From mboxrd@z Thu Jan 1 00:00:00 1970 From: =?ISO-8859-1?Q?Niccol=F2_Belli?= Subject: Re: raid1 issue after disk failure: both disks of the array are still active Date: Thu, 13 Sep 2012 17:48:01 +0200 Message-ID: <50520031.4010906@linuxsystems.it> References: <5051AF17.8010501@linuxsystems.it> <20120913103432.GA11764@cthulhu.home.robinhill.me.uk> <5051B992.7030200@linuxsystems.it> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: In-Reply-To: Sender: linux-raid-owner@vger.kernel.org To: linux-raid@vger.kernel.org List-Id: linux-raid.ids Il 13/09/2012 17:32, Roberto Spadim ha scritto: > you forced read from a block device (md0) that have a md raid1. check > in source of raid1 read balance... it don=B4t read from all disks, ju= st > from 'near/fasters' disks. I know, but since reading from md0 triggered a warning in dmesg (like=20 the previous I posted) it *did* read from the broken disk!!! Both disks= =20 of the array are still active even after the read error, why? Cheers, Niccol=F2 --=20 http://www.linuxsystems.it -- To unsubscribe from this list: send the line "unsubscribe linux-raid" i= n the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html