From: "Marcin M. Jessa" <lists@yazzy.org>
To: linux-raid@vger.kernel.org
Subject: Recovery of failed RAID 6 and LVM
Date: Sun, 25 Sep 2011 09:55:04 +0200 [thread overview]
Message-ID: <4E7EDE58.3000804@yazzy.org> (raw)
Hi guys.
I have a RAID 6 setup with 5 2TB drives on Debian Wheezy [1] & [2].
Yesterday 3 of the drives failed working leaving the RAID setup broken.
Following [5] I managed to start the array and make it resync.
The problem I'm facing now is I cannot access any of the LVM partitions
[3] I have on top of my md0. Fdisk says the disk doesn't contain a valid
partition table [4].
I tried to run fsck on the lvm devices without luck.
Has any of you a suggestion, a method I could use to access my data please?
[1]:
# mdadm -QD /dev/md0
/dev/md0:
Version : 1.2
Creation Time : Sat Sep 24 23:59:02 2011
Raid Level : raid6
Array Size : 5860531200 (5589.04 GiB 6001.18 GB)
Used Dev Size : 1953510400 (1863.01 GiB 2000.39 GB)
Raid Devices : 5
Total Devices : 5
Persistence : Superblock is persistent
Update Time : Sun Sep 25 09:40:20 2011
State : clean, degraded, recovering
Active Devices : 3
Working Devices : 5
Failed Devices : 0
Spare Devices : 2
Layout : left-symmetric
Chunk Size : 512K
Rebuild Status : 63% complete
Name : odin:0 (local to host odin)
UUID : be51de24:ebcc6eef:8fc41158:fc728448
Events : 10314
Number Major Minor RaidDevice State
0 8 65 0 active sync /dev/sde1
1 8 81 1 active sync /dev/sdf1
2 8 97 2 active sync /dev/sdg1
5 8 129 3 spare rebuilding /dev/sdi1
4 0 0 4 removed
6 8 113 - spare /dev/sdh1
[2]:
# cat /proc/mdstat
Personalities : [raid1] [raid6] [raid5] [raid4]
md0 : active raid6 sdh1[6](S) sdi1[5] sdg1[2] sdf1[1] sde1[0]
5860531200 blocks super 1.2 level 6, 512k chunk, algorithm 2
[5/3] [UUU__]
[=======>.............] recovery = 36.8% (720185308/1953510400)
finish=441.4min speed=46564K/sec
[3]:
# lvdisplay
Logging initialised at Sun Sep 25 09:49:11 2011
Set umask from 0022 to 0077
Finding all logical volumes
--- Logical volume ---
LV Name /dev/fridge/storage
VG Name fridge
LV UUID kIhbSq-hePX-UIVv-uuiP-iK6w-djcz-iQ3cEI
LV Write Access read/write
LV Status available
# open 0
LV Size 4.88 TiB
Current LE 1280000
Segments 1
Allocation inherit
Read ahead sectors auto
- currently set to 6144
Block device 253:0
[4]:
# fdisk -l /dev/fridge/storage
Disk /dev/fridge/storage: 5368.7 GB, 5368709120000 bytes
255 heads, 63 sectors/track, 652708 cylinders, total 10485760000 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 524288 bytes / 1572864 bytes
Disk identifier: 0x00000000
Disk /dev/fridge/storage doesn't contain a valid partition table
[5]:
http://en.wikipedia.org/wiki/Mdadm#Recovering_from_a_loss_of_raid_superblock
--
Marcin M. Jessa
next reply other threads:[~2011-09-25 7:55 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-09-25 7:55 Marcin M. Jessa [this message]
2011-09-25 8:39 ` Recovery of failed RAID 6 and LVM Stan Hoeppner
2011-09-25 10:07 ` Marcin M. Jessa
2011-09-25 13:15 ` Phil Turmel
2011-09-25 14:16 ` Marcin M. Jessa
2011-09-25 16:43 ` Phil Turmel
2011-09-25 14:41 ` Marcin M. Jessa
2011-09-25 16:19 ` Phil Turmel
2011-09-25 21:40 ` NeilBrown
2011-09-25 21:58 ` Marcin M. Jessa
2011-09-25 22:18 ` NeilBrown
2011-09-25 22:21 ` Marcin M. Jessa
[not found] ` <4E804062.3020700@yazzy.org>
2011-09-26 9:31 ` NeilBrown
2011-09-26 10:53 ` Marcin M. Jessa
2011-09-26 11:10 ` NeilBrown
2011-09-27 19:12 ` Marcin M. Jessa
2011-09-27 23:13 ` NeilBrown
2011-09-28 2:50 ` Stan Hoeppner
2011-09-28 7:10 ` Marcin M. Jessa
2011-09-28 7:51 ` David Brown
2011-09-28 16:12 ` Stan Hoeppner
2011-09-28 16:30 ` Marcin M. Jessa
2011-09-28 18:56 ` Thomas Fjellstrom
2011-09-28 19:26 ` Marcin M. Jessa
2011-09-28 19:42 ` Thomas Fjellstrom
2011-09-28 23:49 ` NeilBrown
2011-09-29 9:03 ` David Brown
2011-09-29 15:21 ` Stan Hoeppner
2011-09-29 17:14 ` David Brown
2011-09-29 18:28 ` Dan Williams
2011-09-29 23:07 ` NeilBrown
2011-09-30 0:18 ` Williams, Dan J
2011-10-05 2:15 ` NeilBrown
2011-09-28 10:38 ` Michal Soltys
2011-09-28 13:20 ` Brad Campbell
2011-09-28 19:02 ` Thomas Fjellstrom
2011-09-28 16:31 ` Stan Hoeppner
2011-09-28 16:37 ` Marcin M. Jessa
2011-09-28 19:03 ` Thomas Fjellstrom
2011-09-28 19:29 ` Marcin M. Jessa
2011-09-28 19:43 ` Thomas Fjellstrom
2011-09-30 20:01 ` Marcin M. Jessa
2011-09-30 21:47 ` Thomas Fjellstrom
2011-09-30 22:30 ` Marcin M. Jessa
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4E7EDE58.3000804@yazzy.org \
--to=lists@yazzy.org \
--cc=linux-raid@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).