From: Simon McNair <simonmcnair@gmail.com>
To: Phil Turmel <philip@turmel.org>
Cc: NeilBrown <neilb@suse.de>, linux-raid@vger.kernel.org
Subject: Re: Linux software RAID assistance
Date: Wed, 16 Feb 2011 19:07:13 +0000 [thread overview]
Message-ID: <4D5C2061.4060106@gmail.com> (raw)
In-Reply-To: <4D5C1E0B.9060300@turmel.org>
pvscan is:
proxmox:/home/simon# pvscan --verbose
Wiping cache of LVM-capable devices
Wiping internal VG cache
Walking through all physical volumes
PV /dev/sda2 VG pve lvm2 [465.26 GB / 4.00 GB free]
PV /dev/md0 VG lvm-raid lvm2 [8.19 TB / 0 free]
Total: 2 [655.05 GB] / in use: 2 [655.05 GB] / in no VG: 0 [0 ]
lvm-raid is there ....
proxmox:/home/simon# fsck.ext4 -n /dev/md0
e2fsck 1.41.3 (12-Oct-2008)
fsck.ext4: Superblock invalid, trying backup blocks...
Superblock has an invalid ext3 journal (inode 8).
Clear? no
fsck.ext4: Illegal inode number while checking ext3 journal for /dev/md0
I thought I needed to run fsck against the lvm group ? I used to do...
fsck.ext4 /dev/lvm-raid/RAID so do I need to mount it or something ?
cheers
Simon
On 16/02/2011 18:57, Phil Turmel wrote:
> On 02/16/2011 01:52 PM, Simon McNair wrote:
>> have done this.... Results are:
>>
>> proxmox:/home/simon# ./lsdrv.sh
>> Controller device @ pci0000:00/0000:00:01.0/0000:01:00.0 [mvsas]
>> SCSI storage controller: Marvell Technology Group Ltd. MV64460/64461/64462 System Controller, Revision B (rev 01)
>> host0: /dev/sdf ATA Hitachi HDS72101 {SN: GTA000PAGABXRA}
>> host0: /dev/sdg ATA Hitachi HDS72101 {SN: GTA000PAGAA5DA}
>> host0: /dev/sdh ATA Hitachi HDS72101 {SN: GTA000PAG9NL9A}
>> host0: /dev/sdi ATA Hitachi HDS72101 {SN: GTA000PAGA8V4A}
>> host0: /dev/sdj ATA Hitachi HDS72101 {SN: GTD000PAGMT9GD}
>> host0: /dev/sdk ATA Hitachi HDS72101 {SN: GTG000PAG18BJC}
>> host0: /dev/sdl ATA Hitachi HDS72101 {SN: GTG000PAG1DPLC}
>> host0: /dev/sdm ATA Hitachi HDS72101 {SN: GTA000PAG7WMEA}
>> Controller device @ pci0000:00/0000:00:1a.7/usb1/1-4/1-4.1/1-4.1.1/1-4.1.1:1.0 [usb-storage]
>> Bus 001 Device 007: ID 0424:2228 Standard Microsystems Corp. 9-in-2 Card Reader {SN: 08050920003A}
>> host11: /dev/sdb Generic Flash HS-CF
>> host11: /dev/sdc Generic Flash HS-COMBO
>> Controller device @ pci0000:00/0000:00:1c.4/0000:04:00.0 [ahci]
>> SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03)
>> host9: [Empty]
>> host10: [Empty]
>> Controller device @ pci0000:00/0000:00:1c.4/0000:04:00.1 [pata_jmicron]
>> IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03)
>> host1: [Empty]
>> host2: [Empty]
>> Controller device @ pci0000:00/0000:00:1f.2 [ahci]
>> SATA controller: Intel Corporation 82801JI (ICH10 Family) SATA AHCI Controller
>> host3: /dev/sda ATA STM3500418AS {SN: 9VM3QJ5C}
>> host4: /dev/sr0 Optiarc DVD RW AD-5240S
>> host5: [Empty]
>> host6: [Empty]
>> host7: /dev/sdd ATA Hitachi HDS72101 {SN: GTD000PAGMT8DD}
