* failed to re-assemble after cable-problem...
@ 2010-08-01 18:28 wiebittewas
0 siblings, 0 replies; only message in thread
From: wiebittewas @ 2010-08-01 18:28 UTC (permalink / raw)
To: linux-raid
well, ext4 fails with IO-errors, so I checked the disks of the raid
and found, that's something wrong with the cables...
after an exchange of cables I tried a "mdadm --assemble --force",
but result was that the missing devices are only added as
spare-drives, not as active ones.
well maybe, there are errors in filesystem, but the raid should be
ok, so how can I change the disk from spare to active?
maybe setting the right info directly in superblock of the disk?
any help would be appreciated
wiebittewas
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2010-08-01 18:28 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-08-01 18:28 failed to re-assemble after cable-problem wiebittewas
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).