync duration ? Rainer Fuegenstein
2009-05-14 13:58 ` Bryan Mesich
2009-05-14 16:26 ` Ryan Wagoner
2009-05-14 17:03 ` Re[2]: " Rainer Fuegenstein
2009-05-14 17:06 ` John Robinson
2009-05-14 18:07 ` Bryan Mesich
2009-05-14 19:38 ` Richard Scobie [this message]
2009-05-15 1:22 ` Neil Brown
2009-05-15 4:04 ` Leslie Rhorer
2009-05-15 4:44 ` NeilBrown
2009-05-15 5:07 ` Leslie Rhorer
2009-05-15 20:21 ` Richard Scobie
2009-05-15 21:51 ` Neil Brown
2009-05-16 2:47 ` Richard Scobie
2009-05-16 8:10 ` NeilBrown
2009-05-18 15:00 ` Bill Davidsen
2009-05-28 16:43 ` John Robinson
2009-05-15 11:16 ` Rainer Fuegenstein
2009-05-18 15:02 ` Bill Davidsen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4A0C733E.9010306@sauce.co.nz \
--to=richard@sauce.co.nz \
--cc=linux-raid@vger.kernel.org \
--cc=rfu@kaneda.iguw.tuwien.ac.at \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).