From: Zdenek Kaspar <zkaspar82@gmail.com>
To: linux-raid@vger.kernel.org
Subject: Re: high throughput storage server?
Date: Tue, 15 Feb 2011 15:56:07 +0100 [thread overview]
Message-ID: <4D5A9407.5000508@gmail.com> (raw)
In-Reply-To: <AANLkTimT=JLvBTU52aZDYC5gwryXmsp4F+WbzsJNbSCC@mail.gmail.com>
Dne 15.2.2011 15:29, Roberto Spadim napsal(a):
> first, run memtest86 (if you use x86 cpu)
> check ram memory speed
> my hp (ml350g5 very old: 2005) get 2500MB/s (~20 Gbits/s)
>
> maybe ram is a bottleneck for 50gbits....
> you will need a multi computer raid or stripe fileaccess operations
> (database on one machine, s.o. on another...)
>
> for hobby = SATA2 disks, 50USD disks of 1TB 50MB/s
> the today state of art, in 'my world' is: http://www.ramsan.com/products/3
I doubt 20TB SLC which will survive huge abuse (writes) is low-cost
solution what OP wants to build himself..
or 20TB RAM omg..
Z.
next prev parent reply other threads:[~2011-02-15 14:56 UTC|newest]
Thread overview: 116+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-02-14 23:59 high throughput storage server? Matt Garman
2011-02-15 2:06 ` Doug Dumitru
2011-02-15 4:44 ` Matt Garman
2011-02-15 5:49 ` hansbkk
2011-02-15 9:43 ` David Brown
2011-02-24 20:28 ` Matt Garman
2011-02-24 20:43 ` David Brown
2011-02-15 15:16 ` Joe Landman
2011-02-15 20:37 ` NeilBrown
2011-02-15 20:47 ` Joe Landman
2011-02-15 21:41 ` NeilBrown
2011-02-24 20:58 ` Matt Garman
2011-02-24 21:20 ` Joe Landman
2011-02-26 23:54 ` high throughput storage server? GPFS w/ 10GB/s throughput to the rescue Stan Hoeppner
2011-02-27 0:56 ` Joe Landman
2011-02-27 14:55 ` Stan Hoeppner
2011-03-12 22:49 ` Matt Garman
2011-02-27 21:30 ` high throughput storage server? Ed W
2011-02-28 15:46 ` Joe Landman
2011-02-28 23:14 ` Stan Hoeppner
2011-02-28 22:22 ` Stan Hoeppner
2011-03-02 3:44 ` Matt Garman
2011-03-02 4:20 ` Joe Landman
2011-03-02 7:10 ` Roberto Spadim
2011-03-02 19:03 ` Drew
2011-03-02 19:20 ` Roberto Spadim
2011-03-13 20:10 ` Christoph Hellwig
2011-03-14 12:27 ` Stan Hoeppner
2011-03-14 12:47 ` Christoph Hellwig
2011-03-18 13:16 ` Stan Hoeppner
2011-03-18 14:05 ` Christoph Hellwig
2011-03-18 15:43 ` Stan Hoeppner
2011-03-18 16:21 ` Roberto Spadim
2011-03-18 22:01 ` NeilBrown
2011-03-18 22:23 ` Roberto Spadim
2011-03-20 1:34 ` Stan Hoeppner
2011-03-20 3:41 ` NeilBrown
2011-03-20 5:32 ` Roberto Spadim
2011-03-20 23:22 ` Stan Hoeppner
2011-03-21 0:52 ` Roberto Spadim
2011-03-21 2:44 ` Keld Jørn Simonsen
2011-03-21 3:13 ` Roberto Spadim
2011-03-21 3:14 ` Roberto Spadim
2011-03-21 17:07 ` Stan Hoeppner