>> host8: /dev/sde ATA Hitachi HDS72101 {SN: GTG000PAG04V0C}
>>
>> enabling achi has switched the drive letters around for a couple of drives again
>>
>> parted list is:
>>
>> proxmox:/home/simon# for x in /dev/sd{i,h,g,f,m,l,k,j,d,e} ; do parted -s $x unit s print ; done
>> Model: ATA Hitachi HDS72101 (scsi)
>> Disk /dev/sdi: 1953525168s
>> Sector size (logical/physical): 512B/512B
>> Partition Table: gpt
>>
>> Number Start End Size File system Name Flags
>> 1 2048s 1953101823s 1953099776s primary raid
>>
>> Model: ATA Hitachi HDS72101 (scsi)
>> Disk /dev/sdh: 1953525168s
>> Sector size (logical/physical): 512B/512B
>> Partition Table: gpt
>>
>> Number Start End Size File system Name Flags
>> 1 2048s 1953101823s 1953099776s primary raid
>>
>> Model: ATA Hitachi HDS72101 (scsi)
>> Disk /dev/sdg: 1953525168s
>> Sector size (logical/physical): 512B/512B
>> Partition Table: gpt
>>
>> Number Start End Size File system Name Flags
>> 1 2048s 1953101823s 1953099776s primary raid
>>
>> Model: ATA Hitachi HDS72101 (scsi)
>> Disk /dev/sdf: 1953525168s
>> Sector size (logical/physical): 512B/512B
>> Partition Table: gpt
>>
>> Number Start End Size File system Name Flags
>> 1 2048s 1953101823s 1953099776s primary raid
>>
>> Model: ATA Hitachi HDS72101 (scsi)
>> Disk /dev/sdm: 1953525168s
>> Sector size (logical/physical): 512B/512B
>> Partition Table: gpt
>>
>> Number Start End Size File system Name Flags
>> 1 2048s 1953101823s 1953099776s primary raid
>>
>> Model: ATA Hitachi HDS72101 (scsi)
>> Disk /dev/sdl: 1953525168s
>> Sector size (logical/physical): 512B/512B
>> Partition Table: gpt
>>
>> Number Start End Size File system Name Flags
>> 1 2048s 1953101823s 1953099776s primary raid
>>
>> Model: ATA Hitachi HDS72101 (scsi)
>> Disk /dev/sdk: 1953525168s
>> Sector size (logical/physical): 512B/512B
>> Partition Table: gpt
>>
>> Number Start End Size File system Name Flags
>> 1 2048s 1953101823s 1953099776s primary raid
>>
>> Model: ATA Hitachi HDS72101 (scsi)
>> Disk /dev/sdj: 1953525168s
>> Sector size (logical/physical): 512B/512B
>> Partition Table: gpt
>>
>> Number Start End Size File system Name Flags
>> 1 2048s 1953101823s 1953099776s primary raid
>>
>> Model: ATA Hitachi HDS72101 (scsi)
>> Disk /dev/sdd: 1953525168s
>> Sector size (logical/physical): 512B/512B
>> Partition Table: gpt
>>
>> Number Start End Size File system Name Flags
>> 1 2048s 1953101823s 1953099776s primary raid
>>
>> Model: ATA Hitachi HDS72101 (scsi)
>> Disk /dev/sde: 1953525168s
>> Sector size (logical/physical): 512B/512B
>> Partition Table: gpt
>>
>> Number Start End Size File system Name Flags
>> 1 2048s 1953101823s 1953099776s primary raid
> All looks good.
>
>> is it now:
>>
>> mdadm --create --verbose --assume-clean /dev/md0 --metadata=1.1 --level=5 --raid-devices=10 /dev/sd{i,h,g,f,m,l,k,j,d,e}1 --chunk=64
> Yes.
