From: "Stefan /*St0fF*/ Hübner" <stefan.huebner@stud.tu-ilmenau.de>
To: Linux RAID <linux-raid@vger.kernel.org>
Subject: Re: WD20EARS data
Date: Mon, 29 Mar 2010 19:13:27 +0200 [thread overview]
Message-ID: <4BB0DFB7.9080302@stud.tu-ilmenau.de> (raw)
In-Reply-To: <4BB0DC78.5080506@stud.tu-ilmenau.de>
Am 29.03.2010 18:59, schrieb Stefan /*St0fF*/ Hübner:
> Hi @all,
>
> I tested the WD20EARS at work today. They correctly report NO SCT ERC
> ability (unlike WDxxEADS from November 2009 on). Trying the commands
> nevertheless results in "command aborted".
>
> So my recommendation would be: if you need a fast large array and want
> to use WD, keep enough redundancy and a cold spare. (Respectively
> because I returned 2 drives to Western Digital today, too. They had
> reallocated and pending sectors >100 and already dropped out of RAIDs.)
>
> Or use Hitachi deskstar HDS722020ALA330 - these can set ERC timeouts and
> they cost about the same. We have sold about 10 times as many Hitachis
> compared to WDs, but had about the same amount of defective drives.
I'm sorry, the comparison is with the elder WD20EADS! Sorry...
>
> All the best,
> Stefan
> --
> To unsubscribe from this list: send the line "unsubscribe linux-raid" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2010-03-29 17:13 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-03-25 16:20 Use of WD20EARS with MDADM Andrew Dunn
2010-03-25 17:01 ` Asdo
2010-03-25 17:58 ` Mark Knecht
2010-03-25 20:23 ` John Robinson
2010-03-26 10:45 ` Asdo
2010-03-25 17:10 ` David Lethe
2010-03-25 17:45 ` Asdo
2010-03-28 16:19 ` Stefan *St0fF* Huebner
2010-03-29 16:59 ` WD20EARS data Stefan /*St0fF*/ Hübner
2010-03-29 17:13 ` Stefan /*St0fF*/ Hübner [this message]
2010-04-14 19:53 ` Use of WD20EARS with MDADM Bill Davidsen
2010-04-19 14:17 ` Phillip Susi
2010-04-21 13:20 ` Bill Davidsen
2010-04-21 13:45 ` Tim Small
2010-04-21 14:32 ` Mikael Abrahamsson
2010-04-21 21:58 ` Berkey B Walker
2010-05-02 22:33 ` Bill Davidsen
2010-05-03 0:08 ` Berkey B Walker
2010-04-21 15:14 ` Phillip Susi
2010-04-21 16:42 ` Bill Davidsen
2010-04-21 17:36 ` Mark Knecht
2010-04-21 18:40 ` Tim Small
2010-04-21 19:01 ` Mark Knecht
2010-04-21 19:31 ` Clinton Lee Taylor
2010-04-22 0:51 ` Steven Haigh
2010-04-21 19:33 ` Phillip Susi
2010-04-21 20:36 ` Mark Knecht
2010-05-12 13:06 ` Tim Small
2010-04-22 11:40 ` wdidle3 Tim Small
2010-04-22 16:13 ` Use of WD20EARS with MDADM Khelben Blackstaff
2010-04-22 18:16 ` Simon Matthews
2010-04-22 19:44 ` Phillip Susi
2010-04-22 23:23 ` Mark Knecht
2010-04-23 0:03 ` Richard Scobie
2010-04-23 1:29 ` Mark Knecht
2010-04-23 3:49 ` Phillip Susi
2010-04-23 3:44 ` Phillip Susi
2010-04-21 15:52 ` Simon Matthews
2010-04-21 19:24 ` Richard Scobie
2010-03-26 20:27 ` Peter Kieser
2010-03-26 20:59 ` Mark Knecht
2010-03-26 21:01 ` Peter Kieser
2010-03-26 21:06 ` Mark Knecht
2010-03-26 21:16 ` Mark Knecht
2010-03-26 21:19 ` Richard Scobie
2010-03-26 22:38 ` Mark Knecht
2010-03-26 22:47 ` Peter Kieser
2010-03-26 22:50 ` Matt Garman
2010-03-26 22:51 ` Peter Kieser
2010-03-26 23:01 ` David Rees
2010-03-27 23:31 ` Mark Knecht
2010-03-26 21:45 ` Matt Garman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4BB0DFB7.9080302@stud.tu-ilmenau.de \
--to=stefan.huebner@stud.tu-ilmenau.de \
--cc=linux-raid@vger.kernel.org \
--cc=st0ff@npl.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).