2011-03-21 14:18 ` Stan Hoeppner
2011-03-21 17:08 ` Roberto Spadim
2011-03-21 22:13 ` Keld Jørn Simonsen
2011-03-22 9:46 ` Robin Hill
2011-03-22 10:14 ` Keld Jørn Simonsen
2011-03-23 8:53 ` Stan Hoeppner
2011-03-23 15:57 ` Roberto Spadim
2011-03-23 16:19 ` Joe Landman
2011-03-24 8:05 ` Stan Hoeppner
2011-03-24 13:12 ` Joe Landman
2011-03-25 7:06 ` Stan Hoeppner
2011-03-24 17:07 ` Christoph Hellwig
2011-03-24 5:52 ` Stan Hoeppner
2011-03-24 6:33 ` NeilBrown
2011-03-24 8:07 ` Roberto Spadim
2011-03-24 8:31 ` Stan Hoeppner
2011-03-22 10:00 ` Stan Hoeppner
2011-03-22 11:01 ` Keld Jørn Simonsen
2011-02-15 12:29 ` Stan Hoeppner
2011-02-15 12:45 ` Roberto Spadim
2011-02-15 13:03 ` Roberto Spadim
2011-02-24 20:43 ` Matt Garman
2011-02-24 20:53 ` Zdenek Kaspar
2011-02-24 21:07 ` Joe Landman
2011-02-15 13:39 ` David Brown
2011-02-16 23:32 ` Stan Hoeppner
2011-02-17 0:00 ` Keld Jørn Simonsen
2011-02-17 0:19 ` Stan Hoeppner
2011-02-17 2:23 ` Roberto Spadim
2011-02-17 3:05 ` Stan Hoeppner
2011-02-17 0:26 ` David Brown
2011-02-17 0:45 ` Stan Hoeppner
2011-02-17 10:39 ` David Brown
2011-02-24 20:49 ` Matt Garman
2011-02-15 13:48 ` Zdenek Kaspar
2011-02-15 14:29 ` Roberto Spadim
2011-02-15 14:51 ` A. Krijgsman
2011-02-15 16:44 ` Roberto Spadim
2011-02-15 14:56 ` Zdenek Kaspar [this message]
2011-02-24 20:36 ` Matt Garman
2011-02-17 11:07 ` John Robinson
2011-02-17 13:36 ` Roberto Spadim
2011-02-17 13:54 ` Roberto Spadim
2011-02-17 21:47 ` Stan Hoeppner
2011-02-17 22:13 ` Joe Landman
2011-02-17 23:49 ` Stan Hoeppner
2011-02-18 0:06 ` Joe Landman
2011-02-18 3:48 ` Stan Hoeppner
2011-02-18 13:49 ` Mattias Wadenstein
2011-02-18 23:16 ` Stan Hoeppner
2011-02-21 10:25 ` Mattias Wadenstein
2011-02-21 21:51 ` Stan Hoeppner
2011-02-22 8:57 ` David Brown
2011-02-22 9:30 ` Mattias Wadenstein
2011-02-22 9:49 ` David Brown
2011-02-22 13:38 ` Stan Hoeppner
2011-02-22 14:18 ` David Brown
2011-02-23 5:52 ` Stan Hoeppner
2011-02-23 13:56 ` David Brown
2011-02-23 14:25 ` John Robinson
2011-02-23 15:15 ` David Brown
2011-02-23 23:14 ` Stan Hoeppner
2011-02-24 10:19 ` David Brown
2011-02-23 21:59 ` Stan Hoeppner
2011-02-23 23:43 ` John Robinson
2011-02-24 15:53 ` Stan Hoeppner
2011-02-23 21:11 ` Stan Hoeppner
2011-02-24 11:24 ` David Brown
2011-02-24 23:30 ` Stan Hoeppner
2011-02-25 8:20 ` David Brown
2011-02-19 0:24 ` Joe Landman
2011-02-21 10:04 ` Mattias Wadenstein
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4D5A9407.5000508@gmail.com \
--to=zkaspar82@gmail.com \
--cc=linux-raid@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).