>
> Phil
next prev parent reply other threads:[~2011-02-16 19:07 UTC|newest]
Thread overview: 64+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-02-10 16:16 Linux software RAID assistance Simon McNair
2011-02-10 18:24 ` Phil Turmel
2011-02-15 4:53 ` NeilBrown
2011-02-15 8:48 ` Simon McNair
2011-02-15 14:51 ` Phil Turmel
2011-02-15 19:04 ` Simon McNair
2011-02-15 19:37 ` Phil Turmel
2011-02-15 19:45 ` Roman Mamedov
2011-02-15 21:09 ` Simon McNair
2011-02-17 15:10 ` Simon Mcnair
2011-02-17 15:42 ` Roman Mamedov
2011-02-18 9:13 ` Simon McNair
2011-02-18 9:38 ` Robin Hill
2011-02-18 10:38 ` Simon Mcnair
2011-02-19 11:46 ` Jan Ceuleers
2011-02-19 12:40 ` Simon McNair
2011-02-19 17:37 ` Jan Ceuleers
2011-02-16 13:51 ` Simon McNair
2011-02-16 14:37 ` Phil Turmel
2011-02-16 17:49 ` Simon McNair
2011-02-16 18:14 ` Phil Turmel
2011-02-16 18:18 ` Simon McNair
2011-02-16 18:22 ` Phil Turmel
2011-02-16 18:25 ` Phil Turmel
2011-02-16 18:52 ` Simon McNair
2011-02-16 18:57 ` Phil Turmel
2011-02-16 19:07 ` Simon McNair [this message]
2011-02-16 19:10 ` Phil Turmel
2011-02-16 19:15 ` Simon McNair
2011-02-16 19:36 ` Phil Turmel
2011-02-16 21:28 ` Simon McNair
2011-02-16 21:30 ` Phil Turmel
2011-02-16 22:44 ` Simon Mcnair
2011-02-16 23:39 ` Phil Turmel
2011-02-17 13:26 ` Simon Mcnair
2011-02-17 13:48 ` Phil Turmel
2011-02-17 13:56 ` Simon Mcnair
2011-02-17 14:34 ` Simon Mcnair
2011-02-17 16:54 ` Phil Turmel
2011-02-19 8:43 ` Simon Mcnair
2011-02-19 15:30 ` Phil Turmel
[not found] ` <AANLkTinOXJWRw_et2U43R_T9XPBzQLnN56Kf2bOAz=_c@mail.gmail.com>
2011-02-19 16:19 ` Phil Turmel
2011-02-20 9:56 ` Simon Mcnair
2011-02-20 19:50 ` Phil Turmel
2011-02-20 23:17 ` Simon Mcnair
2011-02-20 23:39 ` Phil Turmel
2011-02-22 17:12 ` Simon Mcnair
2011-02-22 17:14 ` Simon Mcnair
2011-02-22 18:23 ` Phil Turmel
2011-02-22 18:36 ` Simon McNair
2011-02-22 19:06 ` Phil Turmel
2011-02-18 9:31 ` Simon Mcnair
2011-02-18 13:16 ` Phil Turmel
2011-02-18 13:21 ` Roberto Spadim
2011-02-18 13:26 ` Phil Turmel
2011-02-18 13:29 ` Simon Mcnair
2011-02-18 13:34 ` Phil Turmel
2011-02-18 14:12 ` Simon McNair
2011-02-18 16:10 ` Phil Turmel
2011-02-18 16:38 ` Roberto Spadim
[not found] ` <AANLkTi=RmR5nVnmFLuqK5anHc3WDPxjuYjitT6+5wAqS@mail.gmail.com>
2011-02-20 18:48 ` Phil Turmel
2011-02-20 19:25 ` Simon Mcnair
2011-02-19 8:49 ` Simon Mcnair
2011-02-16 13:56 ` Simon McNair
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4D5C2061.4060106@gmail.com \
--to=simonmcnair@gmail.com \
--cc=linux-raid@vger.kernel.org \
--cc=neilb@suse.de \
--cc=philip@turmel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).