linux-raid.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: John Robinson <john.robinson@anonymous.org.uk>
To: Matt Garman <matthew.garman@gmail.com>
Cc: Linux RAID <linux-raid@vger.kernel.org>
Subject: Re: [Slightly OT] Cheap 4-port PCI-E SATA card?
Date: Mon, 03 Jan 2011 15:29:20 +0000	[thread overview]
Message-ID: <4D21EB50.7060301@anonymous.org.uk> (raw)
In-Reply-To: <AANLkTimDZR0ZFaXT49UL7DQttEtWJ2X2Rkc40UAD6VkS@mail.gmail.com>

On 02/01/2011 23:04, Matt Garman wrote:
> On Sun, Jan 2, 2011 at 3:11 PM, John Robinson
> <john.robinson@anonymous.org.uk>  wrote:
>> Please could someone suggest a cheap PCI-E SATA card with 4 internal ports?
>>
>> I currently have 6 motherboard SATA ports and a 5-drive hot-swap chassis, I
>> am thinking of adding a second 5-drive hot-swap chassis to my case and would
>> need another 4 SATA ports to drive it.
>>
>> Other requirements: known to work with RHEL/CentOS 5 kernels, even if it
>> means installing a driver with DKMS or whatever.
>
> You can also get a SAS card, and an overpriced mini-SAS to SATA cable.
>   The LSI SAS 1068e chip is quite common and well supported by Linux.
> You can buy LSI-branded cards, or from another OEM that uses the same
> chip.  Intel makes such a card, and I just read that IBM does as well,
> the ServeRAID BR10i LSI SAS3082E-R.  Covered in detail here:
>
>      http://www.servethehome.com/ibm-serveraid-br10i-lsi-sas3082e-r-pciexpress-sas-raid-controller/
>
> Such a card will actually give you a total of eight SATA ports, but
> you obviously don't have to use them all; you can get away with only
> buying one of the SAS to 4-SATA port fanout cables.
>
> I grabbed two of those IBM BR10i cards off of ebay for about $50.
> Unfortunately, I didn't pay close attention to the listing, and mine
> came without PCI brackets.  But so far I've tested one, and it works
> just fine.

I've just had a look on eBay and the few there are don't have brackets 
in their pictures. But still, this is definitely an option, looks like I 
might be able to pick one up for about £50, which was pretty much the 
most I really wanted to spend. More like £60 by the time I've got the 
cable, but I would have another 4 spare SATA ports :-)

>> Doesn't have to be PCI-E x1 because I've a spare x8 (logical)/x16 (physical)
>> slot, but I don't know if anything cheap's going to be anything other than
>> PCI-E x1. v2.0 (5GT/s) would be nice though.
>
> If you're using a typical consumer-grade motherboard, watch out that
> the PCIe slot supports things other than video cards.  For whatever
> reason, particularly on micro-ATX boards, the PCIe x8/x16 slots often
> won't work with anything other than video cards.  Trying to use
> something else (e.g. a RAID card) will, at best, prohibit the machine
> from booting, or at worst, cause very subtle random problems.

It's an Asus P5Q Pro, Intel P45+ICH10R, a fairly boring basic 
workstation grade (not gaming) full ATX motherboard, and if it doesn't 
like having something other than a video card in its second x16 slot 
I'll start screaming at Asus.

Thanks for your advice!

Cheers,

John.
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  reply	other threads:[~2011-01-03 15:29 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-01-02 21:11 [Slightly OT] Cheap 4-port PCI-E SATA card? John Robinson
2011-01-02 22:31 ` Roman Mamedov
2011-01-03 15:11   ` John Robinson
2011-01-03 16:08     ` Roman Mamedov
2011-01-03 17:02     ` Sven Eschenberg
2011-01-02 22:41 ` Mark Knecht
2011-01-03 15:13   ` John Robinson
2011-01-03 17:57     ` Mark Knecht
2011-01-02 23:04 ` Matt Garman
2011-01-03 15:29   ` John Robinson [this message]
2011-01-03 15:35     ` Justin Piszcz
2011-01-03  6:41 ` Stan Hoeppner
2011-01-03 16:00   ` John Robinson
2011-01-03 22:18     ` Stan Hoeppner
2011-01-04 14:03       ` John Robinson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4D21EB50.7060301@anonymous.org.uk \
    --to=john.robinson@anonymous.org.uk \
    --cc=linux-raid@vger.kernel.org \
    --cc=matthew.garman@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).