* Raid1 info (not active degraded raid)
@ 2011-06-01 16:32 Pol Hallen
2011-06-01 17:34 ` Phil Turmel
0 siblings, 1 reply; 2+ messages in thread
From: Pol Hallen @ 2011-06-01 16:32 UTC (permalink / raw)
To: linux-raid
Hi folks :-)
I build a raid1 with mdadm. For purpose test I disconnected a disk and raid1
runs perfectly.
After reboot /dev/md1 (raid1) doesn't appear by cat /proc/mdstat
(I have also a raid6 on /dev/md0)
mdadm -E /dev/sdh (a disk of raid1) show me correct raid
How I start this raid?
raid6 works so mdadm runs.
thanks and sorry for my bad english :-@
Pol
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: Raid1 info (not active degraded raid)
2011-06-01 16:32 Raid1 info (not active degraded raid) Pol Hallen
@ 2011-06-01 17:34 ` Phil Turmel
0 siblings, 0 replies; 2+ messages in thread
From: Phil Turmel @ 2011-06-01 17:34 UTC (permalink / raw)
Cc: linux-raid
On 06/01/2011 12:32 PM, Pol Hallen wrote:
> Hi folks :-)
>
> I build a raid1 with mdadm. For purpose test I disconnected a disk and raid1
> runs perfectly.
>
> After reboot /dev/md1 (raid1) doesn't appear by cat /proc/mdstat
>
> (I have also a raid6 on /dev/md0)
>
> mdadm -E /dev/sdh (a disk of raid1) show me correct raid
>
> How I start this raid?
Look at kernel parameter "md-mod.start_dirty_degraded=1"
> raid6 works so mdadm runs.
>
> thanks and sorry for my bad english :-@
Your english is fine. Your return address is not so nice. I'm somewhat surprised it got through my spam filters. It won't again.
HTH,
Phil
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2011-06-01 17:34 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-06-01 16:32 Raid1 info (not active degraded raid) Pol Hallen
2011-06-01 17:34 ` Phil Turmel
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).